York AY012MA321 Quick start guide

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
SPLIT-SYSTEM
A
IR CONDITIONERS
13 SEER
A
Y012MA321 THRU 036
(1 THRU 3 NOMINAL TONS, 1 PH)
Due to continuous product improvement, specifications
are subject to change without notice.
V
isit us on the web at www.york.com for the most
up-to-date technical information.
A
dditional rating information can be found at
w
ww.ari.org/aridirectory.
LISTED
CERTIFICATION APPLIES ONLY
WHEN THE COMPLETE
SYSTEM IS LISTED
WITH ARI.
ISO 9001
Certified Quality
Management System
R
N
E
M
P
I
U
Q
E
T
Y
R
A
T
I
N
U
0
1
2
ARI
R
A
D
N
A
T
S
D
I
S
N
O
T
C
E
S
F
O
C
C
I
F
I
T
R
E
N
O
I
T
A
H
T
I
W
C
G
N
I
Y
L
P
M
O
S
A
I
R
A
O
T
D
E
I
F
I
T
R
E
C
R
E
R
U
T
C
A
F
U
N
A
M
C
-
G
N
I
N
O
I
T
I
D
N
O
R
I
A
246814-YTG-D-0606
DESCRIPTION
The 13 SEER Series condensing unit is the outdoor part of a versa-
tile system of air conditioning. It is designed to be custom- matched
with one of UPG’s complete line of evaporator sections, each
designed to serve a specific function.
WARRANTY
5-year limited parts warranty.
5-year limited compressor warranty.
FEATURES
•QUALITY CONDENSER COILS - The coil is constructed of
aluminum microchannel tubing and enhanced aluminum fins for
increased efficiency and corrosion protection.
•COIL PROTECTION - Coils are protected from damage by a
polymer mesh applied between the coil face, and a coated steel coil
guard.
•PROTECTED COMPRESSOR - Compressors are internally
protected against high pressure and temperature. This is accom-
plished by the simultaneous operation of high pressure relief valve
and a temperature sensor which protects the compressor if undesir-
able operating conditions occur. A liquid line filter-drier further pro-
tects the compressor.
•DURABLE FINISH - The cabinet is made of pre-painted steel.
The pre-treated flat galvanized steel provides a better paint-to-steel
bond, which resists corrosion and rust creep. Special primer formulas
and matted champagne finish insure less fading when exposed to
sunlight.
•LOWER INSTALLED COST - Installation time and costs are
reduced by easy power and control wiring connections. The small
base dimension means less space is required on the ground or roof.
•TOP DISCHARGE - The warm air from the top mounted fan is
blown away from the structure and any landscaping. This allows
compact location on multi-unit applications.
•LOW OPERATING SOUND LEVEL - The upward air flow car-
ries the normal operating noise away from the living area. The rigid
top panel effectively isolates any motor sound. Isolator mounted
compressor and the condenser coil muffle the normal fan motor and
compressor operating sounds.
•LOW MAINTENANCE - Long life permanently lubricated motor-
bearings need no annual servicing.
•EASY SERVICE ACCESS - Fully exposed refrigerant connec-
tions and a single panel covering the electrical controls make for
easy servicing of the unit.
•SECURED SERVICE VALVES - Secured re-usable service
valves are provided on both the liquid and vapor sweat connections
for ease of evacuating and charging.
•U.L. AND C.U.L. LISTED - Approved for outdoor application.
Certified in accordance with the Unitary Small Equipment certification
program, which is based on ARI Standard 210/240.

246814-YTG-D-0606
2Unitary Products Group
1. Dual element fuses or HACR circuit breaker.
2. The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or
subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.
All dimensions are in inches. They are subject to change without
notice. certified dimensions will be provided upon request.
1. Including Fan Guard
PHYSICAL AND ELECTRICAL DATA
MODEL AY012MA321 AY018MA321 AY024MA321 AY030MA321 AY036MA321
Unit Supply Voltage 208 - 230V, 1 Phase, 60Hz
Minimum Circuit Ampacity 8.9 9.5 12.0 14.5 18.2
Maximum Overprotection Device115 15 20 25 30
Rated Load Amps 6.7 7.2 8.9 11 13.5
Compressor
Model 2K20S236T6A 2K22S236SUB 2J29S236A1A 2J35S236B1A H21J30BABCA
Brand Panasonic Panasonic Panasonic Panasonic Bristol
Type Rotary Rotary Rotary Rotary Recip
LRA 33.0 40.0 60.0 68.0 78.0
Start Kit Yes Yes Yes Yes No
CCH NoNoNoNoNo
Dimensions
Length (in) 21-3/4 21-3/4 21-3/4 21-3/4 21-3/4
Width (in) 21-3/4 21-3/4 21-3/4 21-3/4 21-3/4
Height (in) 22-1/2 22-1/2 24-1/4 26-3/4 30-3/4
Weight (lbs) 85 90 105 110 140
Fan & Motor
HP 1/12 1/12 1/8 1/8 1/4
RPM 1100 1100 1075 1075 1100
FLA 0.50.50.80.81.4
CFM 1450 1450 1700 1800 2150
Dia (in) 17-1/2 17-1/2 17-1/2 17-1/2 17-1/2
OD Coil Area (ft^2) 7.26 7.26 7.89 8.77 10.17 Rows 11111
Fins / Inch 23 23 23 23 23
Connection OD Liquid (in) 3/8 3/8 3/8 3/8 3/8
Suction (in) 3/4 3/4 3/4 3/4 3/4
Line Set OD Liquid (in) 3/8 3/8 3/8 3/8 3/8
Suction (in) 5/8 5/8 5/8 3/4 3/4
Refrigerant R-22 R-22 R-22 R-22 R-22
Unit Charge (lbs - oz) 22 - 14 2 - 14 3 - 6 3 - 14 3 - 8
Charge Per Foot - oz 0.66 0.66 0.66 0.68 0.68
A
C
B
Unit
Model Weight (Lbs.) Dimensions (Inches) Refrigerant
Connection
Service Valve Size
A1B C Liquid Vapor
012 85 22-1/2 21-3/4 21-3/4
3/8” 3/4”
018 90 22-1/2 21-3/4 21-3/4
024 105 24-1/4 21-3/4 21-3/4
030 110 26-3/4 21-3/4 21-3/4
036 140 30-3/4 21-3/4 21-3/4

246814-YTG-D-0606
Unitary Products Group 3
Additional R-22 Charge / TXV for Various Matched Systems
Outdoor Unit AY012MA321 AY018MA321 AY024MA321 AY030MA321 AY036MA321
Required TXV 1TVM2A1 1TVM2A1 1TVM2A1 1TVM2A1 1TVM2A1
Factory R-22 Charge, lbs-oz 2 - 14 2 - 14 3 - 6 3 - 14 3 - 8
Indoor Coil1 Coil Orifice2 TXV Kit3 - Additional Charge, Oz
FC/MC/PC18A2A — 0 0 — — —
FC/MC/PC18B2A — 0 0 — — —
FC/MC/PC24A2A — — — 0 — —
FC/MC/PC24B2A — — — 0 — —
FC/MC/PC30A2A — — — 0 — —
FC/MC/PC30B2A — — — 0 — —
FC/MC/PC36A2A — — — 0 0 —
FC/MC/PC36B2A — — — 0 0 —
FC/MC/PC36C2A — — — 0 0 —
HC24A2A — 0 0 — — —
HC30A2A — — — 0 0 —
UC18A2A — 0 0 — — —
UC18B2A — 0 0 — — —
UC24A2A — — — 0 — —
UC24B2A — — — 0 — —
UC30A2A — — — 0 — —
UC30B2A — — — 0 — —
UC36A2A — — — 0 0 —
UC36B2A — — — 0 0 —
UC36C2A ———0 0—
AHP18B2A — 0 0 — — —
AHP24B2A — — 0 0 — —
AHP36C2A — — — — 0 —
FC/MC/PC18A3X — 2A + 0 2A + 0 — — —
FC/MC/PC18B3X — 2A + 0 2A + 0 — — —
FC/MC/PC24A3X — — — 2A + 0 — —
FC/MC/PC24B3X — — — 2A + 0 — —
FC/MC/PC30A3X — — — 2A + 0 — —
FC/MC/PC30B3X — — — 2A + 0 — —
FC/MC/PC36A3X — — — 2A + 0 2A + 0 —
FC/MC/PC36B3X — — — 2A + 0 2A + 0 —
FC/MC/PC36C3X — — — 2A + 0 2A + 0 —
FC/MC/PC42B3X — — — — 2A + 0 2A + 9
FC/MC/PC42C3X — — — — 2A + 0 2A + 9
FC/MC/PC48C3X— ————2A+9
FC/MC/PC48D3X— ————2A+9
HC24A3X — 2A + 0 2A + 0 — — —
HC30A3X — — — 2A + 0 2A + 0 —
HC48C3X — ————2A+9
UC18A3X — 2A + 0 2A + 0 — — —
UC18B3X — 2A + 0 2A + 0 — — —
UC24A3X — — — 2A + 0 — —
UC24B3X — — — 2A + 0 — —
UC30A3X — — — 2A + 0 — —
UC30B3X — — — 2A + 0 — —
UC36A3X — — — 2A + 0 2A + 0 —
UC36B3X — — — 2A + 0 2A + 0 —
UC36C3X — — — 2A + 0 2A + 0 —
UC42B3X — — — — 2A + 0 2A + 9
UC42C3X — — — — 2A + 0 2A + 9
UC48C3X — ————2A+9
UC48D3X — ————2A+9

246814-YTG-D-0606
4Unitary Products Group
FOOTNOTES:
* This system does not achieve 13 SEER
1. Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit #6918A5011
2. These orifices are factory mounted in the flow device of each indoor coil
3. A TXV kit must be used with these coils to obtain system performance (2A, 2B, and 2C indicate 1TVM series)
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and for 15 feet of interconnecting line
tubing.
2. Verify the TXV and additional charge required for specific evaporator coil in the system using the above table.
3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in the table above.
4. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evaporator + adder
for line set.
Additional R-22 Charge / TXV for Various Matched Systems (continued)
Outdoor Unit AY012MA321 AY018MA321 AY024MA321 AY030MA321 AY036MA321
Required TXV 1TVM2A1 1TVM2A1 1TVM2A1 1TVM2A1 1TVM2A1
Factory R-22 Charge, lbs-oz 2 - 14 2 - 14 3 - 6 3 - 14 3 - 8
Indoor Coil1 Coil Orifice2 TXV Kit3 - Additional Charge, Oz
AHP18B3X — 2A + 0 2A + 0 — — —
AHP24B3X — — 2A + 0 2A + 0 — —
AHP36C3X — — — — 2A + 0 —
AHP42C3X — ————2A+9
G2FD024(S,H)14,17 61 2A + 0 2A + 0 — — —
G2FD030(S,H)17 65 2A + 0 2A + 0 2A + 0 — —
G2FD035(S,H)14 65 2A + 0 2A + 0 2A + 0 — —
G2FD036(S,H)17 75 — — 2A + 0 2A + 0 —
G2FD036(S,H)21 75 — — — 2A + 0 —
G2FD042(S,H)21 78 — — — 2A + 0 2A + 9
G2FD046(S,H)17 78 — — — 2A + 0 2A + 9
G2FD048(S,H)21,24 84 ————2A+9
G4FD024H14T2A — 0 0 — — —
G4FD024H17T2A — 0 0 — — —
G4FD030H17T2A — 0 0 0 — —
G4FD035H14T2A — 0 0 0 — —
G4FD036H17T2A — — — 0 0 —
G4FD036H21T2A — — — — 0 —
G4FD042H21T2A — — — — 0 9
G4FD046H17T2A — — — — 0 9
G4FD048H21T2A — ———— 9
G4FD048H24T2A — ———— 9
G1HA024H14 61 2A + 0 2A + 0 — — —
G1HA036H14 75 — — 2A + 0 2A + 0 —
G1NA030S17K 63 2A + 0 2A + 0 — — —
G1NA030S21M 63 2A + 0 2A + 0 — — —
G1NA036S17J 67 — — 2A + 0 — —
G1NA036S17L 71 — — — 2A + 0 —
G1NA036S21C 67 — — 2A + 0 — —
G1NA042S24W 84 ————2A+9
G1NA048S21D 78 — — — 2A + 0 —
G1FA/G1UA030S14 65 2A + 0 2A + 0 — — —
G1FA/G1UA036S17,2 73 2A + 0 2A + 0 2A + 0 — —
G1FA/G1UA048S17 84 — — — 2A + 0 2A + 9
G1FA/G1UA048S2184————2A+9
G4FA030S14T2A — 0 0 — — —
G4FA036S17T2A — 0 0 0 — —
G4FA036S21T2A — 0 0 0 — —
G4FA048S17T2A — — — — 0 9
G4FA048S21T2A— ———— 9
F2RP/F2FP024 61 — 2A + 0 — — —
F2RP/F2FP030 65 — — 2A + 0 — —
F2RP/F2FP04278————2A+9
F4FP024H06T2A — — 2A + 0 — — —
F4FP030H06T2A — — — 2A + 0 — —
F4FP042H06T2A — ————2A+9

246814-YTG-D-0606
Unitary Products Group 5
1. G4FD coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. Single phase units require single phase 2HK heaters.
COOLING CAPACITY - With Air Handler Coils
UNIT MODEL
AIR HANDLER
COIL MODEL1
COOLING
MODEL ELECTRIC2
HEAT KW WRATED
CFM NET MBH SEER EER
TOTAL SENS.
1 PH 13 SEER AC WITH MV - VARIABLE SPEED
AY018MA321 MV12B 5,8,10 17 FC/MC18B 600 18.4 12.8 14.50 12.00
MV12B 5,8,10 17 G4FD024H17T2A 600 18.4 12.8 14.50 12.00
AY024MA321
MV12B 5,8,10 17 FC/MC24B 800 24.0 17.7 14.50 12.00
MV12B 5,8,10 17 FC/MC30B 800 24.0 17.7 14.50 12.00
MV12B 5,8,10 17 FC/MC36B 800 24.0 17.7 14.50 12.00
MV12B 5,8,10 17 G4FD030H17T2A 800 24.0 17.7 14.50 12.00
MV12B 5,8,10 17 G4FD036H17T2A 800 24.0 17.7 14.50 12.00
MV16C 5,8,10,15,18,20 21 FC/MC36C 800 24.0 17.7 14.50 12.00
AY030MA321
MV12B 5,8,10 17 FC/MC36B 1000 29.2 21.4 11.70 10.40
MV12B 5,8,10 17 FC/MC42B 1000 29.4 21.6 12.00 10.40
MV12B 5,8,10 17 G4FD036H17T2A 1000 29.2 21.4 11.70 10.40
MV12B 5,8,10 17 G4FD046H17T2A 1000 29.4 21.6 12.00 10.40
MV16C 5,8,10,15,18,20 21 FC/MC36C 1000 29.4 21.6 11.70 10.40
MV16C 5,8,10,15,18,20 21 FC/MC42C 1000 29.4 21.6 11.70 10.40
MV16C 5,8,10,15,18,20 21 G4FD036H21T2A 1000 29.4 21.6 11.70 10.40
MV16C 5,8,10,15,18,20 21 G4FD042H21T2A 1000 29.4 21.6 11.70 10.40
AY036MA321
MV12B 5,8,10 17 FC/MC42B 1200 35.8 25.9 13.75 11.00
MV12B 5,8,10 17 G4FD046H17T2A 1200 35.8 25.9 13.75 11.00
MV16C 5,8,10,15,18,20 21 FC/MC42C 1200 36.0 26.1 14.00 11.50
MV16C 5,8,10,15,18,20 21 FC/MC48C 1200 36.0 26.1 14.00 11.50
MV16C 5,8,10,15,18,20 21 G4FD042H21T2A 1200 36.0 26.1 14.00 11.50
MV16C 5,8,10,15,18,20 21 G4FD048H21T2A 1200 36.0 26.1 14.00 11.50
MV20D 8,10,15,18,20,25 24 FC/MC48D 1200 36.0 26.1 14.00 11.50
MV20D 8,10,15,18,20,25 24 G4FD048H24T2A 1200 36.0 26.1 14.00 11.50
1 PH 13 SEER AC WITH AHP
AY012MA321 AHP18 2,5,8 17 — 430 15.5 9.9 13.50 11.00
AY018MA321 AHP18 2,5,8 17 — 650 18.0 12.4 13.00 11.00
AHP24 2,5,8,10 17 — 655 18.0 12.4 13.00 11.00
AY024MA321 AHP24 2,5,8,10 17 — 830 23.4 17.1 13.00 11.00
AY030MA321 AHP36 5,8,10,15,18 17 — 1040 28.8 21.0 10.90 9.90
AY036MA321 AHP42 5,8,10,15,18 21 — 1255 35.4 25.5 13.00 11.00
1 PH 13 SEER AC WITH F4FP
AY018MA321 F4FP024H06T2A 5,8,10 17 — 600 18.0 12.4 13.00 11.00
AY024MA321 F4FP030H06T2A 5,8,10,15 17 — 800 23.4 17.1 13.00 11.00
AY036MA321 F4FP042H06T2A 5,8,10,15 24 — 1200 35.4 25.5 13.00 11.00
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.
Cooling MBH based on 80ºF entering air temperature, 50% RH, and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95ºF outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BUT’s during a normal annual usage period for cooling divided by the total electric power
input in watt-hours during the same period.

246814-YTG-D-0606
6Unitary Products Group
1. Requires a 2FD Blower Time Delay unless a standard furnace is equipped with one.
2. TXV = Use 1TVM2* kit on non-factory installed TXV coils.
** Refer to Quick Selection Chart for specific furnace match-up.
COOLING CAPACITY - Upflow, Downflow, & Horizontal Furnaces and Coils
UNIT MODEL FURNACE** COIL
MODEL
COOLING
CFM RANGE
(MIN.-MAX.) WRATED
CFM NET MBH SEER EER
TOTAL SENS.
AY012MA321
14,17 FC/MC/PC18 400 15.5 9.9 13.50 11.00
14 G4FA030S14T2A 400 15.5 9.9 13.50 11.00
17,21 G4FA036S17T2A 400 15.5 9.9 13.50 11.00
17,21 G4FA036S21T2A 400 15.5 9.9 13.50 11.00
250 14,17 G4FD024H14T2A 400 15.5 9.9 13.50 11.00
550 14,17 G4FD024H17T2A 400 15.5 9.9 13.50 11.00
17 G4FD030H17T2A 400 15.5 9.9 13.50 11.00
14 G4FD035H14T2A 400 15.5 9.9 13.50 11.00
14 HC24 400 15.5 9.9 13.50 11.00
14,17 UC18 400 15.5 9.9 13.50 11.00
AY018MA321
14,17 FC/MC/PC18 600 18.0 12.4 13.00 11.00
14 G4FA030S14T2A 600 18.0 12.4 13.00 11.00
17,21 G4FA036S17T2A 600 18.0 12.4 13.00 11.00
17,21 G4FA036S21T2A 600 18.0 12.4 13.00 11.00
450 14,17 G4FD024H14T2A 600 18.0 12.4 13.00 11.00
750 14,17 G4FD024H17T2A 600 18.0 12.4 13.00 11.00
17 G4FD030H17T2A 600 18.0 12.4 13.00 11.00
14 G4FD035H14T2A 600 18.0 12.4 13.00 11.00
14 HC24 600 18.0 12.4 13.00 11.00
14,17 UC18 600 18.0 12.4 13.00 11.00
AY024MA321
14,17 FC/MC/PC24 800 23.4 17.1 13.00 11.00
14,17 FC/MC/PC30 800 23.4 17.1 13.00 11.00
14,17,21 FC/MC/PC36 800 23.4 17.1 13.00 11.00
17,21 G4FA036S17T2A 800 23.4 17.1 13.00 11.00
600 17,21 G4FA036S21T2A 800 23.4 17.1 13.00 11.00
1000 17 G4FD030H17T2A 800 23.4 17.1 13.00 11.00
14 G4FD035H14T2A 800 23.4 17.1 13.00 11.00
17 G4FD036H17T2A 800 23.4 17.1 13.00 11.00
14 HC30 800 23.4 17.1 13.00 11.00
14,17 UC24 800 23.4 17.1 13.00 11.00
14,17 UC30 800 23.4 17.1 13.00 11.00
14,17,21 UC36 800 23.4 17.1 13.00 11.00
AY030MA321
14,17,21 FC/MC/PC36 1000 28.8 21.0 10.90 9.90
17,21 FC/MC/PC42 1000 28.8 21.0 10.90 9.90
17 G4FA048S17T2A 1000 28.8 21.0 10.90 9.90
17 G4FD036H17T2A 1000 28.8 21.0 10.90 9.90
800 21 G4FD036H21T2A 1000 28.8 21.0 10.90 9.90
1200 21 G4FD042H21T2A 1000 28.8 21.0 10.90 9.90
17 G4FD046H17T2A 1000 28.8 21.0 10.90 9.90
14 HC30 1000 28.8 21.0 10.90 9.90
14,17,21 UC36 1000 28.8 21.0 10.90 9.90
17,21 UC42 1000 28.8 21.0 10.90 9.90
AY036MA321
17,21 FC/MC/PC42 1200 35.4 25.5 13.00 11.00
21,24 FC/MC/PC48 1200 35.4 25.5 13.00 11.00
17 G4FA048S17T2A 1200 35.4 25.5 13.00 11.00
21 G4FA048S21T2A 1200 35.4 25.5 13.00 11.00
1000 21 G4FD042H21T2A 1200 35.4 25.5 13.00 11.00
1400 17 G4FD046H17T2A 1200 35.4 25.5 13.00 11.00
21,24 G4FD048H21T2A 1200 35.4 25.5 13.00 11.00
21,24 G4FD048H24T2A 1200 35.4 25.5 13.00 11.00
21 HC48 1200 35.4 25.5 13.00 11.00
17,21 UC42 1200 35.4 25.5 13.00 11.00
21,24 UC48 1200 35.4 25.5 13.00 11.00

246814-YTG-D-0606
Unitary Products Group 7
COOLING CAPACITY - Variable Speed Furnaces
UNIT MODEL VARIABLE SPEED COIL
MODEL WCOOLING
FURNACE MODEL RATED
CFM NET MBH SEER EER
TOTAL SENS.
AY018MA321
PV8*A12 FC/MC/PC18A 14 600 18.4 12.8 14.50 12.00
PV8*B16 FC/MC/PC18B 17 600 18.4 12.8 14.50 12.00
PV9*A12 FC/MC/PC18A 14 600 18.3 12.7 14.00 11.50
PV9*B12 FC/MC/PC18B 17 600 18.4 12.8 14.50 12.00
PV8*B16 G4FA036S17T2A 17 600 18.4 12.8 14.50 12.00
PV9*B12 G4FA036S17T2A 17 600 18.4 12.8 14.50 12.00
PV8*A12 G4FA030S14T2A 14 600 18.4 12.8 14.50 12.00
PV9*A12 G4FA030S14T2A 14 600 18.3 12.7 14.00 11.50
PV8*A12 G4FD024H14T2A 14 600 18.4 12.8 14.50 12.00
PV9*A12 G4FD024H14T2A 14 600 18.3 12.7 14.00 11.50
PV8*B16 G4FD024H17T2A 17 600 18.4 12.8 14.50 12.00
PV9*B12 G4FD024H17T2A 17 600 18.4 12.8 14.50 12.00
PV8*B16 G4FD030H17T2A 17 600 18.4 12.8 14.50 12.00
PV9*B12 G4FD030H17T2A 17 600 18.4 12.8 14.50 12.00
PV8*A12 G4FD035H14T2A 14 600 18.4 12.8 14.50 12.00
PV9*A12 G4FD035H14T2A 14 600 18.3 12.7 14.00 11.50
PV8*A12 HC24 14 600 18.4 12.8 14.50 12.00
PV9*A12 HC24 14 600 18.3 12.7 14.00 11.50
AY024MA321
PV8*A12 FC/MC/PC24A 14 800 23.8 17.5 14.00 11.50
PV9*A12 FC/MC/PC24A 14 800 23.8 17.5 14.00 11.50
PV8*B16 FC/MC/PC24B 17 800 23.8 17.5 14.00 11.50
PV9*B12 FC/MC/PC24B 17 800 23.8 17.5 14.00 11.50
PV8*A12 FC/MC/PC30A 14 800 23.8 17.5 14.00 11.50
PV9*A12 FC/MC/PC30A 14 800 23.8 17.5 14.00 11.50
PV8*B16 FC/MC/PC30B 17 800 23.8 17.5 14.00 11.50
PV9*B12 FC/MC/PC30B 17 800 23.8 17.5 14.00 11.50
PV8*A12 FC/MC/PC36A 14 800 23.8 17.5 14.00 11.50
PV8*B16 FC/MC/PC36B 17 800 23.8 17.5 14.00 11.50
PV9*A12 FC/MC/PC36A 14 800 23.8 17.5 14.00 11.50
PV9*B12 FC/MC/PC36B 17 800 23.8 17.5 14.00 11.50
PV8*B16 G4FA036S17T2A 17 800 23.6 17.3 14.00 11.50
PV9*B12 G4FA036S17T2A 17 800 23.8 17.5 14.00 11.50
PV8*B16 G4FD030H17T2A 17 800 23.6 17.3 14.00 11.50
PV9*B12 G4FD030H17T2A 17 800 23.6 17.3 14.00 11.50
PV8*A12 G4FD035H14T2A 14 800 23.6 17.3 14.00 11.50
PV9*A12 G4FD035H14T2A 14 800 23.6 17.3 14.00 11.50
PV8*B16 G4FD036H17T2A 17 800 23.8 17.5 14.00 11.50
PV9*B12 G4FD036H17T2A 17 800 23.8 17.5 14.00 11.50
PV8*A12 HC30 14 800 23.8 17.5 14.00 11.50
PV9*A12 HC30 14 800 23.8 17.5 14.00 11.50
AY030MA321
PV8*A12 FC/MC/PC36A 14 1000 29.0 21.2 11.50 9.90
PV8*B16 FC/MC/PC36B 17 1000 29.4 21.6 11.70 10.40
PV8*C16 FC/MC/PC36C 21 1000 29.4 21.6 11.70 10.40
PV8*C20 FC/MC/PC36C 21 1000 29.4 21.6 12.20 10.40
PV9*A12 FC/MC/PC36A 14 1000 29.0 21.2 11.30 9.90
PV9*B12 FC/MC/PC36B 17 1000 29.2 21.4 11.50 9.90
PV9*C16 FC/MC/PC36C 21 1000 29.2 21.4 11.70 10.40
PV9*C20 FC/MC/PC36C 21 1000 29.2 21.4 11.70 10.40
PV8*B16 FC/MC/PC42B 17 1000 29.4 21.6 11.70 10.40
PV8*C16 FC/MC/PC42C 21 1000 29.4 21.6 12.20 10.40
PV8*C20 FC/MC/PC42C 21 1000 29.4 21.6 12.20 10.40
PV9*B12 FC/MC/PC42B 17 1000 29.2 21.4 11.70 10.40
PV9*C16 FC/MC/PC42C 21 1000 29.2 21.4 11.70 10.40
PV9*C20 FC/MC/PC42C 21 1000 29.2 21.4 11.70 10.40
PV8*B16 G4FA048S17T2A 17 1000 29.4 21.6 11.70 10.40
PV9*B12 G4FA048S17T2A 17 1000 29.2 21.4 11.70 10.40

246814-YTG-D-0606
8Unitary Products Group
1. G4FD coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. Variable speed furnaces have B.O.D. (Blower on Delay) standard.
COOLING CAPACITY - VARIABLE SPEED FURNACES (CONTINUED)
UNIT MODEL VARIABLE SPEED COIL
MODEL WCOOLING
FURNACE MODEL RATED
CFM NET MBH SEER EER
TOTAL SENS.
AY030MA321
PV8*B16 G4FD036H17T2A 17 1000 29.4 21.6 11.70 10.40
PV9*B12 G4FD036H17T2A 17 1000 29.2 21.4 11.50 9.90
PV8*C16 G4FD036H21T2A 21 1000 29.4 21.6 11.70 10.40
PV8*C20 G4FD036H21T2A 21 1000 29.4 21.6 11.70 10.40
PV9*C16 G4FD036H21T2A 21 1000 29.2 21.4 11.70 10.40
PV9*C20 G4FD036H21T2A 21 1000 29.2 21.4 11.70 10.40
PV8*C16 G4FD042H21T2A 21 1000 29.4 21.6 12.20 10.40
PV8*C20 G4FD042H21T2A 21 1000 29.4 21.6 12.20 10.40
PV9*C16 G4FD042H21T2A 21 1000 29.2 21.4 11.70 10.40
PV9*C20 G4FD042H21T2A 21 1000 29.2 21.4 11.70 10.40
PV8*B16 G4FD046H17T2A 17 1000 29.4 21.6 11.70 10.40
PV9*B12 G4FD046H17T2A 17 1000 29.4 21.6 11.70 10.40
PV8*A12 HC30 14 1000 29.0 21.2 11.50 9.90
PV9*A12 HC30 14 1000 29.0 21.2 11.30 9.90
AY036MA321
PV8*B16 FC/MC/PC42B 17 1200 35.8 25.9 14.00 11.50
PV8*C16 FC/MC/PC42C 21 1200 36.0 26.1 14.00 11.50
PV8*C20 FC/MC/PC42C 21 1200 36.0 26.1 14.00 11.50
PV9*B12 FC/MC/PC42B 17 1200 35.6 25.7 13.00 11.00
PV9*C16 FC/MC/PC42C 21 1200 35.8 25.9 13.75 11.00
PV9*C20 FC/MC/PC42C 21 1200 35.8 25.9 13.75 11.00
PV8*C16 FC/MC/PC48C 21 1200 36.0 26.1 14.00 11.50
PV8*C20 FC/MC/PC48C 21 1200 36.0 26.1 14.00 11.50
PV9*C16 FC/MC/PC48C 21 1200 35.8 25.9 14.00 11.50
PV9*C20 FC/MC/PC48C 21 1200 35.8 25.9 14.00 11.50
PV9*D20 FC/MC/PC48D 24 1200 35.8 25.9 14.00 11.50
PV8*B16 G4FA048S17T2A 17 1200 35.8 25.9 14.00 11.50
PV9*B12 G4FA048S17T2A 17 1200 35.6 25.7 13.50 11.00
PV8*C16 G4FA048S21T2A 21 1200 36.0 26.1 14.00 11.50
PV8*C20 G4FA048S21T2A 21 1200 36.0 26.1 14.00 11.50
PV9*C16 G4FA048S21T2A 21 1200 35.8 25.9 13.75 11.00
PV9*C20 G4FA048S21T2A 21 1200 35.8 25.9 13.75 11.00
PV8*C16 G4FD042H21T2A 21 1200 36.0 26.1 14.00 11.50
PV8*C20 G4FD042H21T2A 21 1200 36.0 26.1 14.00 11.50
PV9*C16 G4FD042H21T2A 21 1200 35.8 25.9 13.75 11.00
PV9*C20 G4FD042H21T2A 21 1200 35.8 25.9 13.75 11.00
PV8*B16 G4FD046H17T2A 17 1200 35.8 25.9 14.00 11.50
PV9*B12 G4FD046H17T2A 17 1200 35.6 25.7 13.50 11.00
PV8*C16 G4FD048H21T2A 21 1200 36.0 26.1 14.00 11.50
PV8*C20 G4FD048H21T2A 21 1200 36.0 26.1 14.00 11.50
PV9*C16 G4FD048H21T2A 21 1200 35.8 25.9 14.00 11.50
PV9*C20 G4FD048H21T2A 21 1200 35.8 25.9 14.00 11.50
PV9*D20 G4FD048H24T2A 24 1200 35.8 25.9 14.00 11.50
PV8*C16 HC48 21 1200 36.0 26.1 14.00 11.50
PV8*C20 HC48 21 1200 36.0 26.1 14.00 11.50
PV9*C16 HC48 21 1200 35.8 25.9 13.75 11.00
PV9*C20 HC48 21 1200 35.8 25.9 14.00 11.50

246814-YTG-D-0606
Unitary Products Group 9
ACCESSORIES*
Refer to Price Manual for specific model numbers.
OFF CYCLE TIMER DELAY - Provides a 5-minute off cycle to pre-
vent rapid recycling of the compressor.
ROOM THERMOSTATS - A wide selection of compatible thermosets
are available to provide optimum performance and features for any
installation.
1H/1C, manual change-over electronic non-programmable therm
stat.
1H/1C, auto/manual changeover, electronic programmable, deluxe
7-day, thermostat.
1H/1C, auto/manual changeover, electronic programmable.
* For the most current accessory information, refer to the price book
or consult factory.
SOUND POWER RATINGS*
*Rated in accordance with ARI 270-95 Standards.
UNIT MODEL (dBA)
012 74
018 72
024 75
030 75
036 76
MATCHING INDOOR COMPONENTS
FC
FULL CASED
UPFLOW
MC
MULTI-POSITION
(UPFLOW, HORIZONTAL
AND DOWNFLOW)
PC
1/2 CASED
UPFLOW
HC
FULL CASED
HORIZONTAL
UC
1/2 CASED
UPFLOW
G4FD*
MULTI-POSITION
(UPFLOW, HORIZONTAL
AND DOWNFLOW)
G4FA*
FULL CASED
UPFLOW

246814-YTG-D-0606
10 Unitary Products Group
TYPICAL INSTALLATION
THERMOSTAT
SEAL OPENING(S) WITH
PERMAGUM OR EQUIVALENT
TO INDOOR COIL
TO FURNACE OR
AIR HANDLER
TERMINAL BLOCK
NEC CLASS 2 WIRING
NEC CLASS 1 WIRING
NOTE:ALL OUTDOOR WIRING
MUST BE WEATHERPROOF.
CONTROL ACCESS PANEL
WEATHERPROOF
DISCONNECT
SWITCH
MINIMUM 24” SERVICE ACCESS
CLEARANCE ON ONE SIDE
48” OVERHEAD
CLEARANCE
12” CLEARANCE
AROUND PERIMETER
TYPICAL FIELD WIRING
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES
POWER WIRING
208/230-1-60
CONTACTOR
TERMINALS
COIL
GND.
LUG
CYRGW
YRGW
POWER WIRING
CONTROL WIRING
FACTORY WIRING
24 VOLT CONTROL WIRING
MINIMUM 18 GA. WIRE
(NEC CLASS 2) FURNACE OR AIR HANDLER TERMINAL BLOCK
ROOM THERMOSTAT
CONDENSING UNIT
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.
TERMINAL W IS ONLY
REQUIRED ON SYSTEMS
WITH HEAT.
*
*

246814-YTG-D-0606
Unitary Products Group 11
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. AY012MA321
INDOOR COIL MODEL NO. G2FD024S17
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 250 400 550
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65 T.C. 10.5 14.0 13.4 15.1 16.6 13.9 15.6 15.3 17.4 18.9 17.3 17.2 17.2 19.6 21.1 S.C. 10.7 9.7 8.1 8.3 7.0 14.2 12.2 10.5 11.1 8.6 17.6 14.6 12.9 13.9 10.3
KW 1.0 1.1 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
75 T.C. 10.4 13.6 13.1 14.8 16.5 13.6 15.2 14.9 16.7 18.4 16.8 16.8 16.7 18.7 20.4 S.C. 10.6 9.5 7.9 8.1 7.0 13.8 12.2 10.3 10.7 8.6 17.0 14.8 12.8 13.3 10.2
KW 1.1 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2
85 T.C. 10.3 13.2 12.8 14.5 16.4 13.3 14.8 14.5 16.1 18.0 16.3 16.4 16.1 17.8 19.7 S.C. 10.3 9.2 7.6 7.9 6.9 13.4 12.1 10.2 10.3 8.6 16.5 15.0 12.7 12.7 10.2
KW 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
95 T.C. 10.2 12.7 12.4 14.1 16.3 13.0 14.3 14.0 15.5 17.6 15.8 16.0 15.6 16.9 18.9 S.C. 10.0 8.9 7.4 7.7 6.9 13.0 12.1 10.0 9.9 8.5 15.9 15.3 12.6 12.1 10.1
KW 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
105 T.C. 9.9 11.9 11.6 13.4 15.4 12.5 13.5 13.1 14.7 16.6 15.1 15.2 14.7 16.0 17.8 S.C. 9.8 8.5 7.0 7.5 6.5 12.5 11.4 9.5 9.7 8.0 15.3 14.3 12.1 11.9 9.6
KW 1.5 1.5 1.5 1.5 1.6 1.5 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
115 T.C. 9.6 11.1 10.7 12.7 14.6 12.0 12.7 12.3 13.9 15.7 14.4 14.4 13.8 15.1 16.8 S.C. 9.5 8.1 6.5 7.3 6.1 12.1 10.8 9.0 9.5 7.5 14.6 13.4 11.5 11.7 9.0
KW 1.6 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.8 1.7 1.7 1.8 1.8
125 T.C. 9.3 10.3 9.8 11.9 13.7 11.5 12.0 11.4 13.1 14.7 13.7 13.6 12.9 14.3 15.7 S.C. 9.2 7.8 6.1 7.0 5.7 11.6 10.1 8.6 9.3 7.1 14.0 12.5 11.0 11.5 8.4
KW 1.8 1.8 1.8 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
AHP18 — 1.00 1.00 1.00
— FC/MC/PC18 1.00 1.00 1.00
— G4FA030S14T2A 1.00 1.00 1.00
— G4FA036S17T2A 1.00 1.00 1.00
— G4FA036S21T2A 1.00 1.00 1.00
— G4FD024H14T2A 1.00 1.00 1.00
— G4FD024H17T2A 1.00 1.00 1.00
— G4FD030H17T2A 1.00 1.00 1.00
— G4FD035H14T2A 1.00 1.00 1.00
— HC24 1.00 1.00 1.00
— UC18 1.00 1.00 1.00
Variable Speed
Furnace Coil T.C. S.C. KW
—————
—————
—————
—————
—————
—————

246814-YTG-D-0606
12 Unitary Products Group
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. AY018MA321
INDOOR COIL MODEL NO. G2FD024S17
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 450 600 750
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65 T.C. 16.3 18.5 18.6 20.3 22.1 17.8 19.1 19.1 20.8 22.5 19.3 19.7 19.7 21.2 22.9 S.C. 15.414.012.312.1 9.8 17.015.813.813.410.918.617.715.314.812.1
KW 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2
75 T.C. 15.9 17.5 17.6 19.3 21.3 17.3 18.2 18.2 19.9 21.7 18.6 18.8 18.9 20.4 22.1 S.C. 15.0 13.4 11.7 11.6 9.5 16.5 15.3 13.3 13.1 10.6 17.9 17.2 14.9 14.6 11.8
KW 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
85 T.C. 15.6 16.6 16.6 18.3 20.5 16.7 17.2 17.3 18.9 20.9 17.9 17.9 18.1 19.6 21.2 S.C. 14.7 12.9 11.1 11.1 9.3 16.0 14.7 12.8 12.7 10.3 17.3 16.6 14.4 14.4 11.4
KW 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
95 T.C. 15.2 15.6 15.6 17.3 19.7 16.2 16.3 16.4 18.0 20.0 17.2 17.0 17.3 18.7 20.4 S.C. 14.3 12.3 10.5 10.6 9.1 15.5 14.2 12.3 12.4 10.0 16.6 16.1 14.0 14.2 11.0
KW 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
105 T.C. 13.9 14.6 14.7 16.3 18.6 15.1 15.3 15.4 17.0 18.9 16.3 15.9 16.1 17.6 19.3 S.C. 13.0 11.8 10.0 10.2 8.6 14.2 13.4 11.6 11.9 9.6 15.4 15.0 13.3 13.7 10.7
KW 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
115 T.C. 12.7 13.7 13.7 15.3 17.5 14.0 14.3 14.4 15.9 17.8 15.3 14.9 15.0 16.6 18.2 S.C. 11.8 11.2 9.5 9.7 8.2 13.0 12.5 11.1 11.4 9.2 14.3 13.8 12.6 13.2 10.3
KW 1.9 1.9 1.9 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0
125 T.C. 11.4 12.8 12.8 14.4 16.4 12.9 13.3 13.3 14.9 16.7 14.4 13.9 13.8 15.5 17.1 S.C. 10.5 10.7 9.0 9.2 7.7 11.8 11.7 10.5 11.0 8.9 13.2 12.7 11.9 12.7 10.0
KW 2.1 2.1 2.1 2.2 2.2 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
MV12B FC/MC18B 1.02 1.03 0.94
MV12B G4FD024H17T2A 1.02 1.03 0.94
AHP18 — 1.00 1.00 1.00
AHP24 — 1.00 1.00 1.00
F4FP024H06T2A — 1.00 1.00 1.00
— FC/MC/PC18 1.00 1.00 1.00
— G4FA030S14T2A 1.00 1.00 1.00
— G4FA036S17T2A 1.00 1.00 1.00
— G4FA036S21T2A 1.00 1.00 1.00
— G4FD024H14T2A 1.00 1.00 1.00
— G4FD024H17T2A 1.00 1.00 1.00
— G4FD030H17T2A 1.00 1.00 1.00
— G4FD035H14T2A 1.00 1.00 1.00
— HC24 1.00 1.00 1.00
— UC18 1.00 1.00 1.00
Variable Speed
Furnace Coil T.C. S.C. KW
PV8*A12 FC/MC/PC18A 1.02 1.03 0.94
PV8*B16 FC/MC/PC18B 1.02 1.03 0.94
PV9*A12 FC/MC/PC18A 1.02 1.02 0.97
PV9*B12 FC/MC/PC18B 1.02 1.03 0.94
PV8*B16 G4FA036S17T2A 1.02 1.03 0.94
PV9*B12 G4FA036S17T2A 1.02 1.03 0.94
PV8*A12 G4FA030S14T2A 1.02 1.03 0.94
PV9*A12 G4FA030S14T2A 1.02 1.02 0.97
PV8*A12 G4FD024H14T2A 1.02 1.03 0.94
PV9*A12 G4FD024H14T2A 1.02 1.02 0.97
PV8*B16 G4FD024H17T2A 1.02 1.03 0.94
PV9*B12 G4FD024H17T2A 1.02 1.03 0.94
PV8*B16 G4FD030H17T2A 1.02 1.03 0.94
PV9*B12 G4FD030H17T2A 1.02 1.03 0.94
PV8*A12 G4FD035H14T2A 1.02 1.03 0.94
PV8*B16 FC/MC/PC18B 1.02 1.03 0.94
PV9*A12 FC/MC/PC18A 1.02 1.02 0.97

246814-YTG-D-0606
Unitary Products Group 13
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. AY024MA321
INDOOR COIL MODEL NO. G2FD030S17
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 600 800 1000
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65 T.C. 21.4 24.0 23.7 25.8 28.6 23.5 24.7 24.2 26.2 28.6 25.5 25.3 24.8 26.5 28.7 S.C. 20.6 19.1 16.1 16.3 13.0 22.7 21.8 18.6 18.3 14.3 24.7 24.5 21.0 20.4 15.6
KW 1.6 1.6 1.6 1.6 1.5 1.6 1.5 1.6 1.5 1.5 1.5 1.5 1.6 1.5 1.5
75 T.C. 20.9 23.0 22.6 25.0 27.5 22.6 23.6 23.2 25.2 27.5 24.4 24.2 23.8 25.4 27.4 S.C. 20.1 18.6 15.6 15.9 12.7 21.9 21.0 18.0 17.9 13.9 23.6 23.4 20.4 20.0 15.2
KW 1.8 1.7 1.8 1.7 1.7 1.7 1.7 1.8 1.7 1.7 1.7 1.7 1.7 1.7 1.7
85 T.C. 20.3 21.9 21.6 24.2 26.4 21.8 22.5 22.2 24.3 26.3 23.2 23.0 22.7 24.4 26.2 S.C. 19.7 18.1 15.1 15.4 12.4 21.1 20.2 17.5 17.5 13.6 22.5 22.3 19.8 19.6 14.8
KW 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
95 T.C. 19.7 20.9 20.6 23.4 25.4 20.9 21.4 21.1 23.4 25.2 22.1 21.9 21.7 23.4 25.0 S.C. 19.2 17.6 14.6 15.0 12.1 20.3 19.4 16.9 17.1 13.2 21.4 21.2 19.2 19.2 14.3
KW 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
105 T.C. 18.9 19.8 19.4 22.1 24.1 19.8 20.3 19.9 22.1 23.9 20.8 20.8 20.4 22.0 23.6 S.C. 18.3 17.0 14.1 14.5 11.6 19.2 18.6 16.3 16.6 12.8 20.2 20.1 18.5 18.7 13.9
KW 2.3 2.3 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
115 T.C. 18.0 18.8 18.3 20.9 22.9 18.8 19.2 18.7 20.8 22.6 19.6 19.7 19.1 20.8 22.3 S.C. 17.5 16.5 13.6 14.1 11.2 18.2 17.8 15.7 16.1 12.3 18.9 19.1 17.8 18.2 13.5
KW 2.5 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6
125 T.C. 17.1 17.7 17.3 19.6 21.7 17.7 18.2 17.5 19.5 21.3 18.3 18.6 17.8 19.5 21.0 S.C. 16.6 16.0 13.0 13.6 10.8 17.2 17.0 15.0 15.6 11.9 17.7 18.1 17.0 17.7 13.1
KW 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.9 2.8 2.8 2.8 2.8 2.9
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
MV12B FC/MC24B 1.03 1.04 0.94
MV12B FC/MC30B 1.03 1.04 0.94
MV12B FC/MC36B 1.03 1.04 0.94
MV12B G4FD030H17T2A 1.03 1.04 0.94
MV12B G4FD036H17T2A 1.03 1.04 0.94
MV16C FC/MC36C 1.03 1.04 0.94
AHP24 — 1.00 1.00 1.00
F4FP030H06T2A — 1.00 1.00 1.00
— FC/MC/PC24 1.00 1.00 1.00
— FC/MC/PC30 1.00 1.00 1.00
— FC/MC/PC36 1.00 1.00 1.00
— G4FA036S17T2A 1.00 1.00 1.00
— G4FA036S21T2A 1.00 1.00 1.00
— G4FD030H17T2A 1.00 1.00 1.00
— G4FD035H14T2A 1.00 1.00 1.00
— G4FD036H17T2A 1.00 1.00 1.00
— HC30 1.00 1.00 1.00
— UC24 1.00 1.00 1.00
— UC30 1.00 1.00 1.00
— UC36 1.00 1.00 1.00
Variable Speed
Furnace Coil T.C. S.C. KW
PV8*A12 FC/MC/PC24A 1.02 1.02 0.97
PV9*A12 FC/MC/PC24A 1.02 1.02 0.97
PV8*B16 FC/MC/PC24B 1.02 1.02 0.97
PV9*B12 FC/MC/PC24B 1.02 1.02 0.97
PV8*A12 FC/MC/PC30A 1.02 1.02 0.97
PV9*A12 FC/MC/PC30A 1.02 1.02 0.97
PV8*B16 FC/MC/PC30B 1.02 1.02 0.97
PV9*B12 FC/MC/PC30B 1.02 1.02 0.97
PV8*A12 FC/MC/PC36A 1.02 1.02 0.97
PV8*B16 FC/MC/PC36B 1.02 1.02 0.97
PV9*A12 FC/MC/PC36A 1.02 1.02 0.97
PV9*B12 FC/MC/PC36B 1.02 1.02 0.97
PV8*B16 G4FA036S17T2A 1.01 1.01 0.96
PV9*B12 G4FA036S17T2A 1.02 1.02 0.97
PV8*B16 G4FD030H17T2A 1.01 1.01 0.96
PV9*B12 G4FD030H17T2A 1.01 1.01 0.96
PV8*A12 G4FD035H14T2A 1.01 1.01 0.96
PV9*A12 G4FD035H14T2A 1.01 1.01 0.96
PV8*B16 G4FD036H17T2A 1.02 1.02 0.97
PV9*B12 G4FD036H17T2A 1.02 1.02 0.97
PV8*A12 HC30 1.02 1.02 0.97
PV9*A12 HC30 1.02 1.02 0.97

246814-YTG-D-0606
14 Unitary Products Group
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. AY030MA321
INDOOR COIL MODEL NO. G2FD036S17
CONDENSER
ENTERING AIR
TEMPERATUR
ID CFM 800 1000 1200
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65 T.C. 27.2 30.0 29.5 32.7 35.7 28.7 30.4 30.1 33.0 35.7 30.1 30.7 30.6 33.4 35.6 S.C. 25.6 24.4 20.7 20.5 16.4 27.1 26.7 23.0 22.6 17.8 28.6 29.0 25.4 24.7 19.2
KW 1.9 1.9 1.9 1.9 2.0 1.9 1.9 1.9 1.9 2.0 1.9 1.9 1.9 2.0 2.0
75 T.C. 26.6 28.8 28.4 31.4 34.3 28.0 29.2 28.8 31.6 34.3 29.3 29.6 29.3 31.8 34.3 S.C. 25.1 23.7 20.0 20.0 15.9 16.4 25.8 22.1 22.1 17.2 27.8 28.0 24.2 24.1 18.5
KW 2.1 2.1 2.1 2.2 2.2 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
85 T.C. 26.1 27.6 27.2 30.1 32.9 27.2 28.1 27.6 30.2 33.0 28.4 28.5 28.0 30.3 33.0 S.C. 24.5 22.9 19.2 19.5 15.5 25.7 25.0 21.1 21.5 16.6 27.0 27.1 23.0 23.6 17.8
KW 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
95 T.C. 25.5 26.4 26.1 28.9 31.5 26.5 26.9 26.4 28.8 31.6 27.5 27.4 26.6 28.7 31.7 S.C. 23.9 22.2 18.5 19.0 15.0 25.0 24.2 20.2 21.0 16.0 26.2 26.1 21.8 23.0 17.1
KW 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.7 2.6 2.6 2.6 2.6 2.7
105 T.C. 24.6 25.3 25.0 27.5 30.2 25.5 25.8 25.3 27.5 30.2 26.4 26.3 25.5 27.5 30.1 S.C. 23.0 21.8 18.1 18.4 14.6 24.1 23.4 19.8 20.5 15.7 25.1 25.0 21.6 22.6 16.8
KW 2.8 2.8 2.8 2.9 2.9 2.8 2.9 2.8 2.9 2.9 2.9 2.9 2.9 2.9 3.0
115 T.C. 23.7 24.2 24.0 26.3 28.9 24.5 24.7 24.2 26.3 28.8 25.3 25.1 24.4 26.3 28.6 S.C. 22.2 21.4 17.6 17.9 14.3 23.2 22.6 19.5 20.1 15.4 24.1 23.9 21.4 22.2 16.4
KW 3.1 3.1 3.1 3.1 3.2 3.1 3.1 3.1 3.2 3.2 3.2 3.2 3.2 3.2 3.2
125 T.C. 22.8 23.2 23.0 25.0 27.7 23.5 23.6 23.2 25.1 27.4 24.3 23.9 23.4 25.1 27.1 S.C. 21.4 21.0 17.2 17.4 14.0 22.3 21.9 19.2 19.6 15.0 23.1 22.8 21.3 21.8 16.1
KW 3.3 3.3 3.3 3.4 3.5 3.4 3.4 3.4 3.4 3.5 3.4 3.4 3.4 3.4 3.5
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
MV12B FC/MC36B 1.01 1.02 0.97
MV12B FC/MC42B 1.02 1.03 0.98
MV12B G4FD036H17T2A 1.01 1.02 0.97
MV12B G4FD046H17T2A 1.02 1.03 0.98
MV16C FC/MC36C 1.02 1.03 0.98
MV16C FC/MC42C 1.02 1.03 0.98
MV16C G4FD036H21T2A 1.02 1.03 0.98
MV16C G4FD042H21T2A 1.02 1.03 0.98
AHP36 — 1.00 1.00 1.00
— FC/MC/PC36 1.00 1.00 1.00
— FC/MC/PC42 1.00 1.00 1.00
— G4FA048S17T2A 1.00 1.00 1.00
— G4FD036H17T2A 1.00 1.00 1.00
— G4FD036H21T2A 1.00 1.00 1.00
— G4FD042H21T2A 1.00 1.00 1.00
— G4FD046H17T2A 1.00 1.00 1.00
— HC30 1.00 1.00 1.00
— UC36 1.00 1.00 1.00
— UC42 1.00 1.00 1.00
Variable Speed Furnace Coil T.C. S.C. KW
PV8*A12 FC/MC/PC36A 1.01 1.01 1.01
PV8*B16 FC/MC/PC36B 1.02 1.03 0.98
PV8*C16 FC/MC/PC36C 1.0 1.03 0.98
PV8*C20 FC/MC/PC36C 1.02 1.03 0.94
PV9*A12 FC/MC/PC36A 1.01 1.01 1.01
PV9*B12 FC/MC/PC36B 1.01 1.02 1.01
PV9*C16 FC/MC/PC36C 1.01 1.02 0.97
PV9*C20 FC/MC/PC36C 1.01 1.02 0.97
PV8*B16 FC/MC/PC42B 1.02 1.03 0.98
PV8*C16 FC/MC/PC42C 1.02 1.03 0.94
PV8*C20 FC/MC/PC42C 1.02 1.03 0.94
PV9*B12 FC/MC/PC42B 1.01 1.02 0.97
PV9*C16 FC/MC/PC42C 1.01 1.02 0.97
PV9*C20 FC/MC/PC42C 1.01 1.02 0.97
PV8*B16 G4FA048S17T2A 1.02 1.03 0.98
PV9*B12 G4FA048S17T2A 1.01 1.02 0.97
PV8*B16 G4FD036H17T2A 1.0 1.03 0.98
PV9*B12 G4FD036H17T2A 1.01 1.02 1.01
PV8*C16 G4FD036H21T2A 1.02 1.03 0.98
PV8*C20 G4FD036H21T2A 1.02 1.03 0.94
PV9*C16 G4FD036H21T2A 1.01 1.02 0.97
PV9*C20 G4FD036H21T2A 1.01 1.02 0.97
PV8*C16 G4FD042H21T2A 1.02 1.03 0.94
PV8*C20 G4FD042H21T2A 1.02 1.03 0.94
PV9*C16 G4FD042H21T2A 1.01 1.02 0.97
PV9*C20 G4FD042H21T2A 1.01 1.02 0.97
PV8*B16 G4FD046H17T2A 1.02 1.03 0.98
PV9*B12 G4FD046H17T2A 1.02 1.03 0.98
PV8*A12 HC30 1.01 1.01 1.01
PV9*A12 HC30 1.01 1.01 1.01

246814-YTG-D-0606
Unitary Products Group 15
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. AY036MA321
INDOOR COIL MODEL NO. G2FD042S21
CONDENSER
ENTERING AIR
TEMPERATURE
ID CFM 1000 1200 1400
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65 T.C. 32.8 38.1 37.1 40.4 46.6 35.6 38.7 37.7 41.4 46.9 38.3 39.3 38.4 42.3 47.2 S.C. 32.8 30.6 25.5 25.6 21.0 35.4 33.3 27.6 27.8 22.0 37.5 36.0 29.8 29.9 22.9
KW 2.5 2.5 2.5 2.5 2.6 2.5 2.5 2.5 2.5 2.6 2.5 2.5 2.5 2.5 2.6
75 T.C. 32.0 35.9 35.4 38.5 43.7 34.2 36.6 35.9 39.4 44.1 36.4 37.2 36.4 40.3 44.4 S.C. 32.0 29.6 24.8 24.8 20.5 33.8 32.3 26.9 27.0 21.7 35.6 34.9 29.0 29.2 22.9
KW 2.7 2.7 2.7 2.7 2.8 2.7 2.7 2.7 2.8 2.8 2.7 2.7 2.7 2.8 2.8
85 T.C. 31.2 33.8 33.7 36.6 40.9 32.9 34.5 34.1 37.4 41.3 34.5 35.2 34.5 38.2 41.6 S.C. 30.7 28.6 24.1 23.9 20.0 32.2 31.2 26.2 26.2 21.4 33.6 33.9 28.2 28.5 22.8
KW 2.9 2.9 2.9 3.0 3.0 2.9 2.9 2.9 3.0 3.1 3.0 3.0 2.9 3.0 3.1
95 T.C. 30.4 31.6 32.0 34.7 38.0 31.5 32.3 32.3 35.4 38.4 32.6 33.1 32.5 36.1 38.9 S.C. 29.3 27.6 23.4 23.1 19.5 30.5 30.2 25.4 25.4 21.1 31.7 32.8 27.4 27.7 22.7
KW 3.1 3.1 3.1 3.2 3.3 3.1 3.2 3.1 3.2 3.3 3.2 3.2 3.2 3.2 3.3
105 T.C. 28.7 29.5 29.8 32.5 35.7 29.9 30.4 30.2 33.1 36.1 31.0 31.2 30.5 33.6 36.6 S.C. 27.8 26.5 22.5 22.4 18.6 28.9 28.8 24.4 24.6 20.1 30.0 31.0 26.4 26.8 21.6
KW 3.3 3.3 3.3 3.4 3.5 3.4 3.4 3.3 3.4 3.5 3.4 3.4 3.4 3.5 3.6
115 T.C. 27.1 27.6 27.7 30.4 33.5 28.3 28.5 28.2 30.8 33.9 29.4 29.4 28.6 31.2 34.3 S.C. 26.2 25.4 21.6 21.7 17.7 27.2 27.4 23.5 23.8 19.1 28.3 29.3 25.3 25.9 20.5
KW 3.5 3.5 3.5 3.6 3.7 3.6 3.6 3.5 3.7 3.8 3.6 3.6 3.6 3.7 3.8
125 T.C. 25.4 25.6 25.6 28.2 31.3 26.6 26.6 26.1 28.5 31.7 27.8 27.6 26.7 28.8 32.0 S.C. 24.7 24.3 20.7 21.0 16.8 25.6 25.9 22.5 23.0 18.1 26.6 27.5 24.3 24.9 19.4
KW 3.7 3.7 3.7 3.8 4.0 3.8 3.8 3.7 3.9 4.0 3.9 3.9 3.8 3.9 4.0
NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
Air Handler Coil T.C. S.C. KW
MV12B FC/MC42B 1.01 1.02 1.01
MV12B G4FD046H17T2A 1.01 1.02 1.01
MV16C FC/MC42C 1.02 1.02 0.97
MV16C FC/MC48C 1.02 1.02 0.97
MV16C G4FD042H21T2A 1.02 1.02 0.97
MV16C G4FD048H21T2A 1.02 1.02 0.97
MV20D FC/MC48D 1.02 1.02 0.97
MV20D G4FD048H24T2A 1.02 1.02 0.97
AHP42 — 1.00 1.00 1.00
F4FP042H06T2A — 1.00 1.00 1.00
— FC/MC/PC42 1.00 1.00 1.00
— FC/MC/PC48 1.00 1.00 1.00
— G4FA048S17T2A 1.00 1.00 1.00
— G4FA048S21T2A 1.00 1.00 1.00
— G4FD042H21T2A 1.00 1.00 1.00
— G4FD046H17T2A 1.00 1.00 1.00
— G4FD048H21T2A 1.00 1.00 1.00
— G4FD048H24T2A 1.00 1.00 1.00
— HC48 1.00 1.00 1.00
— UC42 1.00 1.00 1.00
— UC48 1.00 1.00 1.00
Variable Speed
Furnace Coil T.C. S.C. KW
PV8*B16 FC/MC/PC42B 1.01 1.02 0.97
PV8*C16 FC/MC/PC42C 1.02 1.02 0.97
PV8*C20 FC/MC/PC42C 1.02 1.02 0.97
PV9*B12 FC/MC/PC42B 1.01 1.01 1.01
PV9*C16 FC/MC/PC42C 1.01 1.02 1.01
PV9*C20 FC/MC/PC42C 1.01 1.02 1.01
PV8*C16 FC/MC/PC48C 1.02 1.02 0.97
PV8*C20 FC/MC/PC48C 1.02 1.02 0.97
PV9*C16 FC/MC/PC48C 1.01 1.02 0.97
PV9*C20 FC/MC/PC48C 1.01 1.02 0.97
PV9*D20 FC/MC/PC48D 1.01 1.02 0.97
PV8*B16 G4FA048S17T2A 1.01 1.02 0.97
PV9*B12 G4FA048S17T2A 1.01 1.01 1.01
PV8*C16 G4FA048S21T2A 1.02 1.02 0.97
PV8*C20 G4FA048S21T2A 1.02 1.02 0.97
PV9*C16 G4FA048S21T2A 1.01 1.02 1.01
PV9*C20 G4FA048S21T2A 1.01 1.02 1.01
PV8*C16 G4FD042H21T2A 1.02 1.02 0.97
PV8*C20 G4FD042H21T2A 1.02 1.02 0.97
PV9*C16 G4FD042H21T2A 1.01 1.02 1.01
PV9*C20 G4FD042H21T2A 1.01 1.02 1.01
PV8*B16 G4FD046H17T2A 1.01 1.02 0.97
PV9*B12 G4FD046H17T2A 1.01 1.01 1.01
PV8*C16 G4FD048H21T2A 1.02 1.02 0.97
PV8*C20 G4FD048H21T2A 1.02 1.02 0.97
PV9*C16 G4FD048H21T2A 1.01 1.02 0.97
PV9*C20 G4FD048H21T2A 1.01 1.02 0.97
PV9*D20 G4FD048H24T2A 1.01 1.02 0.97
PV8*C16 HC48 1.02 1.02 0.97
PV8*C20 HC48 1.02 1.02 0.97
PV9*C16 HC48 1.01 1.02 1.01

Subject to change without notice. Printed in U.S.A. 246814-YTG-D-0606
Copyright © by York International Corp. 2006. All rights reserved. Supersedes: 246814-YTG-C-0506
Unitary 5005 Norman
Product York OK
Group Drive 73069
NOTES