York 359583-YTG-B-0208 Quick start guide

359583-YTG-B-0208
TECHNICAL GUIDE
HIGH-EFFICIENCY
WATER SOURCE HEAT PUMPS
AND WATER COOLED
AIR CONDITIONERS
HORIZONTAL & VERTICAL MODELS
1/2 - 5 TONS
GENERAL
All Models 1/2 - 5 tons ship as factory-charged packages.
Horizontal units are designed for suspended ceiling mount-
ing. Horizontal models are shipped with ‘straight-through’
evaporator fan discharge as standard. Fan orientation is
field convertible to side discharge. Vertical units are
designed for free-standing floor mounting. All units are
completely factory wired and pre-piped. Water supply,
water outlet, and condensate drain connections are via
female pipe thread fittings.
CABINET
All cabinets are completely constructed of 18 Ga. corrosion
resistant “Galvalume” coated steel. The horizontal units are
complete with integral hanger channels. The entire unit
interior (both evaporator and condensing section) is insu-
lated with 1/2” thick, 2 lb. density insulation. Service panels
are equipped with lifting handles for ease of removal and
handling. All units provide excellent service access to the
reversing valve, thermal expansion valve, and compressor
with the unit remaining in location. An integral duct collar is
provided on the blower discharge opening. An optional dis-
charge plenum is available for Vertical models.
REFRIGERANT CIRCUITS
All models utilize hermetic rotary or reciprocating type com-
pressors. Compressors are mounted on rubber isolators to
minimize vibration transmission. Internal overload protec-
tion is provided. External high pressure and low pressure
cutout switches are included in each compressor control
circuit. Each refrigeration circuit includes an adjustable bi-
flow thermal expansion valve (with external equalizer),
bi-flow liquid line filter drier, and service gauge ports. The
reversing valve is a pilot operated, sliding piston type with a
replaceable magnetic solenoid coil.
The refrigerant-to-air heat transfer coils are constructed of
internally enhanced copper tubes mechanically bonded to
enhanced aluminum plate fins. The evaporator coil is
employed in a draw-through configuration. Large evapora-
tor coil face area minimizes potential water blow-off.
The coaxial refrigerant-to-water heat exchangers feature a
convoluted inner tube design for high heat transfer effi-
ciency. Standard models feature a copper inner tube sur-
rounded by a steel outer tube, and carry a 400 psig water
side working pressure rating.

359583-YTG-B-0208
2Johnson Controls Unitary Products
ELECTRICAL/CONTROLS
All units are completely factory wired with all necessary
operating controls. A 24 volt control circuit, with over-
size transformer, is provided for field connection. Units
are designed to operate with conventional thermostat
control interface. The reversing valve solenoid coil
shall be energized in cooling mode only. A manual
reset is provided on each compressor control circuit in
the event of high/low pressure cutout. A time delay
relay for anti-short cycle protection is standard in all
units. An optional condensate overflow switch is avail-
able, complete with an alarm output contact. An
optional remote management package allows the unit
to be controlled by an external source.
FILTERS
All models are shipped with 1 inch thick throw-away fil-
ters factory installed. Filters are accessible from either
side of unit.
PRODUCT NOMENCLATURE
Water Cooled Package Heat Pump and AC Model Number Nomenclature
RP 060 C00V 2L AB 1
Product Category
R = Watercooled ID Package,HP
Product Generation
1 = First Generation
Product Identifier
P = HP, R-22 High Efficiency
1 = 208/230-1-60
2 = 208/230-3-60
Nominal Cooling Capacity - MBH
007 = 0.5 Ton
009 = 0.75 Ton
012 = 1 Ton
018 = 1.5 Ton
024 = 2 Ton
030 = 2.5 Ton
036 = 3 Ton
048 = 4 Ton Heat Type
060 = 5 Ton C00 = No Heat Option
AA = None AG = AB + AE
AB = Insulated Water Circuit(Not available on cooling only) AH = AB + AF
AC = Cooling only (No Reversing Valve) AJ = AC = AD
AD = Cupro Nickle Heat Exchanger AK = AC = AE
AE = Condensate Overflow Switch w/ Alarm output AL = AC = AF
AF = Remote Management Relay Pkg w/ Alarm output
Voltage
4 = 460-3-60
Installation Options
L = Left Hand Return
R = Right Hand Return
Additional Options
8 = 265-1-60
5 = 575-3-60
V = Vertical
H = Horizontal
Airflow

359583-YTG-B-0208
Johnson Controls Unitary Products 3
NOTE:
1. Performance calculated in accordance with ARI/ISO Standard 13256-1 for Water Loop Application.
2. Cooling capacities are rated at entering air conditions of 80.6ºF db / 66.2ºF wb. 86ºF entering water temperature.
3. Heating capacities are rated at entering air conditions of 68ºF db / 59ºF wb, 68ºF entering water temperature.
TABLE 1: GENERAL DATA
Model Series 007 009 012 018 024 030 036 048 060
Nominal Cooling (Ton) 0.5 0.75 1.0 1.5 2.0 2.5 3.0 4.0 5.0
Cooling Performance
Cooling Capacity (BTUH) 7000 9000 12800 18100 24200 30800 36100 48200 59000
EER 12.4 13.0 12.6 14.4 14.4 13.5 14.2 14.0 12.6
Heating Capacity (BTUH) 8800 10700 14800 20900 27500 35200 41400 56000 72000
COP 4.2 4.4 4.2 4.5 4.6 4.4 4.6 4.6 4.4
Design CFM 200 300 400 600 800 1000 1200 1600 2000
Nominal Waterflow (gpm) 1.5 2.25 3.0 4.5 6.0 7.5 9.0 12.0 15.0
Compressor-TypeRotary Rotary Rotary Recip. Recip. Recip. Recip. Recip. Recip.
NumberUsed 111111111
Air Coil- Type Enhanced Copper Tubes, Enhanced Aluminum Fins
Face Area (sq. Ft.) 1.00 1.00 1.00 1.51 2.56 2.56 2.88 4.38 5.00
Rows/FPI 2/14 2/14 3/14 3/14 3/14 3/14 3/14 3/14 3/14
Water Coil - Type Co-Axial
Water Connection Size 1/2” FPT 1/2” FPT 1/2” FPT 3/4” FPT 3/4” FPT 3/4” FPT 3/4” FPT 3/4” FPT 1” FPT
Drain Connection Size 3/4” FPT
Direct Drive Fan-Type Centrifugal, Forward Curved
NumberUsed 111111111
Diameter x Width (in) 9x4 9x4 9x4 9x6 9x7 9x7 9x7 10x9 10x9
Motor HP /Speed 0.10/3 0.10/3 0.17/3 0.25/3 0.25/3 0.33/3 0.50/3 0.75/3 1.0/3
Filters
Horizontal Model - Qty. Size 1-14x16x1 1-14x16x1 1-14x16x1 1-16x20x1 1-18x25x1 1-18x25x1 1-20x25x1 2-20x20x1 1-20x20x1
1-20x25x1
Vertical Models - Qty. Size 1-14x16x1 1-14x16x1 1-14x16x1 1-16x20x1 1-18x25x1 1-18x25x1 1-20x25x1 1-16x25x1
1-14x25x1 1-18x25x1 1-16x25x1
Weight
Operating 130 135 155 180 215 235 260 325 345
Shipping 145 150 170 195 230 255 280 345 365
OPERATING LIMITS - WATER LOOP APPLICATION Cooling Heating
Min. Entering Water 50ºF 40ºF*
Max. Entering Water 110ºF 80ºF
Normal Entering Water 60-90ºF 50-70ºF
*. Heating operation below 55ºF requires insulated water circuit.

359583-YTG-B-0208
4Johnson Controls Unitary Products
NOTE: All capacity data shown is NET - includes motor power/heat at design
CFM and HI fan speed. Tabulated kW values do not include allowance for
external pumping power.
TABLE 2: RP 007 @200 CFM NOMINAL AIRFLOW VERTICAL AND HORIZONTAL MODELS
EWT
(ºF) GPM WPD
(PSI)
Cooling EWT(ºF) GPM Heating
EAT
(db/wb) TC (MBH) SC (MBH) KW THR (MBH) EAT (db) HC (MBH) KW H Absrp. (MBH)
50
75/62 7.1 5.1 0.51 8.8
50
60 7.2 0.59 5.2
1.0 0.8 80/67 7.7 5.0 0.53 9.5 1.0 70 7.2 0.63 5.0
85/72 8.3 4.9 0.55 10.2 80 7.1 0.67 4.8
75/62 7.3 5.2 0.46 8.9 60 7.5 0.60 5.4
1.5 2.0 80/67 8.1 5.2 0.48 9.7 1.5 70 7.4 0.64 5.2
85/72 8.8 5.1 0.50 10.5 80 7.3 0.68 5.0
60
75/62 6.9 5.0 0.56 8.8
60
60 8.1 0.62 5.9
1.0 0.7 80/67 7.5 5.0 0.57 9.4 1.0 70 8.0 0.66 5.7
85/72 8.0 4.8 0.60 10.0 80 7.9 0.70 5.5
75/62 7.1 5.1 0.52 8.9 60 8.4 0.63 6.2
1.5 1.9 80/67 7.9 5.1 0.54 9.7 1.5 70 8.3 0.67 6.0
85/72 8.6 5.0 0.56 10.5 80 8.2 0.71 5.8
70
75/62 6.6 4.9 0.61 8.7
70
60 9.2 0.65 7.0
1.0 0.7 80/67 7.2 4.8 0.63 9.3 1.0 70 9.1 0.69 6.7
85/72 7.7 4.7 0.66 9.9 80 9.0 0.73 6.5
75/62 6.8 5.0 0.57 8.7 60 9.5 0.66 7.3
1.5 1.8 80/67 7.6 5.0 0.59 9.6 1.5 70 9.4 0.70 7.0
85/72 8.3 4.9 0.62 10.4 80 9.3 0.74 6.7
85
75/62 6.2 4.7 0.70 8.6
80
60 10.1 0.68 7.8
1.0 0.7 80/67 6.7 4.7 0.72 9.1 1.0 70 10.0 0.72 7.5
85/72 7.2 4.5 0.75 9.7 80 9.8 0.76 7.2
75/62 6.4 4.8 0.65 8.6 60 10.5 0.69 8.1
1.5 1.7 80/67 7.1 4.8 0.67 9.4 1.5 70 10.3 0.73 7.8
85/72 7.8 4.7 0.70 10.2 80 10.2 0.77 7.5
100
75/62 5.8 4.6 0.77 8.4
1.0 0.6 80/67 6.3 4.5 0.80 9.0
85/72 6.7 4.3 0.84 9.6
75/62 6.0 4.6 0.73 8.5
1.5 1.6 80/67 6.6 4.6 0.76 9.2
85/72 7.2 4.5 0.80 9.9
TC = TOTAL COOLING CAPACITY
SC = SENSIBLE COOLING CAPACITY
THR = TOTAL HEAT REJECTION
HC = TOTAL HEATING CAPACITY
WPD = WATER PRESSURE DROP
AIR FLOW CORRECTION FACTORS
AIRFLOW HEATING COOLING
% OF
Nominal CFM HC Input Power Heat Absrp. TC SC Input Power THR
80 160 0.986 1.058 0.969 0.966 0.893 0.992 0.971
90 180 0.993 1.029 0.985 0.983 0.947 0.996 0.986
100 200 1.000 1.000 1.000 1.000 1.000 1.000 1.000
110 220 1.007 0.977 1.014 1.011 1.049 1.004 1.011
115 230 1.010 0.965 1.021 1.017 1.074 1.006 1.016

359583-YTG-B-0208
Johnson Controls Unitary Products 5
NOTE: All capacity data shown is NET - includes motor power/heat at design
CFM and HI fan speed. Tabulated kW values do not include allowance for
external pumping power.
TABLE 3: RP 009 @ 300 CFM NOMINAL AIRFLOW VERTICAL AND HORIZONTAL MODELS
EWT
(ºF) GPM WPD
(PSI)
Cooling EWT(ºF) GPM Heating
EAT
(db/wb) TC (MBH) SC (MBH) KW THR (MBH) EAT (db) HC (MBH) KW H Absrp. (MBH)
50
75/62 9.1 7.0 0.55 11.0
50
60 8.2 0.62 6.0
1.35 1.4 80/67 10.0 6.9 0.56 11.9 1.35 70 8.1 0.66 5.8
85/72 10.8 6.7 0.57 12.7 80 8.0 0.70 5.6
75/62 9.2 7.0 0.53 11.0 60 8.6 0.64 6.5
2.25 3.5 80/67 10.2 7.0 0.54 12.0 2.25 70 8.5 0.68 6.2
85/72 11.1 6.8 0.56 13.0 80 8.4 0.72 6.0
60
75/62 8.8 6.8 0.61 10.9
60
60 8.8 0.65 6.6
1.35 1.4 80/67 9.7 6.8 0.62 11.8 1.35 70 8.7 0.69 6.3
85/72 10.5 6.6 0.64 12.7 80 8.6 0.73 6.1
75/62 8.9 6.9 0.58 10.9 60 9.7 0.68 7.4
2.25 3.5 80/67 9.9 6.8 0.59 11.9 2.25 70 9.6 0.72 7.1
85/72 10.7 6.7 0.61 12.8 80 9.4 0.76 6.8
70
75/62 8.5 6.7 0.66 10.7
70
60 10.6 0.71 8.1
1.35 1.4 80/67 9.3 6.6 0.67 11.6 1.35 70 10.4 0.76 7.8
85/72 10.1 6.5 0.69 12.4 80 10.3 0.81 7.5
75/62 8.6 6.8 0.64 10.8 60 11.3 0.74 8.7
2.25 3.5 80/67 9.5 6.7 0.65 11.7 2.25 70 11.1 0.79 8.4
85/72 10.4 6.6 0.66 12.6 80 11.0 0.84 8.1
85
75/62 8.0 6.5 0.74 10.5
80
60 11.8 0.76 9.2
1.35 1.4 80/67 8.8 6.4 0.75 11.3 1.35 70 11.6 0.81 8.8
85/72 9.6 6.3 0.78 12.3 80 11.4 0.86 8.5
75/62 8.1 6.5 0.73 10.6 60 12.3 0.78 9.7
2.25 3.5 80/67 9.0 6.5 0.74 11.5 2.25 70 12.1 0.83 9.3
85/72 9.8 6.4 0.77 12.4 80 12.0 0.88 9.0
100
75/62 7.5 6.3 0.82 10.3
1.35 1.4 80/67 8.3 6.2 0.84 11.2
85/72 9.0 6.1 0.87 12.0
75/62 7.6 6.3 0.81 10.4
2.25 3.5 80/67 8.4 6.3 0.83 11.2
85/72 9.1 6.2 0.86 12.0
TC = TOTAL COOLING CAPACITY
SC = SENSIBLE COOLING CAPACITY
THR = TOTAL HEAT REJECTION
HC = TOTAL HEATING CAPACITY
WPD = WATER PRESSURE DROP
AIR FLOW CORRECTION FACTORS
AIRFLOW HEATING COOLING
% OF
Nominal CFM HC Input Power Heat Absrp. TC SC Input Power THR
80 240 0.986 1.058 0.969 0.966 0.893 0.992 0.971
90 270 0.993 1.029 0.985 0.983 0.947 0.996 0.986
100 300 1.000 1.000 1.000 1.000 1.000 1.000 1.000
110 330 1.007 0.977 1.014 1.011 1.049 1.004 1.011
115 345 1.010 0.965 1.021 1.017 1.074 1.006 1.016

359583-YTG-B-0208
6Johnson Controls Unitary Products
NOTE: All capacity data shown is NET - includes motor power/heat at design
CFM and HI fan speed. Tabulated kW values do not include allowance for
external pumping power.
TABLE 4: RP 012 @400 CFM NOMINAL AIRFLOW VERTICAL AND HORIZONTAL MODELS
EWT
(ºF) GPM WPD (PSI)
Cooling EWT(ºF) GPM Heating
EAT
(db/wb) TC (MBH) SC (MBH) KW THR (MBH) EAT (db) HC (MBH) KW H Absrp. (MBH)
50
75/62 13.2 10.0 0.80 15.9
50
60 11.7 0.87 8.7
1.8 2.1 80/67 14.4 9.9 0.83 17.2 1.8 70 11.6 0.93 8.4
85/72 15.4 9.6 0.89 18.4 80 11.4 0.98 8.1
75/62 13.4 10.1 0.76 15.9 60 12.4 0.90 9.4
3.0 5.3 80/67 14.7 10.0 0.78 17.3 3.0 70 12.3 0.96 9.0
85/72 16.0 9.8 0.80 18.7 80 12.1 1.01 8.7
60
75/62 12.7 9.8 0.88 15.7
60
60 13.1 0.92 10.0
1.8 2.0 80/67 13.8 9.7 0.90 16.8 1.8 70 12.9 0.98 9.6
85/72 14.9 9.4 0.96 18.1 80 12.8 1.03 9.3
75/62 13.0 9.9 0.85 15.9 60 13.8 0.94 10.6
3.0 5.1 80/67 13.9 9.8 0.88 16.9 3.0 70 13.6 1.01 10.2
85/72 15.5 9.6 0.92 18.6 80 13.5 1.07 9.8
70
75/62 12.3 9.6 0.96 15.5
70
60 15.2 1.00 11.8
1.8 1.9 80/67 13.4 9.5 1.00 16.8 1.8 70 14.9 1.07 11.3
85/72 14.4 9.3 1.04 17.9 80 14.8 1.13 10.9
75/62 12.5 9.7 0.91 15.6 60 15.9 1.02 12.4
3.0 4.8 80/67 13.7 9.6 0.95 16.9 3.0 70 15.6 1.09 11.9
85/72 14.9 9.4 0.98 18.2 80 15.4 1.15 11.5
85
75/62 11.5 9.3 1.08 15.1
80
60 16.9 1.05 13.3
1.8 1.8 80/67 12.6 9.2 1.11 16.3 1.8 70 16.6 1.13 12.8
85/72 13.6 9.0 1.16 17.5 80 16.4 1.20 12.3
75/62 11.8 9.4 1.03 15.3 60 17.4 1.07 13.7
3.0 4.6 80/67 13.0 9.3 1.06 16.6 3.0 70 17.1 1.15 13.2
85/72 14.1 9.2 1.11 17.8 80 16.9 1.22 12.7
100
75/62 10.8 9.0 1.20 14.8
1.8 1.7 80/67 11.8 8.9 1.25 16.0
85/72 12.7 8.7 1.31 17.1
75/62 11.1 9.1 1.16 15.0
3.0 4.4 80/67 12.1 9.0 1.21 16.2
85/72 13.2 8.8 1.26 17.5
TC = TOTAL COOLING CAPACITY
SC = SENSIBLE COOLING CAPACITY
THR = TOTAL HEAT REJECTION
HC = TOTAL HEATING CAPACITY
WPD = WATER PRESSURE DROP
AIR FLOW CORRECTION FACTORS
AIRFLOW HEATING COOLING
% OF
Nominal CFM HC Input Power Heat Absrp. TC SC Input Power THR
80 320 0.986 1.058 0.969 0.966 0.893 0.992 0.971
90 360 0.993 1.029 0.985 0.983 0.947 0.996 0.986
100 400 1.000 1.000 1.000 1.000 1.000 1.000 1.000
110 440 1.007 0.977 1.014 1.011 1.049 1.004 1.011
115 460 1.010 0.965 1.021 1.017 1.074 1.006 1.016

359583-YTG-B-0208
Johnson Controls Unitary Products 7
NOTE: All capacity data shown is NET - includes motor power/heat at design
CFM and HI fan speed. Tabulated kW values do not include allowance for
external pumping power.
TABLE 5: RP 018 @ 600 CFM NOMINAL AIRFLOW VERTICAL AND HORIZONTAL MODELS
EWT
(ºF) GPM WPD
(PSI)
Cooling EWT(ºF) GPM Heating
EAT
(db/wb) TC (MBH) SC (MBH) KW THR (MBH) EAT (db) HC (MBH) KW H Absrp. (MBH)
50
75/62 18.4 14.6 1.01 21.9
50
60 16.2 1.13 12.4
2.75 2.3 80/67 20.2 14.4 1.04 23.8 2.75 70 16.0 1.20 11.9
85/72 21.8 14.1 1.07 25.5 80 15.8 1.28 11.5
75/62 18.7 14.7 0.96 22.0 60 16.9 1.14 13.0
4.50 5.7 80/67 20.6 14.5 0.98 24.0 4.50 70 16.7 1.22 12.5
85/72 22.3 14.3 1.02 25.8 80 16.5 1.30 12.1
60
75/62 17.8 14.3 1.10 21.6
60
60 18.5 1.20 14.4
2.75 2.2 80/67 19.6 14.2 1.12 23.4 2.75 70 18.2 1.28 13.8
85/72 21.2 13.9 1.16 25.2 80 17.9 1.36 13.3
75/62 18.0 14.4 1.07 21.7 60 19.4 1.23 15.2
4.50 5.5 80/67 20.0 14.3 1.09 23.7 4.50 70 19.1 1.31 14.6
85/72 21.6 14.0 1.12 25.4 80 18.8 1.39 14.1
70
75/62 17.1 14.0 1.21 21.2
70
60 21.1 1.28 16.8
2.75 2.1 80/67 18.9 13.9 1.24 23.2 2.75 70 20.8 1.37 16.1
85/72 20.3 13.6 1.28 24.7 80 20.5 1.46 15.5
75/62 17.4 14.1 1.16 21.4 60 22.2 1.32 17.7
4.50 5.2 80/67 19.2 14.0 1.19 23.3 4.50 70 21.8 1.41 17.0
85/72 20.8 13.8 1.22 25.0 80 21.5 1.50 16.4
85
75/62 16.1 13.6 1.37 20.8
80
60 23.4 1.37 18.7
2.75 2.0 80/67 17.8 13.5 1.40 22.6 2.75 70 23.0 1.46 18.0
85/72 19.2 13.2 1.45 24.2 80 22.7 1.55 17.4
75/62 16.3 13.7 1.33 20.9 60 24.4 1.39 19.7
4.50 4.9 80/67 18.1 13.6 1.35 22.7 4.50 70 24.0 1.49 18.9
85/72 19.6 13.4 1.38 24.3 80 23.6 1.59 18.2
100
75/62 15.1 13.2 1.55 20.4
2.75 1.9 80/67 16.6 13.0 1.58 22.0
85/72 17.9 12.8 1.65 23.5
75/62 15.3 13.3 1.51 20.5
4.50 4.7 80/67 17.0 13.2 1.54 22.3
85/72 18.4 12.9 1.59 23.8
TC = TOTAL COOLING CAPACITY
SC = SENSIBLE COOLING CAPACITY
THR = TOTAL HEAT REJECTION
HC = TOTAL HEATING CAPACITY
WPD = WATER PRESSURE DROP
AIR FLOW CORRECTION FACTORS
AIRFLOW HEATING COOLING
% OF
Nominal CFM HC Input Power Heat Absrp. TC SC Input Power THR
80 480 0.986 1.058 0.969 0.966 0.893 0.992 0.971
90 540 0.993 1.029 0.985 0.983 0.947 0.996 0.986
100 600 1.000 1.000 1.000 1.000 1.000 1.000 1.000
110 660 1.007 0.977 1.014 1.011 1.049 1.004 1.011
115 690 1.010 0.965 1.021 1.017 1.074 1.006 1.016

359583-YTG-B-0208
8Johnson Controls Unitary Products
NOTE: All capacity data shown is NET - includes motor power/heat at design
CFM and HI fan speed. Tabulated kW values do not include allowance for
external pumping power.
TABLE 6: RP 0024 @ 800 CFM NOMINAL AIRFLOW VERTICAL AND HORIZONTAL MODELS
EWT
(ºF) GPM WPD
(PSI)
Cooling EWT(ºF) GPM Heating
EAT
(db/wb) TC (MBH) SC (MBH) KW THR (MBH) EAT (db) HC (MBH) KW H Absrp. (MBH)
50
75/62 25.5 19.9 1.25 29.8
50
60 21.0 1.43 16.1
3.5 3.3 80/67 28.3 19.8 1.26 32.6 3.5 70 20.7 1.53 15.5
85/72 30.9 19.5 1.27 35.2 80 20.5 1.62 14.9
75/62 26.1 20.2 1.15 30.0 60 21.8 1.46 16.9
6.0 8.0 80/67 29.0 20.1 1.17 33.0 6.0 70 21.5 1.56 16.2
85/72 31.8 19.9 1.19 35.9 80 21.3 1.65 15.6
60
75/62 24.3 19.4 1.41 29.1
60
60 23.8 1.50 18.6
3.5 3.2 80/67 26.9 19.3 1.43 31.8 3.5 70 23.4 1.61 17.9
85/72 29.4 19.0 1.45 34.4 80 23.1 1.71 17.3
75/62 25.0 19.7 1.33 29.6 60 25.1 1.54 19.9
6.0 7.7 80/67 27.8 19.6 1.35 32.4 6.0 70 24.7 1.65 19.1
85/72 30.2 19.3 1.37 34.9 80 24.4 1.75 18.4
70
75/62 23.1 18.9 1.55 28.4
70
60 27.8 1.61 22.3
3.5 3.0 80/67 25.6 18.8 1.58 31.0 3.5 70 27.3 1.73 21.4
85/72 27.8 18.5 1.62 33.3 80 26.9 1.84 20.6
75/62 23.8 19.2 1.48 28.9 60 29.5 1.66 23.8
6.0 7.3 80/67 26.5 19.1 1.51 31.7 6.0 70 29.0 1.78 22.9
85/72 28.8 18.8 1.54 34.1 80 28.5 1.89 22.1
85
75/62 21.1 18.1 1.75 27.1
80
60 30.7 1.69 25.0
3.5 2.9 80/67 23.4 18.0 1.79 29.5 3.5 70 30.2 1.81 24.0
85/72 25.4 17.7 1.85 31.7 80 29.7 1.92 23.1
75/62 21.5 18.2 1.70 27.3 60 34.0 1.61 28.5
6.0 6.9 80/67 24.3 18.3 1.75 30.3 6.0 70 33.3 1.73 27.4
85/72 26.4 18.0 1.79 32.5 80 32.7 1.84 26.4
100
75/62 19.0 17.2 1.95 25.7
3.5 2.7 80/67 21.1 17.1 2.00 27.9
85/72 22.7 16.8 2.06 29.7
75/62 19.3 17.3 1.91 25.8
6.0 6.6 80/67 21.7 17.3 1.97 28.4
85/72 23.6 17.1 2.03 30.5
TC = TOTAL COOLING CAPACITY
SC = SENSIBLE COOLING CAPACITY
THR = TOTAL HEAT REJECTION
HC = TOTAL HEATING CAPACITY
WPD = WATER PRESSURE DROP
AIR FLOW CORRECTION FACTORS
AIRFLOW HEATING COOLING
% OF
Nominal CFM HC Input Power Heat Absrp. TC SC Input Power THR
80 640 0.986 1.058 0.969 0.966 0.893 0.992 0.971
90 720 0.993 1.029 0.985 0.983 0.947 0.996 0.986
100 800 1.000 1.000 1.000 1.000 1.000 1.000 1.000
110 880 1.007 0.977 1.014 1.011 1.049 1.004 1.011
115 920 1.010 0.965 1.021 1.017 1.074 1.006 1.016

359583-YTG-B-0208
Johnson Controls Unitary Products 9
NOTE: All capacity data shown is NET - includes motor power/heat at design
CFM and HI fan speed. Tabulated kW values do not include allowance for
external pumping power.
TABLE 7: RP 030 @ 1000 CFM NOMINAL AIRFLOW VERTICAL AND HORIZONTAL MODELS
EWT
(ºF) GPM WPD
(PSI)
Cooling EWT(ºF) GPM Heating
EAT
(db/wb) TC (MBH) SC (MBH) KW THR (MBH) EAT (db) HC (MBH) KW H Absrp. (MBH)
50
75/62 32.8 25.0 1.71 38.6
50
60 27.0 1.91 20.5
4.5 3.6 80/67 36.2 24.8 1.74 42.1 4.5 70 26.6 2.04 19.7
85/72 39.5 24.4 1.77 45.5 80 26.4 2.16 19.0
75/62 33.7 25.4 1.60 39.1 60 28.2 1.95 21.5
7.5 9.0 80/67 37.1 25.2 1.62 42.6 7.5 70 27.8 2.09 20.7
85/72 40.5 24.8 1.64 46.1 80 27.5 2.22 20.0
60
75/62 31.2 24.3 1.92 37.7
60
60 30.9 2.04 23.9
4.5 3.5 80/67 34.5 24.2 1.94 41.1 4.5 70 30.4 2.18 23.0
85/72 37.5 23.8 1.98 44.2 80 30.1 2.31 22.2
75/62 32.0 24.7 1.82 38.2 60 32.7 2.09 25.6
7.5 8.7 80/67 35.5 24.6 1.84 41.8 7.5 70 32.2 2.24 24.6
85/72 38.7 24.2 1.86 45.0 80 31.8 2.38 23.7
70
75/62 29.5 23.6 2.09 36.6
70
60 35.7 2.18 28.2
4.5 3.3 80/67 32.7 23.5 2.12 39.9 4.5 70 35.1 2.34 27.1
85/72 35.7 23.2 2.17 43.1 80 34.6 2.49 26.1
75/62 30.5 24.0 1.99 37.3 60 37.9 2.19 30.4
7.5 8.2 80/67 33.9 23.9 2.02 40.8 7.5 70 37.2 2.35 29.2
85/72 37.0 23.6 2.05 44.0 80 36.7 2.50 28.1
85
75/62 27.0 22.6 2.31 34.9
80
60 40.2 2.31 32.3
4.5 3.1 80/67 30.0 22.5 2.37 38.1 4.5 70 39.4 2.48 31.0
85/72 32.7 22.1 2.45 41.0 80 38.9 2.64 29.9
75/62 27.8 22.9 2.24 35.4 60 42.2 2.38 34.0
7.5 7.8 80/67 31.0 22.9 2.27 38.7 7.5 70 41.4 2.55 32.7
85/72 33.9 22.5 2.33 41.8 80 40.8 2.71 31.5
100
75/62 24.5 21.5 2.50 33.0
4.5 3.0 80/67 27.2 21.4 2.58 36.0
85/72 29.6 21.1 2.70 38.8
75/62 25.1 21.8 2.46 33.5
7.5 7.5 80/67 28.2 21.8 2.51 36.7
85/72 30.8 21.5 2.60 39.6
TC = TOTAL COOLING CAPACITY
SC = SENSIBLE COOLING CAPACITY
THR = TOTAL HEAT REJECTION
HC = TOTAL HEATING CAPACITY
WPD = WATER PRESSURE DROP
AIR FLOW CORRECTION FACTORS
AIRFLOW HEATING COOLING
% OF
Nominal CFM HC Input Power Heat Absrp. TC SC Input Power THR
80 800 0.986 1.058 0.969 0.966 0.893 0.992 0.971
90 900 0.993 1.029 0.985 0.983 0.947 0.996 0.986
100 1000 1.000 1.000 1.000 1.000 1.000 1.000 1.000
110 1100 1.007 0.977 1.014 1.011 1.049 1.004 1.011
115 1150 1.010 0.965 1.021 1.017 1.074 1.006 1.016

359583-YTG-B-0208
10 Johnson Controls Unitary Products
NOTE: All capacity data shown is NET - includes motor power/heat at design
CFM and HI fan speed. Tabulated kW values do not include allowance for
external pumping power.
TABLE 8: RP 036 @ 1200 CFM NOMINAL AIRFLOW VERTICAL AND HORIZONTAL MODELS
EWT
(ºF) GPM WPD
(PSI)
Cooling EWT
(ºF) GPM Heating
EAT
(db/wb) TC (MBH) SC (MBH) KW THR (MBH) EAT (db) HC (MBH) KW H Absrp. (MBH)
50
75/62 38.8 29.9 1.78 44.8
50
60 31.4 2.20 23.9
5.5 2.9 80/67 42.9 29.7 1.85 49.1 5.5 70 31.0 2.35 23.0
85/72 47.1 29.4 1.91 53.6 80 30.7 2.49 22.2
75/62 39.2 30.1 1.65 44.8 60 32.8 2.24 25.2
9.0 7.0 80/67 43.9 30.1 1.68 49.6 9.0 70 32.3 2.39 24.2
85/72 48.2 29.8 1.76 54.1 80 32.0 2.53 23.3
60
75/62 36.7 29.0 2.15 44.0
60
60 36.0 2.33 28.0
5.5 2.8 80/67 40.6 28.9 2.21 48.1 5.5 70 35.4 2.49 26.9
85/72 44.5 28.5 2.29 52.3 80 34.9 2.64 25.9
75/62 37.1 29.2 2.03 44.0 60 38.1 2.39 30.0
9.0 6.8 80/67 41.5 29.2 2.09 48.6 9.0 70 37.5 2.56 28.8
85/72 45.6 28.9 2.14 52.8 80 37.0 2.72 27.8
70
75/62 35.1 28.4 2.30 42.9
70
60 41.9 2.50 33.3
5.5 2.6 80/67 38.4 28.0 2.38 46.5 5.5 70 41.1 2.68 32.0
85/72 42.2 27.7 2.43 50.4 80 40.6 2.85 30.8
75/62 35.5 28.4 2.19 42.9 60 44.4 2.58 35.6
9.0 6.4 80/67 39.6 28.5 2.25 47.2 9.0 70 43.6 2.76 34.2
85/72 43.4 28.1 2.32 51.3 80 43.0 2.93 33.0
85
75/62 32.6 27.3 2.56 41.3
80
60 46.7 2.65 37.7
5.5 2.5 80/67 35.6 27.0 2.63 44.5 5.5 70 45.9 2.84 36.2
85/72 38.6 26.5 2.81 48.1 80 45.2 3.02 34.9
75/62 33.0 27.3 2.48 41.4 60 49.3 2.74 40.0
9.0 6.1 80/67 36.1 27.1 2.59 44.9 9.0 70 48.4 2.93 38.4
85/72 40.0 27.0 2.67 49.1 80 47.6 3.11 37.0
100
75/62 28.9 25.8 2.92 38.8
5.5 2.4 80/67 31.4 25.4 3.04 41.7
85/72 35.2 25.4 3.12 45.8
75/62 29.3 25.8 2.85 39.0
9.0 5.8 80/67 32.5 25.8 2.96 42.5
85/72 36.4 25.8 3.03 46.7
TC = TOTAL COOLING CAPACITY
SC = SENSIBLE COOLING CAPACITY
THR = TOTAL HEAT REJECTION
HC = TOTAL HEATING CAPACITY
WPD = WATER PRESSURE DROP
AIR FLOW CORRECTION FACTORS
AIRFLOW HEATING COOLING
% OF
Nominal CFM HC Input Power Heat Absrp. TC SC Input Power THR
80 960 0.986 1.058 0.969 0.966 0.893 0.992 0.971
90 1080 0.993 1.029 0.985 0.983 0.947 0.996 0.986
100 1200 1.000 1.000 1.000 1.000 1.000 1.000 1.000
110 1320 1.007 0.977 1.014 1.011 1.049 1.004 1.011
115 1380 1.010 0.965 1.021 1.017 1.074 1.006 1.016

359583-YTG-B-0208
Johnson Controls Unitary Products 11
NOTE: All capacity data shown is NET - includes motor power/heat at design
CFM and HI fan speed. Tabulated kW values do not include allowance for
external pumping power.
TABLE 9: RP 048 @ 1600 CFM NOMINAL AIRFLOW VERTICAL AND HORIZONTAL MODELS
EWT
(ºF) GPM WPD
(PSI)
Cooling EWT(ºF) GPM Heating
EAT
(db/wb) TC (MBH) SC (MBH) KW THR (MBH) EAT (db) HC (MBH) KW H Absrp. (MBH)
50
75/62 51.2 39.6 2.80 60.7
50
60 44.3 3.11 33.7
7.5 3.9 80/67 56.9 39.5 2.88 66.7 7.5 70 43.7 3.31 32.4
85/72 59.9 38.1 3.04 70.2 80 43.2 3.50 31.2
75/62 52.2 40.1 2.70 61.4 60 45.3 3.13 34.6
12.0 9.6 80/67 58.0 40.0 2.77 67.4 12.0 70 44.6 3.34 33.2
85/72 62.1 38.9 2.84 71.7 80 44.1 3.54 32.0
60
75/62 48.4 38.5 3.08 58.9
60
60 49.7 3.25 38.6
7.5 3.7 80/67 53.7 38.3 3.17 64.5 7.5 70 48.9 3.47 37.1
85/72 56.7 37.1 3.34 68.1 80 48.3 3.68 35.8
75/62 49.8 39.1 2.94 59.8 60 52.5 3.33 41.1
12.0 9.2 80/67 55.4 38.9 3.03 65.7 12.0 70 51.6 3.55 39.5
85/72 59.3 37.9 3.01 69.8 80 50.9 3.76 38.1
70
75/62 46.2 37.5 3.31 57.4
70
60 57.4 3.46 45.6
7.5 3.5 80/67 51.3 37.4 3.42 62.9 7.5 70 56.4 3.69 43.8
85/72 54.2 36.2 3.59 66.4 80 55.6 3.91 42.2
75/62 47.3 38.0 3.19 58.1 60 59.9 3.52 47.9
12.0 8.7 80/67 52.8 37.9 3.27 63.9 12.0 70 58.8 3.76 46.0
85/72 56.1 36.8 3.40 67.7 80 58.0 3.99 44.3
60
75/62 42.9 36.2 3.64 55.3
80
60 62.8 3.59 50.6
7.5 3.3 80/67 47.2 35.8 3.87 60.4 7.5 70 61.7 3.83 48.6
85/72 49.3 34.6 4.27 63.8 80 60.7 4.06 46.9
75/62 43.5 36.4 3.58 55.7 60 66.1 3.67 53.6
12.0 8.3 80/67 48.6 36.4 3.62 60.9 12.0 70 64.9 3.92 51.5
85/72 51.6 35.3 3.84 64.7 80 63.8 4.16 49.6
100
75/62 38.7 34.4 4.03 52.4
7.5 3.2 80/67 43.2 34.4 4.01 57.1
85/72 45.1 33.2 4.45 60.2
75/62 39.3 34.7 3.98 52.8
12.0 7.9 80/67 44.1 34.7 4.02 57.8
85/72 47.0 33.8 4.27 61.5
TC = TOTAL COOLING CAPACITY
SC = SENSIBLE COOLING CAPACITY
THR = TOTAL HEAT REJECTION
HC = TOTAL HEATING CAPACITY
WPD = WATER PRESSURE DROP
AIR FLOW CORRECTION FACTORS
AIRFLOW HEATING COOLING
% OF
Nominal CFM HC Input Power Heat Absrp. TC SC Input Power THR
80 1280 0.986 1.058 0.969 0.966 0.893 0.992 0.971
90 1440 0.993 1.029 0.985 0.983 0.947 0.996 0.986
100 1600 1.000 1.000 1.000 1.000 1.000 1.000 1.000
110 1760 1.007 0.977 1.014 1.011 1.049 1.004 1.011
115 1840 1.010 0.965 1.021 1.017 1.074 1.006 1.016

359583-YTG-B-0208
12 Johnson Controls Unitary Products
NOTE: All capacity data shown is NET - includes motor power/heat at design
CFM and HI fan speed. Tabulated kW values do not include allowance for
external pumping power.
TABLE 10: RP 060 @ 2000 CFM NOMINAL AIRFLOW VERTICAL AND HORIZONTAL MODELS
EWT
(ºF) GPM WPD
(PSI)
Cooling EWT(ºF) GPM Heating
EAT
(db/wb) TC (MBH) SC (MBH) KW THR (MBH) EAT (db) HC (MBH) KW H Absrp. (MBH)
50
75/62 61.7 48.4 3.82 74.7
50
60 52.0 3.88 38.7
9.0 3.6 80/67 68.1 48.1 3.91 81.4 9.0 70 51.3 4.13 37.2
85/72 75.0 47.6 4.03 88.7 80 50.8 4.38 35.9
75/62 63.0 49.0 3.66 75.5 60 56.9 4.05 43.1
15.0 8.8 80/67 69.5 48.6 3.74 82.2 15.0 70 56.1 4.32 41.4
85/72 76.5 48.1 3.85 89.6 80 55.6 4.59 39.9
60
75/62 59.4 47.5 4.08 73.3
60
60 59.0 4.12 45.0
9.0 3.5 80/67 65.7 47.2 4.17 79.9 9.0 70 58.2 4.39 43.2
85/72 72.0 46.6 4.34 86.8 80 57.6 4.66 41.6
75/62 60.7 48.0 3.94 74.1 60 66.1 4.36 51.2
15.0 8.5 80/67 67.1 47.7 4.02 80.8 15.0 70 65.1 4.65 49.2
85/72 73.5 47.1 4.18 87.7 80 64.3 4.94 47.4
70
75/62 56.4 46.2 4.39 71.4
70
60 77.0 4.45 61.8
9.0 3.3 80/67 62.8 46.1 4.47 78.0 9.0 70 75.6 4.75 59.4
85/72 69.3 45.6 4.60 85.0 80 74.5 5.05 57.3
75/62 58.1 46.9 4.22 72.5 60 76.1 4.70 60.1
15.0 8 80/67 64.3 46.6 4.32 79.0 15.0 70 74.8 5.02 57.7
85/72 71.2 46.3 4.40 86.2 80 73.8 5.34 55.6
85
75/62 52.4 44.6 4.87 69.0
80
60 77.8 4.76 61.5
9.0 3.1 80/67 57.7 44.1 4.95 74.6 9.0 70 76.4 5.08 59.1
85/72 63.5 43.7 5.12 80.9 80 75.4 5.40 57.0
75/62 53.8 45.1 4.66 69.7 60 87.0 5.09 69.6
15.0 7.6 80/67 58.9 44.6 4.84 75.4 15.0 70 85.5 5.44 66.9
85/72 65.5 44.3 5.22 83.3 80 84.3 5.79 64.5
100
75/62 47.7 42.6 5.21 65.5
9.0 3.0 80/67 52.4 42.2 5.42 70.9
85/72 58.5 42.1 5.57 77.5
75/62 49.1 43.2 5.09 66.4
15.0 7.3 80/67 54.6 43.0 5.23 72.4
85/72 60.4 42.7 5.38 78.7
TC = TOTAL COOLING CAPACITY
SC = SENSIBLE COOLING CAPACITY
THR = TOTAL HEAT REJECTION
HC = TOTAL HEATING CAPACITY
WPD = WATER PRESSURE DROP
AIR FLOW CORRECTION FACTORS
AIRFLOW HEATING COOLING
% OF
Nominal CFM HC Input Power Heat Absrp. TC SC Input Power THR
80 1600 0.986 1.058 0.969 0.966 0.893 0.992 0.971
90 1800 0.993 1.029 0.985 0.983 0.947 0.996 0.986
100 2000 1.000 1.000 1.000 1.000 1.000 1.000 1.000
110 2200 1.007 0.977 1.014 1.011 1.049 1.004 1.011
115 2300 1.010 0.965 1.021 1.017 1.074 1.006 1.016

359583-YTG-B-0208
Johnson Controls Unitary Products 13
Units are shipped pre-wired for Medium speed.
All airflow ratings are at lowest voltage rating of dual rating (i.e.208 volt).
Airflow ratings include resistance of wet coil and clean air filters.
TABLE 11: BLOWER PERFORMANCE EXTERNAL STATIC PRESSURE (IN W.G.)
Unit Speed 00.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
007 High----270235195150- Med - - 260 240 210 175 - - -
Low225215200180150----
009 High - - 380 360 330 290 240 - - Med 350 340 325 300 270 235 - - -
Low285275260240210----
012 High 495 475 450 420 385 345 300 - - Med 470 455 430 400 365 325 - - -
Low385370355330300----
018 High - - 705 660 610 555 495 430 - Med - 700 660 615 565 510 450 - -
Low 690 665 630 585 535 480 - - -
024 High - - 1005 950 890 820 740 650 - Med 925 905 875 840 790 730 660 - -
Low - - 780 765 725 660 590 - -
030 High - - 1170 1120 1060 985 905 810 - Med 1150 1125 1090 1045 990 925 850 765 -
Low - 975 970 940 905 855 785 - -
036 High - 1390 1330 1270 1210 1140 1055 960 - Med 1355 1320 1270 1215 1155 1085 1005 920 -
Low 1200 1190 1170 1130 1085 1020 950 - -
048 High - - 1990 1915 1835 1750 1660 1550 1415 Med 1880 1860 1820 1770 1710 1640 1550 1450 1320
Low - 1490 1485 1480 1460 1420 1360 1285 1160
060 High 2340 2280 2210 2140 2070 1990 1895 1790 1660 Med 2040 2030 2005 1970 1925 1860 1785 1700 1590
Low - - 1705 1700 1680 1660 1610 1540 -
TABLE 12: ELECTRICAL DATA
MODEL SUPPLY COMPRESSOR BLOWER MIN. CCT. MAX FUSE/
Series VOLTAGE QTY RLA LRA HP FLA AMPACITY CCT. BKR. AMP
007 208-230/1/60 1 @ 2.8 17.7 0.10 0.9 4.35 15
009 208-230/1/60 1 @ 3.4 23.0 0.10 0.9 5.15 15
012 208-230/1/60 1 @ 4.8 26.3 0.17 1.4 7.40 15
018 208-230/1/60 1 @ 9.6 49.0 0.17 1.4 13.40 20
024 208-230/1/60 1 @ 10.4 49.0 0.25 1.5 14.50 20
030 208-230/1/60 1 @ 12.4 61.0 0.33 2.6 18.10 30
208-230/3/60 1 @ 7.7 55.0 0.33 2.6 12.23 15
036 208-230/1/60 1 @ 15.3 82.0 0.50 3.2 22.33 35 208-230/3/60 1 @ 10.0 68.0 0.50 3.2 15.70 25
460/3/60 1 @ 4.8 34.0 0.50 2.5 8.50 15
048
208-230/1/60 1 @ 19.0 105.0 0.75 4.9 28.65 45
208-230/3/60 1 @ 14.0 91.0 0.75 4.9 22.40 35
460/3/60 1 @ 5.9 42.0 0.75 2.2 9.58 15
575/3/60 1 @ 4.8 34.0 0.75 1.8 7.80 15
060
208-230/1/60 1 @ 24.6 132.0 1.00 5.1 35.85 60
208-230/3/60 1 @ 16.0 97.0 1.00 5.1 25.10 40
460/3/60 1 @ 8.2 50.0 1.00 3.2 13.45 20
575/3/60 1 @ 5.0 44.0 1.00 2.6 8.85 15

359583-YTG-B-0208
14 Johnson Controls Unitary Products
FIGURE 1 - HORIZONTAL DIMENSIONAL DATA
1 - Electrical Box Service Door
2 - Compressor and Condenser
Service Door
3 - Blower Service Door
SERVICE DOORS
MODEL
RETURN AIR
DIMENSIONS IN INCHES

359583-YTG-B-0208
Johnson Controls Unitary Products 15
FIGURE 2 - VERTICAL DIMENSIONAL DATA
SERVICE DOORS
1 - ELECTRICAL BOX SERVICE DOOR
2 - COMPRESSOR AND CONDENSER
SERVICE DOOR
3 - BLOWER SERVICE DOOR

Subject to change without notice. Printed in U.S.A. 359583-YTG-B-0208
Copyright © 2008 by Johnson Controls, Inc. All rights reserved. Supersedes: 359583/036-21486-001-A-1102
Johnson Controls Unitary Products
5005 York Drive
Norman, OK 73069