YEEUU YCK3510 User manual

Quick Start Guide
Accessories List
Screw Hole of Cat EyeBattery Compartment
7 8
Box Cover Fingrprint Area
Box BaseTouch Keyboard area
Storage SpacceScrew Hole
User Guide
Download the APP:
Initial State:
Keypad Description:
Led Status:
Frequently Asked Question
Opening box by APP fails
Opening box fails
Yellow light flashes when open the box
Red light flashes when open the box
No response when open the box
Login/registration cannot be performed normally
How to reset your device
Product Parameters
Identification Mode:
Fingerprint version:
Password version:
Fingerprint&Password version:
Box Material:
Box Space:
Operation Voltage:
Emergency Power Supply Interface:
Battery Life:
Operation Temperature:
Speed of Opening Box by Fingerprint :
Storage Capacity:
Fingerprint Sensor:
Failed Opening Attempts:
1
1
5
5
5
5
6
8
7
1
3
4
2
Hangzhou Ujia Technology Co., Ltd.
Product Name: YEEUU K1 Smart Lock Box
Model Name: YCK3510
Brand Name: YEEUU

� Installation methods are optional:
Installation
①Fix by self-tapping screw: Applicable to
wooden door
②Fix by expansion screw: Applicable to stone
brick, cement wall
③Fix by cat eye bolt: Applicable to the door with
cat eye
④Fix by shackle:Applicable to the door
with handle

FCC Warning
a § 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
b § 15.21 Changes or modification warning.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
c § 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
Other YEEUU Lock manuals
Popular Lock manuals by other brands

Schlage
Schlage M490DE Installation instructions and use

Dorma
Dorma EM 15000-D AM quick guide

EVVA
EVVA e-primo user guide

Motormate
Motormate Yamaha 10-303B SHO installation instructions

D&D Technologies
D&D Technologies Tru-Close Mini-Multi Adjust Hinge installation instructions

fortessa
fortessa FTBTLD user manual

D&D Technologies
D&D Technologies Lokk-Bolt Fitting instructions

M-LOCKS
M-LOCKS E-Pass Instructions for use

Taymor
Taymor 32-F218 installation instructions

Burg Wächter
Burg Wächter 610/53 Operation instructions

Yakima
Yakima DeadLock quick start guide

Assa Abloy
Assa Abloy Yale 8800 Series installation instructions