York LATITUDE Series Quick start guide

TECHNICAL GUIDE
LATITUDE™ SERIES
SPLIT-SYSTEM AIR CONDITIONERS
14.5 SEER – R-410A – 1 PHASE
1.5 THRU 5 NOMINAL TONS
MODELS: TCGF18 THRU 60
Due to continuous product improvement, specifications are
subject to change without notice.
Visit us on the web at
www.upgnet.com and www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Standard 5-Years limited parts warranty.
Standard 10-Years limited compressor warranty.
Extended 10-Years limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.
®
700699-YTG-B-0812
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 14.5 SEER Series unit is the outdoor part of a versatile cli-
mate system. It is designed with a matching indoor coil compo-
nent from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with acces-
sories and documents to serve specific functions.
FEATURES
•Small Footprint - Extremely lightweight with a compact foot-
print, it is a perfect fit for any application.
•Quality Condenser Coils - The coil is constructed of alumi-
num microchannel tubing and enhanced aluminum fins for
reduced size and increased efficiency.
•Coil Protection - Coils are protected from damage by a
sturdy polymer mesh and a coated steel wire coil guard.
•Optional Factory E-Coat - Available ElectroFin® coated coil
on select models.
•Protected Compressor - Compressors are protected inter-
nally by a high pressure relief valve and a temperature sen-
sor, and externally by the system high pressure switch. A
factory installed liquid line filter-drier further protects the com-
pressor against moisture and debris.
•Environmentally Friendly Refrigerant - The next genera-
tion refrigerant R-410A delivers environmentally friendly per-
formance with zero ozone depletion.
•Durable Finish - The cabinet is made of G90-equivalent pre-
painted steel, with special primer formulas and matte cham-
pagne texture to insure less fading when exposed to sun-
light. The coated steel wire fan and coil guards and pre-
treated, galvanized steel chassis components resist corro-
sion and rust creep.
•Lower Installed Cost - Installation time and costs are
reduced by easy power and control wiring connections. The
unit is factory charged for a 15-foot lineset. The small base
dimension means less space is required on the ground or
roof.
•Top Discharge - Warm air from the top mounted fan is blown
up, away from the structure and any landscaping. This allows
compact location on multi-unit applications.
•Competitive Sound Levels - The upward air flow carries the
normal operating noise away from the living area. The rigid
top panel effectively isolates any motor sound. Isolator
mounted compressor and the condenser coil muffle the nor-
mal fan motor and compressor operating sounds.
•Low Maintenance - Long life, permanently lubricated motor-
bearings need no annual servicing.
•Easy Service Access - Fully exposed refrigerant connec-
tions and a single panel covering the electrical controls make
for easy servicing of the unit.
•Secured Service Valves - Secured, re-usable service
valves are provided on both the liquid and vapor sweat con-
nections for ease of evacuating and charging.
•Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.

700699-YTG-B-0812
2Johnson Controls Unitary Products
All dimensions are in inches and are subject to change without notice.
Overall height is from bottom of base pan to top of fan guard.
Overall length and width include screw heads.
Physical and Electrical Data
MODEL TCGF18
S41S3(E) TCGF24 S41S3(E) TCGF30 S41S3(E) TCGF36 S41S3(E) TCGF42 S41S3(E) TCGF48 S41S4(E) TCGF60 S41S4(E)
Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range 1187 to 252
Minimum Circuit Ampacity 12.0 16.8 18.4 19.1 23.9 26.3 32.7
Max. Overcurrent Device Amps 220 25 30 30 40 45 50
Min. Overcurrent Device Amps 315 20 20 20 25 30 35
Compressor Type Scroll Scroll Scroll Scroll Scroll Scroll Scroll
Compressor
Amps Rated Load 9.0 12.8 14.1 14.1 17.9 19.9 25.0
Locked Rotor 46 58 73 77 112 109 134
Crankcase Heater No No No No No No No
FactoryExternalDischargeMufflerNoNoNoNoNoNoNo
FactoryExternalCheckValveNoNoNoNoNoNoNo
HS Kit Required with TXV 4No No No No No No No
Fan Motor Amps Rated Load 0.8 0.8 0.8 1.5 1.5 1.5 1.5
Fan Diameter Inches 22 22 22 22 24 24 24
Fan Motor Rated HP 1/8 1/8 1/8 1/4 1/4 1/4 1/4 Nominal RPM 1075 1075 1075 850 850 850 850
Nominal CFM 2750 2750 2800 3200 3600 3700 3750
Coil Face Area Sq. Ft. 13.1 13.1 17.4 17.4 20.0 21.4 24.0 Rows Deep 1 1 1 1 1 1 1
Fins / Inch 23 23 23 23 23 23 23
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 3/4 7/8 7/8 7/8
Unit Charge (Lbs. - Oz.) 53 - 10 3 - 2 3 - 7 3 - 10 4 - 4 5 - 1 5 - 4
Charge Per Foot, Oz. 0.62 0.62 0.62 0.62 0.67 0.67 0.67
Operating Weight Lbs. 125 128 130 145 172 208 231
Models with “E” on the end of the model number have an ElectroFin® coating on the outdoor coil.
1. Rated in accordance with AHRI Standard 110-2012, utilization range “A”.
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
5. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract
the amount of refrigerant, using the difference in length multiplied by the per foot value.
B
A
C
Unit
Model
Dimensions
(Inches) Refrigerant Connection Service Valve Size
A B C Liquid Vapor
18 28-1/4 29-1/2 29-1/2
3/8
3/4
24 28-1/4 29-1/2 29-1/2
30 36-1/4 29-1/2 29-1/2
36 36-1/4 29-1/2 29-1/2
42 34-1/4 34 34 7/848 36-1/4 34 34
60 40-1/4 34 34

700699-YTG-B-0812
Johnson Controls Unitary Products 3
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing.
2. Verify the TXV and additional charge required for specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit +
charge adder for line set.
System Charge for Various Matched Systems
Outdoor Unit TCGF18
S41S3(E) TCGF24 S41S3(E) TCGF30 S41S3(E) TCGF36 S41S3(E) TCGF42 S41S3(E) TCGF48 S41S4(E) TCGF60 S41S4(E)
Required TXV 1,24F1 4F1 4G1 4G1 4G1 4J1 4J1
Indoor Unit 3,4,5 Additional Charge, oz
AHE18B 0––––––
AHE24B 1516–––––
AHE30B 151613––––
AHE36C 24 23 19 15 – – –
AHE42D – 35302517 – –
AHE48D – – – 24 16 11 –
AHE60D – – – 29221513
AHR18B 0––––––
AHR24B –16–––––
AHR30B ––12––––
AHR36B – – 19 15 – – –
AHR42C – – – 25 17 – –
AHR48D – – – – 16 11 –
AHR60D – – – – 22 15 13
AHV18B 0––––––
AHV24B 1516–––––
AHV30B 151613––––
AHV36C 23 22 19 15 – – –
AHV42D – – 31 25 17 – –
AHV48D – – – 24 16 11 –
AHV60D – – – – 21 15 13
AV*24 3––––––
AV*36 23231915 –––
AV*48 – – – 24 18 11 –
AV*60 ––––
18 11 9
FC/MC/PC18 0––––––
FC/MC/PC32 15 16 13 – –––
FC/MC/PC35 15 16 13 – –––
FC/MC/PC37 23 22 19 15 –––
FC/MC/PC43 23 22 19 15 8––
FC/MC/PC48 – 34302517 9 –
FC/MC/PC60 – – – 24 16 11 9
FC/MC62 – – – 29 21 15 13
FC64 – – – 39 30 26 21
HD24 14 – – – –––
HD36 19 19 16 – –––
HD48 – 45 40 34 26 – –
HD60 – – – – 22 8 6
UC18 2 – – – –––
UC48 – – – – 11 10 –
UC60 – – – 24 16 13 11
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:
1. For applications requiring a TXV use S1-1TVM*** series kit.
2. A TXV kit must be used with these indoor units to obtain system performance.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
5. Refer to Cooling Performance Data tables for actual system performance for specified system matches.

700699-YTG-B-0812
4Johnson Controls Unitary Products
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH AIR HANDLERS
TCGF18S41S3(E)
AHE18B 17.5 – 610 17.9 13.0 16.25 13.25
AHE24B 17.5 – 585 18.1 13.1 16.75 13.50
AHE30B 17.5 – 585 18.1 13.1 16.75 13.50
AHE36C 21.0 – 730 19.2 15.0 17.50 14.25
AHR18B 17.5 – 665 17.7 13.1 14.25 12.00
AHV18B 17.5 – 615 17.6 12.8 16.00 13.00
AHV24B 17.5 – 580 17.8 12.9 16.50 13.25
AHV30B 17.5 – 700 18.0 13.8 16.50 13.25
AHV36C 21.0 – 670 18.2 13.7 17.00 13.75
AV*24 17.5 – 610 18.1 13.2 16.50 13.50
AV*36 21.0 – 630 18.7 13.8 17.50 14.00
MV12B 17.5 FC/MC18B 600 17.9 12.7 16.25 13.25
MV12B 17.5 FC/MC35B 600 18.2 13.1 16.50 13.25
MV12B 17.5 FC/MC43B 600 18.4 13.2 16.75 13.50
MX12B 17.5 FC/MC18B 585 17.9 12.8 16.50 13.50
MX12B 17.5 FC/MC35B 660 18.6 14.1 17.50 14.25
MX12B 17.5 FC/MC43B 620 18.5 13.3 17.50 14.00
TCGF24S41S3(E)
AHE24B 17.5 – 795 25.2 18.7 16.25 13.50
AHE30B 17.5 – 795 25.2 18.7 16.25 13.50
AHE36C 21.0 – 855 26.2 19.7 17.00 14.25
AHE42D 24.5 – 820 26.4 19.5 17.25 14.50
AHR24B 17.5 – 740 24.8 17.7 15.00 12.75
AHV24B 17.5 – 710 24.0 17.0 15.75 13.25
AHV30B 17.5 – 775 24.2 17.5 15.75 13.25
AHV36C 21.0 – 760 24.4 17.7 16.25 13.50
AV*36 21.0 – 725 25.8 18.6 16.50 13.75
MV12B 17.5 FC/MC35B 800 25.6 18.0 16.00 13.50
MV12B 17.5 FC/MC43B 800 25.8 18.4 16.10 13.75
MV12D 24.5 FC/MC48D 845 26.4 19.8 17.25 14.50
MV16C 21.0 FC/MC35C 800 25.6 18.0 16.00 13.50
MV16C 21.0 FC/MC43C 800 25.8 18.4 16.10 13.75
MV16C 21.0 FC/MC48C 800 26.2 18.7 16.50 14.00
MX12B 17.5 FC/MC35B 815 25.6 18.8 17.00 14.25
MX12B 17.5 FC/MC43B 735 25.6 18.4 16.75 14.00
TCGF30S41S3(E)
AHE30B 17.5 – 985 29.6 21.1 15.50 13.00
AHE36C 21.0 – 1000 30.4 21.9 16.25 13.75
AHE42D 24.5 – 1000 30.8 22.3 16.75 14.00
AHR30B 17.5 – 1115 29.8 21.9 14.25 12.00
AHR36B 17.5 – 1060 30.0 21.7 14.50 12.25
AHV30B 17.5 – 1000 29.0 20.7 14.75 12.50
AHV36C 21.0 – 895 29.4 20.5 16.00 13.25
AHV42D 24.5 – 1080 30.0 22.2 16.25 13.50
AV*36 21.0 – 960 30.4 22.7 16.25 13.50
MV12B 17.5 FC/MC35B 1000 29.6 21.4 15.25 13.00
MV12B 17.5 FC/MC43B 1000 30.2 22.0 15.75 13.25
MV16C 21.0 FC/MC35C 1000 29.6 21.4 15.50 13.25
MV16C 21.0 FC/MC43C 1000 30.2 22.0 16.00 13.50
MV16C 21.0 FC/MC48C 1000 30.6 22.2 16.00 13.50
MV20D 24.5 FC/MC48D 1000 30.6 22.2 16.00 13.50
MX12B 17.5 FC/MC35B 1085 30.4 22.1 16.00 13.25
For notes see Page 6.

700699-YTG-B-0812
Johnson Controls Unitary Products 5
TCGF30S41S3(E)
MX12B 17.5 FC/MC43B 1095 30.8 22.7 16.25 13.50
MX16C 21.0 FC/MC35C 1035 30.2 21.7 16.50 13.75
MX16C 21.0 FC/MC43C 970 30.4 22.1 16.75 14.00
MX16C 21.0 FC/MC48C 995 30.8 22.3 17.00 14.25
TCGF36S41S3(E)
AHE36C 21.0 – 1190 35.0 26.0 16.00 13.50
AHE42D 24.5 – 1180 35.2 26.4 16.50 13.75
AHE48D 24.5 – 1195 35.0 26.2 16.50 13.75
AHE60D 24.5 – 1190 35.4 26.6 16.75 14.00
AHR36B 17.5 – 1245 34.2 25.2 14.25 12.00
AHR42C 21.0 – 1230 34.8 26.2 14.75 12.50
AHV36C 21.0 – 1215 34.4 25.8 15.50 12.75
AHV42D 24.5 – 1180 34.8 26.1 16.25 13.25
AHV48D 24.5 – 1155 34.2 25.5 16.25 13.25
AV*36 21.0 – 1190 35.2 25.7 15.75 13.20
AV*48 24.5 – 1220 33.6 24.8 15.25 13.00
MV12B 17.5 FC/MC43B 1200 34.8 25.6 15.50 13.00
MV12D 24.5 FC/MC48D 1160 35.2 25.8 16.00 13.25
MV12D 24.5 FC/MC60D 1135 34.6 25.4 16.00 13.25
MV12D 24.5 FC/MC62D 1155 35.4 26.6 16.75 14.00
MV12D 24.5 FC64D 1155 36.0 27.0 17.00 13.50
MV16C 21.0 FC/MC43C 1200 35.0 25.8 16.00 13.25
MV16C 21.0 FC/MC48C 1200 35.4 26.4 16.25 13.25
MV20D 24.5 FC/MC48D 1300 35.8 27.6 16.50 14.00
MV20D 24.5 FC/MC60D 1300 35.2 27.2 16.25 13.50
MV20D 24.5 FC/MC62D 1300 35.6 27.6 16.50 13.75
MV20D 24.5 FC64D 1300 36.0 27.0 16.50 13.50
MX12B 17.5 FC/MC43B 1220 35.0 26.2 15.50 13.00
MX12D 24.5 FC/MC48D 1225 35.4 26.8 16.25 13.50
MX12D 24.5 FC/MC60D 1275 35.2 26.8 16.25 13.50
MX12D 24.5 FC/MC62D 1270 35.8 27.4 16.75 14.00
MX12D 24.5 FC64D 1270 36.8 28.6 17.25 14.50
MX16C 21.0 FC/MC43C 1140 34.8 25.8 16.50 13.75
MX16C 21.0 FC/MC48C 1150 35.2 26.4 16.75 14.00
MX20D 24.5 FC/MC60D 1295 35.4 27.4 16.75 14.00
MX20D 24.5 FC/MC62D 1260 35.6 27.4 16.75 14.00
MX20D 24.5 FC64D 1260 36.8 28.6 17.25 14.50
TCGF42S41S3(E)
AHE42D 24.5 – 1385 41.5 31.0 16.00 13.25
AHE48D 24.5 – 1385 40.5 30.6 16.00 13.00
AHE60D 24.5 – 1390 41.5 31.4 16.25 13.25
AHR42C 21.0 – 1485 41.0 31.2 14.75 12.00
AHR48D 24.5 – 1320 39.5 29.2 14.25 11.75
AHR60D 24.5 – 1350 40.5 30.2 14.75 12.25
AHV42D 24.5 – 1385 40.0 30.2 15.00 12.50
AHV48D 24.5 – 1300 40.5 29.8 15.25 12.75
AHV60D 24.5 – 1340 41.0 30.8 15.25 12.75
AV*48 24.5 – 1385 40.0 29.8 14.75 12.50
AV*60 24.5 – 1360 40.0 29.8 14.75 12.50
MV12D 24.5 FC64D 1155 42.0 30.4 16.00 13.00
MV16C 21.0 FC/MC43C 1400 41.0 30.8 15.00 12.75
MV16C 21.0 FC/MC48C 1400 41.5 31.2 15.50 13.00
For notes see Page 6.
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH AIR HANDLERS

700699-YTG-B-0812
6Johnson Controls Unitary Products
— = Not applicable.
MA Modular Air Handlers use Coil Only Ratings.
TCGF42S41S3(E)
MV16C 21.0 FC60C 1400 40.5 30.6 15.50 12.75
MV20D 24.5 FC/MC48D 1400 42.0 31.4 15.50 13.00
MV20D 24.5 FC/MC60D 1400 41.5 31.4 15.50 13.00
MV20D 24.5 FC/MC62D 1400 42.0 31.4 16.00 13.00
MV20D 24.5 FC64D 1300 42.0 31.4 16.50 13.50
MX16C 21.0 FC/MC43C 1365 41.0 30.6 16.00 13.25
MX16C 21.0 FC/MC48C 1390 41.5 31.2 16.25 13.25
MX16C 21.0 FC60C 1420 40.5 30.8 16.00 13.00
MX20D 24.5 FC/MC48D 1415 41.5 31.2 16.00 13.25
MX20D 24.5 FC/MC60D 1470 41.0 31.6 16.25 13.25
MX20D 24.5 FC/MC62D 1470 41.5 32.2 16.25 13.50
MX20D 24.5 FC64D 1470 43.0 33.4 16.75 13.75
TCGF48S41S4(E)
AHE48D 24.5 – 1600 46.0 32.6 15.25 12.50
AHE60D 24.5 – 1565 46.5 33.2 15.75 13.00
AHR48D 24.5 – 1610 45.5 32.0 14.25 11.75
AHR60D 24.5 – 1620 46.5 33.0 14.50 12.25
AHV48D 24.5 – 1585 45.5 31.9 14.75 12.25
AHV60D 24.5 – 1570 46.0 32.4 15.00 12.50
AV*48 24.5 – 1625 46.0 32.4 15.00 12.50
AV*60 24.5 – 1560 46.0 32.6 15.25 12.50
MV16C 21.0 FC/MC48C 1625 45.0 33.2 15.00 12.25
MV16C 21.0 FC60C 1625 46.0 32.2 15.00 12.50
MV20D 24.5 FC/MC48D 1620 45.5 33.4 15.50 12.50
MV20D 24.5 FC/MC60D 1600 46.0 32.2 15.00 12.25
MV20D 24.5 FC/MC62D 1630 47.0 33.8 15.50 12.75
MV20D 24.5 FC64D 1630 47.5 34.2 16.00 13.00
MX16C 21.0 FC/MC48C 1685 45.5 34.0 15.25 12.25
MX16C 21.0 FC60C 1420 45.5 31.0 15.75 13.00
MX20D 24.5 FC/MC48D 1525 45.5 33.4 15.50 12.75
MX20D 24.5 FC/MC60D 1470 45.5 31.2 16.00 13.00
MX20D 24.5 FC/MC62D 1605 47.0 34.0 16.00 13.25
MX20D 24.5 FC64D 1605 47.5 34.4 16.50 13.50
TCGF60S41S4(E)
AHE60D 24.5 – 1835 56.5 39.6 14.50 12.50
AHR60D 24.5 – 1870 56.0 39.1 13.75 11.75
AHV60D 24.5 – 1635 55.5 37.4 14.25 12.00
AV*60 24.5 – 1730 55.5 37.4 14.50 12.00
MV20D 24.5 FC/MC60D 1845 56.0 38.1 14.50 12.25
MV20D 24.5 FC/MC62D 1855 56.5 39.6 14.25 12.25
MV20D 24.5 FC64D 1855 57.5 40.5 14.50 12.50
MX20D 24.5 FC/MC60D 1780 55.5 37.4 14.50 12.50
MX20D 24.5 FC/MC62D 1795 57.0 39.6 15.00 12.75
MX20D 24.5 FC64D 1795 57.5 41.0 15.25 13.00
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in
watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH AIR HANDLERS

700699-YTG-B-0812
Johnson Controls Unitary Products 7
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT MODEL COIL CFM RANGE
(MIN.-MAX.)
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER 1EER
TOTAL SENS.
14.5 SEER AC COIL ONLY RATINGS
TCGF18S41S3(E)
FC/MC/PC18 14.5,17.5 450-750 600 17.3 12.4 14.00 11.50
FC/MC/PC32 14.5 450-750 600 17.8 12.8 14.50 12.00
FC/MC/PC35 17.5,21.0 450-750 600 17.8 12.8 14.50 12.00
FC/MC/PC37 14.5 450-750 600 18.0 12.9 14.75 12.00
FC/MC/PC43 17.5,21.0 450-750 600 18.0 12.9 14.75 12.00
HD24 – 450-750 600 17.9 12.8 14.50 12.00
HD36 – 450-750 600 17.3 11.9 14.00 11.50
UC18 14.5,17.5 450-750 600 17.4 12.5 14.00 11.75
TCGF24S41S3(E)
FC/MC/PC32 14.5 500-900 700 24.4 17.2 14.50 12.30
FC/MC/PC35 17.5,21.0 500-900 800 25.0 17.6 14.50 12.35
FC/MC/PC37 14.5 500-900 800 25.4 17.9 14.50 12.35
FC/MC/PC43 17.5,21.0 500-900 800 25.2 18.0 14.70 12.50
FC/MC/PC48 21.0,24.5 500-900 800 25.6 18.3 14.80 12.65
HD36 – 500-900 800 24.8 17.0 14.00 12.00
HD48 – 500-900 800 25.6 17.9 14.50 12.35
TCGF30S41S3(E)
FC/MC/PC32 14.5 800-1200 1000 29.0 21.0 14.00 12.00
FC/MC/PC35 17.5,21.0 800-1200 1000 29.0 21.0 14.00 12.00
FC/MC/PC37 14.5 800-1200 1000 29.6 21.6 14.50 12.35
FC/MC/PC43 17.5,21.0 800-1200 1000 29.6 21.8 14.50 12.30
FC/MC/PC48 21.0,24.5 800-1200 1000 30.0 21.8 14.50 12.35
HD36 – 800-1200 1000 28.8 20.2 14.00 12.00
HD48 – 800-1200 1000 29.8 21.4 14.50 12.35
TCGF36S41S3(E)
FC/MC/PC37 14.5 1000-1400 1200 34.4 25.2 14.50 12.20
FC/MC/PC43 17.5,21.0 1000-1400 1200 34.2 25.0 14.50 12.30
FC/MC/PC48 21.0,24.5 1000-1400 1200 34.6 25.4 14.50 12.25
FC/MC/PC60 21.0,24.5 1000-1400 1200 34.0 25.4 14.25 12.00
FC/MC62 24.5 1000-1400 1200 34.4 25.8 14.50 12.25
FC64 24.5 1000-1400 1200 35.6 26.8 14.75 12.50
HD48 – 1000-1400 1200 34.6 25.0 14.50 12.20
UC60 21.0,24.5 1000-1400 1200 33.2 23.8 14.00 11.75
TCGF42S41S3(E)
FC/MC/PC43 17.5,21.0 1200-1600 1400 40.5 30.4 14.00 12.00
FC/MC/PC48 21.0,24.5 1200-1600 1400 40.5 30.4 14.50 12.00
FC/MC/PC60 21.0,24.5 1200-1600 1400 41.0 30.8 14.50 12.30
FC/MC62 24.5 1200-1600 1400 41.0 31.0 14.50 12.30
FC64 24.5 1200-1600 1400 41.5 32.0 14.75 12.25
HD48 – 1200-1600 1400 41.0 30.4 14.25 12.10
HD60 – 1200-1600 1400 41.5 31.2 14.50 12.30
TCGF48S41S4(E)
FC/MC/PC48 21.0,24.5 1400 - 1800 1600 44.5 32.8 14.25 11.75
FC/MC/PC60 21.0,24.5 1400 - 1800 1600 45.5 31.8 14.25 11.75
FC/MC62 24.5 1400 - 1800 1600 46.0 32.8 14.50 12.00
FC64 24.5 1400 - 1800 1600 46.5 33.8 14.75 12.25
HD60 – 1400 - 1800 1600 46.5 32.4 14.50 12.00
UC48 21.0,24.5 1400 - 1800 1600 44.5 32.8 14.25 11.75
UC60 21.0,24.5 1400 - 1800 1600 45.0 31.8 14.25 11.75
TCGF60S41S4(E)
FC/MC/PC60 21.0,24.5 1600 - 2000 1800 54.5 36.8 13.50 11.75
FC/MC62 24.5 1600 - 2000 1800 56.0 38.6 14.00 12.00
FC64 24.5 1600 - 2000 1800 57.0 40.5 14.25 12.25
HD60 – 1600 - 2000 1800 56.5 38.1 14.00 12.00
UC60 21.0,24.5 1600 - 2000 1800 55.0 37.4 13.75 11.75
1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
MA Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9s, use Coil Only Ratings.

700699-YTG-B-0812
8Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2
TCGF18S41S3(E)
T*(8,L)V*A12 14.5 FC/MC/PC18A 615 17.8 12.7 16.00 13.00
T*(8,L)V*A12 14.5 FC/MC/PC32A 620 18.2 13.1 16.50 13.25
T*(8,L)V*A12 14.5 FC/MC/PC37A 635 18.6 13.8 17.00 13.75
T*(8,L)V*A12 14.5 HD24 640 18.6 13.7 17.00 13.75
T*(8,L)V*A12 14.5 HD36 645 18.0 12.8 16.25 13.25
T*(8,L)V*A12 14.5 UC18A 620 17.9 12.8 16.25 13.25
T*(8,L)V*B12 17.5 FC/MC/PC18B 625 17.8 12.7 16.00 13.00
T*(8,L)V*B12 17.5 FC/MC/PC35B 630 18.4 13.6 16.75 13.50
T*(8,L)V*B12 17.5 FC/MC/PC43B 570 18.2 13.0 16.75 13.50
T*(8,L)V*B12 17.5 HD24 575 18.5 13.2 17.25 14.00
T*(8,L)V*B12 17.5 HD36 650 18.1 12.9 16.50 13.25
T*(8,L)V*B12 17.5 UC18B 580 17.9 12.9 16.25 13.25
T*(8,L)V*C16 21.0 FC/MC/PC35C 645 18.4 13.8 17.00 13.50
T*(8,L)V*C16 21.0 HD24 600 18.4 13.1 17.25 13.75
T*(8,L)V*C16 21.0 HD36 595 17.8 12.3 16.50 13.25
T*(8,L)X*A12 14.5 FC/MC/PC18A 540 17.5 12.3 16.00 13.25
T*(8,L)X*A12 14.5 FC/MC/PC32A 590 18.4 13.2 17.25 14.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 640 18.8 14.0 17.50 14.25
T*(8,L)X*A12 14.5 HD24 605 18.5 13.2 17.50 14.00
T*(8,L)X*A12 14.5 HD36 605 17.9 12.3 16.75 13.50
T*(8,L)X*A12 14.5 UC18A 590 18.0 12.9 16.75 13.50
T*(8,L)X*B12 17.5 FC/MC/PC18B 580 17.9 12.8 16.50 13.50
T*(8,L)X*B12 17.5 FC/MC/PC35B 640 18.4 13.8 17.50 14.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 665 19.0 14.3 17.50 14.50
T*(8,L)X*B12 17.5 HD24 655 18.8 14.0 17.50 14.25
T*(8,L)X*B12 17.5 HD36 650 18.2 13.0 17.00 13.75
T*(8,L)X*B12 17.5 UC18B 595 18.0 12.9 16.75 13.50
T*(8,L)X*C16 21.0 FC/MC/PC35C 625 18.3 13.2 16.75 13.75
T*(8,L)X*C16 21.0 HD24 650 18.7 13.8 17.25 14.00
T*9V*A10 14.5 FC/MC/PC18A 580 17.7 12.5 15.25 12.75
T*9V*A10 14.5 FC/MC/PC32A 580 18.0 13.0 16.25 13.00
T*9V*A10 14.5 FC/MC/PC37A 570 18.2 13.0 16.25 13.25
T*9(C,V)*B12 17.5 FC/MC/PC18B 610 17.9 12.7 16.25 13.25
T*9(C,V)*B12 17.5 FC/MC/PC35B 570 18.0 12.9 16.50 13.50
T*9(C,V)*B12 17.5 HD24 610 18.4 13.1 17.00 13.75
T*9(C,V)*B12 17.5 HD36 635 18.0 12.8 16.50 13.25
T*9(C,V)*B12 17.5 UC18B 610 17.9 12.9 16.50 13.50
T*9(C,V)*C16 21.0 FC/MC/PC35C 645 18.4 13.8 17.00 13.75
T*9(C,V)*C16 21.0 HD36 595 17.8 12.3 16.50 13.25
T*9X*A10 14.5 FC/MC/PC18A 575 17.7 12.5 15.50 13.00
T*9X*A10 14.5 FC/MC/PC32A 585 18.1 13.0 16.25 13.25
T*9X*A10 14.5 FC/MC/PC37A 580 18.2 13.1 16.50 13.25
T*9X*B12 17.5 FC/MC/PC18B 590 17.9 12.8 16.50 13.50
T*9X*B12 17.5 FC/MC/PC35B 645 18.5 13.9 17.50 14.00
T*9X*B12 17.5 HD24 630 18.7 13.7 17.50 14.25
T*9X*B12 17.5 HD36 630 18.1 12.8 16.75 13.75
T*9X*B12 17.5 UC18B 590 18.0 12.9 16.75 13.50
Y*(8,L)C*A12 14.5 FC/MC/PC18A 615 17.8 12.7 16.00 13.00
Y*(8,L)C*A12 14.5 FC/MC/PC32A 620 18.2 13.1 16.50 13.25
Y*(8,L)C*A12 14.5 FC/MC/PC37A 635 18.6 13.8 17.00 13.75
For notes see Page 19.

700699-YTG-B-0812
Johnson Controls Unitary Products 9
TCGF18S41S3(E)
Y*(8,L)C*A12 14.5 HD24 640 18.6 13.7 17.00 13.75
Y*(8,L)C*A12 14.5 HD36 645 18.0 12.8 16.25 13.25
Y*(8,L)C*A12 14.5 UC18A 620 17.9 12.8 16.25 13.25
Y*(8,L)C*B12 17.5 FC/MC/PC18B 625 17.8 12.7 16.00 13.00
Y*(8,L)C*B12 17.5 FC/MC/PC35B 630 18.4 13.6 16.75 13.50
Y*(8,L)C*B12 17.5 FC/MC/PC43B 570 18.2 13.0 16.75 13.50
Y*(8,L)C*B12 17.5 HD24 575 18.5 13.2 17.25 14.00
Y*(8,L)C*B12 17.5 HD36 650 18.1 12.9 16.50 13.25
Y*(8,L)C*B12 17.5 UC18B 580 17.9 12.9 16.25 13.25
Y*(8,L)C*C16 21.0 FC/MC/PC35C 645 18.4 13.8 17.00 13.50
Y*(8,L)C*C16 21.0 HD24 600 18.4 13.1 17.25 13.75
Y*(8,L)C*C16 21.0 HD36 595 17.8 12.3 16.50 13.25
Y*9C*B12 17.5 FC/MC/PC18B 610 17.9 12.7 16.25 13.25
Y*9C*B12 17.5 FC/MC/PC35B 570 18.0 12.9 16.50 13.50
Y*9C*B12 17.5 HD24 610 18.4 13.1 17.00 13.75
Y*9C*B12 17.5 HD36 635 18.0 12.8 16.50 13.25
Y*9C*B12 17.5 UC18B 610 17.9 12.9 16.50 13.50
Y*9C*C16 21.0 FC/MC/PC35C 645 18.4 13.8 17.00 13.75
Y*9C*C16 21.0 HD36 595 17.8 12.3 16.50 13.25
TCGF24S41S3(E)
T*(8,L)V*A12 14.5 FC/MC/PC32A 775 24.0 16.8 15.50 13.25
T*(8,L)V*A12 14.5 FC/MC/PC37A 805 24.0 16.9 16.00 13.50
T*(8,L)V*A12 14.5 HD36 805 24.0 16.4 16.00 13.50
T*(8,L)V*B12 17.5 FC/MC/PC35B 760 24.0 16.8 15.75 13.25
T*(8,L)V*B12 17.5 FC/MC/PC43B 760 24.0 16.7 16.00 13.50
T*(8,L)V*B12 17.5 HD36 760 24.0 16.2 15.75 13.25
T*(8,L)V*C16 21.0 HD36 855 24.0 16.7 16.00 13.50
T*(8,L)V*C20 21.0 HD36 750 24.0 16.1 15.75 13.25
T*(8,L)X*A12 14.5 FC/MC/PC32A 800 25.8 19.1 15.75 13.25
T*(8,L)X*A12 14.5 FC/MC/PC37A 840 26.4 20.0 16.00 13.50
T*(8,L)X*A12 14.5 HD36 775 20.8 17.4 15.25 13.00
T*(8,L)X*B12 17.5 FC/MC/PC35B 850 26.0 19.3 15.75 13.25
T*(8,L)X*B12 17.5 FC/MC/PC43B 865 26.6 20.2 16.00 13.50
T*(8,L)X*B12 17.5 HD36 855 25.8 19.1 15.50 13.25
T*(8,L)X*C16 21.0 FC/MC/PC35C 625 24.6 17.2 15.75 13.25
T*(8,L)X*C16 21.0 FC/MC/PC43C 655 25.2 17.9 16.00 13.50
T*(8,L)X*C16 21.0 FC/MC/PC48C 685 25.6 18.4 15.75 13.25
T*(8,L)X*C20 21.0 FC/MC/PC35C 885 26.2 20.0 15.75 13.50
T*9V*A10 14.5 FC/MC/PC32A 785 25.0 18.2 15.25 12.75
T*9V*A10 14.5 FC/MC/PC37A 790 25.4 18.6 15.50 13.00
T*9(C,V)*B12 17.5 FC/MC/PC35B 815 24.0 17.0 15.75 13.25
T*9(C,V)*B12 17.5 FC/MC/PC43B 800 24.0 16.8 16.00 13.50
T*9(C,V)*B12 17.5 HD36 815 24.0 16.4 15.75 13.25
T*9(C,V)*C16 21.0 FC/MC/PC35C 875 25.2 17.6 16.00 13.00
T*9(C,V)*C16 21.0 HD36 785 24.0 16.4 16.00 13.50
T*9(C,V)*C20 21.0 HD36 760 24.0 16.1 15.75 13.25
T*9X*A10 14.5 FC/MC/PC32A 745 25.0 17.9 15.50 13.00
T*9X*A10 14.5 FC/MC/PC37A 740 25.2 18.2 15.75 13.25
T*9X*B12 17.5 FC/MC/PC35B 785 25.8 19.3 15.75 13.25
T*9X*B12 17.5 FC/MC/PC43B 800 26.2 19.5 16.00 13.50
T*9X*B12 17.5 HD36 790 25.4 18.3 15.25 13.00
T*9X*C16 21.0 FC/MC/PC35C 715 25.2 18.3 15.75 13.25
For notes see Page 19.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
10 Johnson Controls Unitary Products
TCGF24S41S3(E)
T*9X*C16 21.0 FC/MC/PC43C 735 25.8 18.8 16.00 13.50
T*9X*C16 21.0 FC/MC/PC48C 770 26.2 19.5 15.75 13.25
T*9X*C20 21.0 FC/MC/PC35C 825 25.8 19.2 15.75 13.50
T*9X*C20 21.0 FC/MC/PC43C 790 26.2 19.4 15.75 13.25
T*9X*C20 21.0 FC/MC/PC48C 815 26.8 20.2 15.75 13.25
Y*(8,L)C*A12 14.5 FC/MC/PC32A 775 24.0 16.8 15.50 13.25
Y*(8,L)C*A12 14.5 FC/MC/PC37A 805 24.0 16.9 16.00 13.50
Y*(8,L)C*A12 14.5 HD36 805 24.0 16.4 16.00 13.50
Y*(8,L)C*B12 17.5 FC/MC/PC35B 760 24.0 16.8 15.75 13.25
Y*(8,L)C*B12 17.5 FC/MC/PC43B 760 24.0 16.7 16.00 13.50
Y*(8,L)C*B12 17.5 HD36 760 24.0 16.2 15.75 13.25
Y*(8,L)C*C16 21.0 HD36 855 24.0 16.7 16.00 13.50
Y*(8,L)C*C20 21.0 HD36 750 24.0 16.1 15.75 13.25
Y*9C*B12 17.5 FC/MC/PC35B 815 24.0 17.0 15.75 13.25
Y*9C*B12 17.5 FC/MC/PC43B 800 24.0 16.8 16.00 13.50
Y*9C*B12 17.5 HD36 815 24.0 16.4 15.75 13.25
Y*9C*C16 21.0 FC/MC/PC35C 875 25.2 17.6 16.00 13.00
Y*9C*C16 21.0 HD36 785 24.0 16.4 16.00 13.50
Y*9C*C20 21.0 HD36 760 24.0 16.1 15.75 13.25
TCGF30S41S3(E)
T*(8,L)V*A12 14.5 FC/MC/PC32A 1045 29.2 21.6 14.50 12.25
T*(8,L)V*A12 14.5 FC/MC/PC37A 980 29.8 21.6 15.00 12.75
T*(8,L)V*A12 14.5 HD36 1000 29.0 20.6 15.00 12.75
T*(8,L)V*B12 17.5 FC/MC/PC35B 1020 29.2 22.0 15.20 12.85
T*(8,L)V*B12 17.5 FC/MC/PC43B 1045 30.0 22.6 15.70 13.30
T*(8,L)V*B12 17.5 HD36 985 29.2 20.6 15.50 13.00
T*(8,L)V*C16 21.0 FC/MC/PC35C 985 29.4 21.8 15.70 13.25
T*(8,L)V*C16 21.0 FC/MC/PC43C 990 30.0 22.0 16.25 13.50
T*(8,L)V*C16 21.0 FC/MC/PC48C 1010 30.0 22.2 16.50 13.75
T*(8,L)V*C16 21.0 HD36 1020 29.2 20.8 15.75 13.00
T*(8,L)V*C20 21.0 FC/MC/PC35C 1035 29.6 22.0 15.60 13.20
T*(8,L)V*C20 21.0 FC/MC/PC43C 1000 30.0 22.0 16.25 13.75
T*(8,L)V*C20 21.0 FC/MC/PC48C 1040 30.0 22.2 16.50 13.75
T*(8,L)V*C20 21.0 HD36 1055 29.6 21.4 15.75 13.25
T*(8,L)X*A12 14.5 FC/MC/PC32A 970 29.2 21.4 15.25 13.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 1105 30.6 23.4 15.25 13.00
T*(8,L)X*A12 14.5 HD36 1115 29.8 22.8 15.00 12.75
T*(8,L)X*B12 17.5 FC/MC/PC35B 1120 30.0 22.8 15.75 13.25
T*(8,L)X*B12 17.5 FC/MC/PC43B 1125 30.8 23.6 16.00 13.50
T*(8,L)X*B12 17.5 HD36 1120 30.0 23.0 15.50 13.00
T*(8,L)X*C16 21.0 FC/MC/PC35C 1105 30.0 23.0 15.75 13.25
T*(8,L)X*C16 21.0 FC/MC/PC43C 855 28.4 19.7 16.00 13.50
T*(8,L)X*C16 21.0 FC/MC/PC48C 875 29.0 20.2 16.25 13.25
T*(8,L)X*C16 21.0 HD36 1120 30.0 22.6 15.50 13.00
T*(8,L)X*C20 21.0 FC/MC/PC35C 850 29.0 20.8 15.75 13.25
T*(8,L)X*C20 21.0 FC/MC/PC43C 870 29.8 21.4 16.00 13.50
T*(8,L)X*C20 21.0 FC/MC/PC48C 890 30.0 22.0 16.25 13.25
T*9(C,V)*B12 17.5 FC/MC/PC35B 1045 29.4 21.8 15.00 12.50
T*9(C,V)*B12 17.5 FC/MC/PC43B 1035 29.8 21.8 15.25 12.75
T*9(C,V)*B12 17.5 HD36 985 29.2 20.6 15.25 12.75
T*9(C,V)*C16 21.0 FC/MC/PC35C 1005 29.6 22.0 15.75 13.25
T*9(C,V)*C16 21.0 FC/MC/PC43C 1030 30.0 22.0 15.50 13.25
For notes see Page 19.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
Johnson Controls Unitary Products 11
TCGF30S41S3(E)
T*9(C,V)*C16 21.0 FC/MC/PC48C 990 30.0 22.2 16.25 13.50
T*9(C,V)*C16 21.0 HD36 1005 29.2 20.8 15.75 13.25
T*9(C,V)*C20 21.0 FC/MC/PC35C 985 29.6 22.0 15.75 13.25
T*9(C,V)*C20 21.0 FC/MC/PC43C 995 30.0 22.0 16.00 13.50
T*9(C,V)*C20 21.0 FC/MC/PC48C 965 30.0 22.2 16.25 13.50
T*9(C,V)*C20 21.0 HD36 1045 29.2 20.6 15.50 13.00
T*9(C,V)*D20 24.5 FC/MC/PC48D 1085 30.0 22.6 16.25 13.50
T*9X*A10 14.5 FC/MC/PC32A 1035 29.4 21.1 14.00 12.00
T*9X*A10 14.5 FC/MC/PC37A 1025 29.6 21.5 14.25 12.00
T*9X*B12 17.5 FC/MC/PC35B 1085 30.0 22.6 15.00 13.00
T*9X*B12 17.5 FC/MC/PC43B 1095 30.6 23.4 16.00 13.25
T*9X*C16 21.0 FC/MC/PC35C 1075 30.0 22.6 15.00 13.00
T*9X*C16 21.0 FC/MC/PC43C 1055 30.6 23.0 16.00 13.25
T*9X*C16 21.0 FC/MC/PC48C 1075 30.8 23.4 16.00 13.25
T*9X*C20 21.0 FC/MC/PC35C 825 27.4 19.0 14.50 12.30
T*9X*C20 21.0 FC/MC/PC43C 720 28.4 19.6 16.00 13.25
T*9X*C20 21.0 FC/MC/PC48C 745 29.0 20.2 16.00 13.25
T*9X*D20 24.5 FC/MC/PC48D 780 29.2 20.6 16.00 13.25
Y*(8,L)C*A12 14.5 FC/MC/PC32A 1045 29.2 21.6 14.50 12.25
Y*(8,L)C*A12 14.5 FC/MC/PC37A 980 29.8 21.6 15.00 12.75
Y*(8,L)C*A12 14.5 HD36 1000 29.0 20.6 15.00 12.75
Y*(8,L)C*B12 17.5 FC/MC/PC35B 1020 29.2 22.0 15.20 12.85
Y*(8,L)C*B12 17.5 FC/MC/PC43B 1045 30.0 22.6 15.70 13.30
Y*(8,L)C*B12 17.5 HD36 985 29.2 20.6 15.50 13.00
Y*(8,L)C*C16 21.0 FC/MC/PC35C 985 29.4 21.8 15.70 13.25
Y*(8,L)C*C16 21.0 FC/MC/PC43C 990 30.0 22.0 16.25 13.50
Y*(8,L)C*C16 21.0 FC/MC/PC48C 1010 30.0 22.2 16.50 13.75
Y*(8,L)C*C16 21.0 HD36 1020 29.2 20.8 15.75 13.00
Y*(8,L)C*C20 21.0 FC/MC/PC35C 1035 29.6 22.0 15.60 13.20
Y*(8,L)C*C20 21.0 FC/MC/PC43C 1000 30.0 22.0 16.25 13.75
Y*(8,L)C*C20 21.0 FC/MC/PC48C 1040 30.0 22.2 16.50 13.75
Y*(8,L)C*C20 21.0 HD36 1055 29.6 21.4 15.75 13.25
Y*9C*B12 17.5 FC/MC/PC35B 1045 29.4 21.8 15.00 12.50
Y*9C*B12 17.5 FC/MC/PC43B 1035 29.8 21.8 15.25 12.75
Y*9C*B12 17.5 HD36 985 29.2 20.6 15.25 12.75
Y*9C*C16 21.0 FC/MC/PC35C 1005 29.6 22.0 15.75 13.25
Y*9C*C16 21.0 FC/MC/PC43C 1030 30.0 22.0 15.50 13.25
Y*9C*C16 21.0 FC/MC/PC48C 990 30.0 22.2 16.25 13.50
Y*9C*C16 21.0 HD36 1005 29.2 20.8 15.75 13.25
Y*9C*C20 21.0 FC/MC/PC35C 985 29.6 22.0 15.75 13.25
Y*9C*C20 21.0 FC/MC/PC43C 995 30.0 22.0 16.00 13.50
Y*9C*C20 21.0 FC/MC/PC48C 965 30.0 22.2 16.25 13.50
Y*9C*C20 21.0 HD36 1045 29.2 20.6 15.50 13.00
Y*9C*D20 24.5 FC/MC/PC48D 1085 30.0 22.6 16.25 13.50
TCGF36S41S3(E)
T*(8,L)V*A12 14.5 FC/MC/PC37A 1150 34.2 24.8 14.95 12.40
T*(8,L)V*B12 17.5 FC/MC/PC43B 1275 34.8 26.0 14.90 12.50
T*(8,L)V*B12 17.5 HD48 1210 34.8 25.6 15.25 12.50
T*(8,L)V*C16 21.0 FC/MC/PC43C 1205 35.0 25.8 15.75 13.00
T*(8,L)V*C16 21.0 FC/MC/PC48C 1210 35.6 26.2 16.00 13.25
T*(8,L)V*C16 21.0 FC/PC60C 1185 35.0 25.8 16.40 13.45
T*(8,L)V*C16 21.0 HD48 1210 35.2 25.8 16.00 13.25
For notes see Page 19.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
12 Johnson Controls Unitary Products
TCGF36S41S3(E)
T*(8,L)V*C16 21.0 UC60C 1195 34.2 24.6 15.75 13.15
T*(8,L)V*C20 21.0 FC/MC/PC43C 1190 34.6 25.8 15.90 13.10
T*(8,L)V*C20 21.0 FC/MC/PC48C 1155 35.6 26.4 16.25 13.50
T*(8,L)V*C20 21.0 FC/PC60C 1215 35.4 26.0 16.20 13.50
T*(8,L)V*C20 21.0 HD48 1155 35.2 26.0 16.00 13.25
T*(8,L)V*C20 21.0 UC60C 1215 34.2 24.6 15.70 13.10
T*(8,L)X*A12 14.5 FC/MC/PC37A 1290 35.4 26.4 15.25 12.75
T*(8,L)X*B12 17.5 FC/MC/PC43B 1300 35.2 26.6 15.50 13.00
T*(8,L)X*C16 21.0 FC/MC/PC43C 1175 35.2 25.8 15.50 13.00
T*(8,L)X*C16 21.0 FC/MC/PC48C 1185 35.8 26.4 16.25 13.25
T*(8,L)X*C16 21.0 HD48 1120 34.6 25.4 16.00 13.00
T*(8,L)X*C16 21.0 UC60C 1185 34.0 24.6 15.50 12.75
T*(8,L)X*C20 21.0 FC/MC/PC43C 1250 35.4 26.4 15.50 13.00
T*(8,L)X*C20 21.0 FC/MC/PC48C 1270 35.6 26.2 16.25 13.25
T*(8,L)X*C20 21.0 HD48 1245 35.2 26.2 16.00 13.00
T*(8,L)X*C20 21.0 UC60D 1295 34.6 25.8 15.50 12.75
T*9(C,V)*B12 17.5 FC/MC/PC43B 1200 34.6 25.4 14.75 12.25
T*9(C,V)*B12 17.5 HD48 1150 34.8 25.6 15.25 12.50
T*9(C,V)*C16 21.0 FC/MC/PC43C 1240 34.8 25.6 15.25 12.75
T*9(C,V)*C16 21.0 FC/MC/PC48C 1195 35.4 26.2 15.75 13.00
T*9(C,V)*C16 21.0 FC/PC60C 1235 35.0 25.8 15.50 13.00
T*9(C,V)*C16 21.0 HD48 1195 35.0 25.8 15.75 13.00
T*9(C,V)*C16 21.0 UC60C 1235 33.8 24.4 15.00 12.55
T*9(C,V)*C20 21.0 FC/MC/PC43C 1200 35.0 25.6 15.50 13.00
T*9(C,V)*C20 21.0 FC/MC/PC48C 1330 35.8 27.2 15.50 12.75
T*9(C,V)*C20 21.0 FC/PC60C 1330 35.6 27.2 15.65 13.15
T*9(C,V)*C20 21.0 HD48 1325 35.4 26.4 15.25 12.75
T*9(C,V)*C20 21.0 UC60C 1285 34.4 25.6 15.15 12.70
T*9(C,V)*D20 24.5 FC/MC/PC60D 1225 35.2 26.0 15.95 13.35
T*9(C,V)*D20 24.5 FC/MC62D 1235 35.6 26.4 16.00 13.50
T*9(C,V)*D20 24.5 FC64D 1235 36.0 27.0 16.00 13.00
T*9(C,V)*D20 24.5 UC60D 1225 34.0 24.6 15.45 12.90
T*9X*B12 17.5 FC/MC/PC43B 1270 35.2 26.4 15.25 12.75
T*9X*C16 21.0 FC/MC/PC43C 1260 35.2 26.4 15.50 13.00
T*9X*C16 21.0 FC/MC/PC48C 1280 35.6 26.8 16.00 13.00
T*9X*C16 21.0 FC/PC60C 1275 34.2 25.6 15.50 12.75
T*9X*C16 21.0 HD48 1255 33.6 26.6 15.75 12.75
T*9X*C20 21.0 FC/MC/PC43C 1185 35.0 25.8 15.50 13.00
T*9X*C20 21.0 FC/MC/PC48C 1205 35.6 26.2 16.00 13.00
T*9X*C20 21.0 FC/PC60C 1240 33.8 24.4 15.50 12.75
T*9X*C20 21.0 HD48 1245 35.2 26.2 15.75 12.75
T*9X*D20 24.5 FC/MC/PC48D 1240 35.6 26.2 16.00 13.00
T*9X*D20 24.5 FC64D 1225 36.0 27.0 16.00 13.00
T*9X*D20 24.5 HD48 1260 35.2 26.2 15.75 12.75
T*9X*D20 24.5 UC60D 1285 34.4 25.6 15.50 12.75
Y*(8,L)C*A12 14.5 FC/MC/PC37A 1150 34.2 24.8 14.95 12.40
Y*(8,L)C*B12 17.5 FC/MC/PC43B 1275 34.8 26.0 14.90 12.50
Y*(8,L)C*B12 17.5 HD48 1210 34.8 25.6 15.25 12.50
Y*(8,L)C*C16 21.0 FC/MC/PC43C 1205 35.0 25.8 15.75 13.00
Y*(8,L)C*C16 21.0 FC/MC/PC48C 1210 35.6 26.2 16.00 13.25
Y*(8,L)C*C16 21.0 FC/PC60C 1185 35.0 25.8 16.40 13.45
For notes see Page 19.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
Johnson Controls Unitary Products 13
TCGF36S41S3(E)
Y*(8,L)C*C16 21.0 HD48 1210 35.2 25.8 16.00 13.25
Y*(8,L)C*C16 21.0 UC60C 1195 34.2 24.6 15.75 13.15
Y*(8,L)C*C20 21.0 FC/MC/PC43C 1190 34.6 25.8 15.90 13.10
Y*(8,L)C*C20 21.0 FC/MC/PC48C 1155 35.6 26.4 16.25 13.50
Y*(8,L)C*C20 21.0 FC/PC60C 1215 35.4 26.0 16.20 13.50
Y*(8,L)C*C20 21.0 HD48 1155 35.2 26.0 16.00 13.25
Y*(8,L)C*C20 21.0 UC60C 1215 34.2 24.6 15.70 13.10
Y*9C*B12 17.5 FC/MC/PC43B 1200 34.6 25.4 14.75 12.25
Y*9C*B12 17.5 HD48 1150 34.8 25.6 15.25 12.50
Y*9C*C16 21.0 FC/MC/PC43C 1240 34.8 25.6 15.25 12.75
Y*9C*C16 21.0 FC/MC/PC48C 1195 35.4 26.2 15.75 13.00
Y*9C*C16 21.0 FC/PC60C 1235 35.0 25.8 15.50 13.00
Y*9C*C16 21.0 HD48 1195 35.0 25.8 15.75 13.00
Y*9C*C16 21.0 UC60C 1235 33.8 24.4 15.00 12.55
Y*9C*C20 21.0 FC/MC/PC43C 1200 35.0 25.6 15.50 13.00
Y*9C*C20 21.0 FC/MC/PC48C 1330 35.8 27.2 15.50 12.75
Y*9C*C20 21.0 FC/PC60C 1330 35.6 27.2 15.65 13.15
Y*9C*C20 21.0 HD48 1325 35.4 26.4 15.25 12.75
Y*9C*C20 21.0 UC60C 1285 34.4 25.6 15.15 12.70
Y*9C*D20 24.5 FC/MC/PC60D 1225 35.2 26.0 15.95 13.35
Y*9C*D20 24.5 FC/MC62D 1235 35.6 26.4 16.00 13.50
Y*9C*D20 24.5 FC64D 1235 36.0 27.0 16.00 13.00
Y*9C*D20 24.5 UC60D 1225 34.0 24.6 15.45 12.90
TCGF42S41S3(E)
T*(8,L)V*B12 17.5 HD48 1350 41.0 29.8 14.75 12.50
T*(8,L)V*C16 21.0 FC/MC/PC43C 1425 41.5 30.8 14.50 12.50
T*(8,L)V*C16 21.0 FC/MC/PC48C 1330 41.0 30.6 15.30 12.90
T*(8,L)V*C16 21.0 FC/PC60C 1420 42.0 31.5 15.45 13.15
T*(8,L)V*C16 21.0 FC64D 1420 42.0 31.8 16.00 13.00
T*(8,L)V*C16 21.0 HD48 1435 41.5 30.8 15.25 13.00
T*(8,L)V*C16 21.0 HD60 1420 42.0 31.4 15.55 13.30
T*(8,L)V*C16 21.0 UC48C 1435 40.5 30.8 14.90 12.65
T*(8,L)V*C16 21.0 UC60C 1420 40.5 29.8 15.00 12.75
T*(8,L)V*C20 21.0 FC/MC/PC43C 1450 41.5 30.8 14.50 12.50
T*(8,L)V*C20 21.0 FC/MC/PC48C 1410 41.5 31.4 15.55 13.10
T*(8,L)V*C20 21.0 FC/PC60C 1340 42.0 31.1 15.70 13.40
T*(8,L)V*C20 21.0 FC64D 1410 42.0 31.8 16.00 13.00
T*(8,L)V*C20 21.0 HD48 1410 42.0 31.0 15.25 13.00
T*(8,L)V*C20 21.0 HD60 1410 42.0 31.4 15.85 13.50
T*(8,L)V*C20 21.0 UC48C 1410 40.5 31.0 15.10 12.80
T*(8,L)V*C20 21.0 UC60C 1410 40.5 30.0 15.30 13.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 1300 40.5 30.0 14.75 12.50
T*(8,L)X*C16 21.0 FC/MC/PC43C 1475 41.5 31.8 14.75 12.50
T*(8,L)X*C16 21.0 FC/MC/PC48C 1360 42.0 31.2 15.25 12.75
T*(8,L)X*C16 21.0 FC/MC62D 1360 42.0 31.5 16.00 13.00
T*(8,L)X*C16 21.0 FC/PC60C 1360 41.5 31.4 15.00 12.50
T*(8,L)X*C16 21.0 FC64D 1360 42.0 31.8 16.00 13.00
T*(8,L)X*C16 21.0 HD48 1340 41.5 31.0 15.00 12.75
T*(8,L)X*C16 21.0 UC48C 1400 40.0 29.8 14.90 12.65
T*(8,L)X*C20 21.0 FC/MC/PC43C 1415 41.5 31.4 14.75 12.50
T*(8,L)X*C20 21.0 FC/MC/PC48C 1475 42.0 31.8 15.25 12.75
T*(8,L)X*C20 21.0 FC/MC/PC60D 1485 41.5 31.4 15.00 12.50
For notes see Page 19.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
14 Johnson Controls Unitary Products
TCGF42S41S3(E)
T*(8,L)X*C20 21.0 FC/MC62D 1360 42.0 31.5 16.00 13.00
T*(8,L)X*C20 21.0 FC64D 1485 42.0 32.6 16.00 13.00
T*(8,L)X*C20 21.0 UC48C 1515 40.5 30.8 14.90 12.65
T*9(C,V)*B12 17.5 HD48 1150 40.0 28.2 14.75 12.50
T*9(C,V)*C16 21.0 FC/MC/PC43C 1360 41.0 30.8 14.50 12.50
T*9(C,V)*C16 21.0 FC/MC/PC48C 1395 42.0 31.4 15.25 13.00
T*9(C,V)*C16 21.0 FC/PC60C 1445 41.5 31.0 14.75 12.60
T*9(C,V)*C16 21.0 FC64D 1445 42.0 31.8 15.25 12.65
T*9(C,V)*C16 21.0 HD48 1395 41.5 30.8 15.00 12.75
T*9(C,V)*C16 21.0 HD60 1445 42.0 31.2 14.85 12.75
T*9(C,V)*C16 21.0 UC48C 1395 40.0 30.8 14.70 12.45
T*9(C,V)*C16 21.0 UC60C 1445 40.0 29.6 14.35 12.25
T*9(C,V)*C20 21.0 FC/MC/PC43C 1395 41.5 30.8 14.50 12.50
T*9(C,V)*C20 21.0 FC/MC/PC48C 1430 42.0 31.4 15.00 12.75
T*9(C,V)*C20 21.0 FC/PC60C 1445 41.5 31.2 15.10 12.90
T*9(C,V)*C20 21.0 FC64D 1445 42.0 31.8 16.00 13.00
T*9(C,V)*C20 21.0 HD48 1430 41.5 30.8 14.75 12.50
T*9(C,V)*C20 21.0 HD60 1445 42.0 31.4 15.20 13.00
T*9(C,V)*C20 21.0 UC48C 1430 40.0 30.8 14.60 12.40
T*9(C,V)*C20 21.0 UC60C 1445 40.5 29.6 14.65 12.50
T*9(C,V)*D20 24.5 FC/MC/PC48D 1450 42.0 31.4 15.25 13.00
T*9(C,V)*D20 24.5 FC/MC/PC60D 1445 42.0 31.2 15.30 13.05
T*9(C,V)*D20 24.5 FC/MC62D 1455 42.0 31.6 16.00 13.00
T*9(C,V)*D20 24.5 FC64D 1235 42.0 30.4 16.00 13.00
T*9(C,V)*D20 24.5 HD48 1450 41.5 30.8 15.00 12.75
T*9(C,V)*D20 24.5 HD60 1445 42.0 31.4 15.40 13.15
T*9(C,V)*D20 24.5 UC48D 1450 40.0 30.8 14.80 12.60
T*9(C,V)*D20 24.5 UC60D 1445 40.5 29.8 14.90 12.65
T*9X*B12 17.5 FC/MC/PC43B 1270 40.0 29.0 14.50 12.25
T*9X*C16 21.0 FC/MC/PC43C 1410 41.5 31.0 14.75 12.50
T*9X*C16 21.0 FC/MC/PC48C 1425 42.0 31.8 15.00 12.50
T*9X*C16 21.0 FC/MC62D 1450 42.0 31.5 16.00 13.00
T*9X*C16 21.0 FC/PC60C 1460 41.5 31.2 14.75 12.50
T*9X*C16 21.0 FC64D 1460 42.0 31.8 16.00 13.00
T*9X*C16 21.0 HD48 1465 42.0 31.6 14.75 12.50
T*9X*C16 21.0 UC48C 1425 39.5 29.6 14.50 12.25
T*9X*C20 21.0 FC/MC/PC43C 1400 41.5 31.2 14.75 12.50
T*9X*C20 21.0 FC/MC/PC48C 1420 42.0 31.8 15.00 12.50
T*9X*C20 21.0 FC/MC62D 1450 42.0 31.5 16.00 13.00
T*9X*C20 21.0 FC/PC60C 1460 41.5 31.4 15.00 12.75
T*9X*C20 21.0 FC64D 1460 42.0 31.8 16.00 13.00
T*9X*C20 21.0 HD48 1465 42.0 31.8 14.75 12.50
T*9X*C20 21.0 UC48C 1420 40.0 29.6 14.50 12.25
T*9X*D20 24.5 FC/MC/PC48D 1435 42.0 31.8 15.00 12.50
T*9X*D20 24.5 FC/MC/PC60D 1515 42.0 32.2 15.00 12.75
T*9X*D20 24.5 FC/MC62D 1450 42.0 31.5 16.00 13.00
T*9X*D20 24.5 FC64D 1225 42.0 30.4 16.00 13.00
T*9X*D20 24.5 HD48 1460 47.5 27.4 14.75 12.50
T*9X*D20 24.5 UC48D 1435 40.0 29.8 14.50 12.25
Y*(8,L)C*B12 17.5 HD48 1350 41.0 29.8 14.75 12.50
Y*(8,L)C*C16 21.0 FC/MC/PC43C 1425 41.5 30.8 14.50 12.50
For notes see Page 19.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
Johnson Controls Unitary Products 15
TCGF42S41S3(E)
Y*(8,L)C*C16 21.0 FC/MC/PC48C 1330 41.0 30.6 15.30 12.90
Y*(8,L)C*C16 21.0 FC/PC60C 1420 42.0 31.5 15.45 13.15
Y*(8,L)C*C16 21.0 FC64D 1420 42.0 31.8 16.00 13.00
Y*(8,L)C*C16 21.0 HD48 1435 41.5 30.8 15.25 13.00
Y*(8,L)C*C16 21.0 HD60 1420 42.0 31.4 15.55 13.30
Y*(8,L)C*C16 21.0 UC48C 1435 40.5 30.8 14.90 12.65
Y*(8,L)C*C16 21.0 UC60C 1420 40.5 29.8 15.00 12.75
Y*(8,L)C*C20 21.0 FC/MC/PC43C 1450 41.5 30.8 14.50 12.50
Y*(8,L)C*C20 21.0 FC/MC/PC48C 1410 41.5 31.4 15.55 13.10
Y*(8,L)C*C20 21.0 FC/PC60C 1340 42.0 31.1 15.70 13.40
Y*(8,L)C*C20 21.0 FC64D 1410 42.0 31.8 16.00 13.00
Y*(8,L)C*C20 21.0 HD48 1410 42.0 31.0 15.25 13.00
Y*(8,L)C*C20 21.0 HD60 1410 42.0 31.4 15.85 13.50
Y*(8,L)C*C20 21.0 UC48C 1410 40.5 31.0 15.10 12.80
Y*(8,L)C*C20 21.0 UC60C 1410 40.5 30.0 15.30 13.00
Y*9C*B12 17.5 HD48 1150 40.0 28.2 14.75 12.50
Y*9C*C16 21.0 FC/MC/PC43C 1360 41.0 30.8 14.50 12.50
Y*9C*C16 21.0 FC/MC/PC48C 1395 42.0 31.4 15.25 13.00
Y*9C*C16 21.0 FC/PC60C 1445 41.5 31.0 14.75 12.60
Y*9C*C16 21.0 FC64D 1445 42.0 31.8 15.25 12.65
Y*9C*C16 21.0 HD48 1395 41.5 30.8 15.00 12.75
Y*9C*C16 21.0 HD60 1445 42.0 31.2 14.85 12.75
Y*9C*C16 21.0 UC48C 1395 40.0 30.8 14.70 12.45
Y*9C*C16 21.0 UC60C 1445 40.0 29.6 14.35 12.25
Y*9C*C20 21.0 FC/MC/PC43C 1395 41.5 30.8 14.50 12.50
Y*9C*C20 21.0 FC/MC/PC48C 1430 42.0 31.4 15.00 12.75
Y*9C*C20 21.0 FC/PC60C 1445 41.5 31.2 15.10 12.90
Y*9C*C20 21.0 FC64D 1445 42.0 31.8 16.00 13.00
Y*9C*C20 21.0 HD48 1430 41.5 30.8 14.75 12.50
Y*9C*C20 21.0 HD60 1445 42.0 31.4 15.20 13.00
Y*9C*C20 21.0 UC48C 1430 40.0 30.8 14.60 12.40
Y*9C*C20 21.0 UC60C 1445 40.5 29.6 14.65 12.50
Y*9C*D20 24.5 FC/MC/PC48D 1450 42.0 31.4 15.25 13.00
Y*9C*D20 24.5 FC/MC/PC60D 1445 42.0 31.2 15.30 13.05
Y*9C*D20 24.5 FC/MC62D 1455 42.0 31.6 16.00 13.00
Y*9C*D20 24.5 FC64D 1235 42.0 30.4 16.00 13.00
Y*9C*D20 24.5 HD48 1450 41.5 30.8 15.00 12.75
Y*9C*D20 24.5 HD60 1445 42.0 31.4 15.40 13.15
Y*9C*D20 24.5 UC48D 1450 40.0 30.8 14.80 12.60
Y*9C*D20 24.5 UC60D 1445 40.5 29.8 14.90 12.65
TCGF48S41S4(E)
T*(8,L)C*C16 21.0 FC/MC/PC48C 1565 44.5 32.8 14.25 11.75
T*(8,L)C*C16 21.0 FC/MC/PC48D 1565 44.5 32.8 14.25 11.75
T*(8,L)C*C16 21.0 FC/MC/PC60D 1600 45.5 32.0 14.50 12.00
T*(8,L)C*C16 21.0 FC/MC62D 1635 46.5 33.4 15.00 12.25
T*(8,L)C*C16 21.0 FC/PC60C 1600 45.5 32.0 14.50 12.00
T*(8,L)C*C16 21.0 FC64D 1635 47.0 34.0 15.25 12.50
T*(8,L)C*C16 21.0 HD60 1625 47.0 32.6 15.00 12.50
T*(8,L)C*C16 21.0 UC48C 1615 44.5 33.0 14.50 12.00
T*(8,L)C*C16 21.0 UC60C 1625 45.5 32.0 14.75 12.00
T*(8,L)C*C20 21.0 FC/MC/PC48C 1640 45.0 33.0 14.50 12.00
T*(8,L)C*C20 21.0 FC/MC/PC48D 1640 45.0 33.0 14.50 12.00
For notes see Page 19.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
16 Johnson Controls Unitary Products
TCGF48S41S4(E)
T*(8,L)C*C20 21.0 FC/MC/PC60D 1625 45.5 32.0 14.75 12.00
T*(8,L)C*C20 21.0 FC/MC62D 1620 46.5 33.6 15.25 12.50
T*(8,L)C*C20 21.0 FC/PC60C 1625 45.5 32.0 14.75 12.00
T*(8,L)C*C20 21.0 FC64D 1410 46.0 32.0 15.75 13.00
T*(8,L)C*C20 21.0 HD60 1605 47.0 32.8 15.50 12.75
T*(8,L)C*C20 21.0 UC48C 1640 44.5 33.0 14.50 11.75
T*(8,L)C*C20 21.0 UC60C 1605 45.5 32.2 15.00 12.25
T*(8,L)V*C16 21.0 FC/MC/PC48C 1565 44.5 32.8 14.25 11.75
T*(8,L)V*C16 21.0 FC/MC/PC48D 1565 44.5 32.8 14.25 11.75
T*(8,L)V*C16 21.0 FC/MC/PC60D 1600 45.5 32.0 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC62D 1635 46.5 33.4 15.00 12.25
T*(8,L)V*C16 21.0 FC/PC60C 1600 45.5 32.0 14.50 12.00
T*(8,L)V*C16 21.0 FC64D 1635 47.0 34.0 15.25 12.50
T*(8,L)V*C16 21.0 HD60 1625 47.0 32.6 15.00 12.50
T*(8,L)V*C16 21.0 UC48C 1615 44.5 33.0 14.50 12.00
T*(8,L)V*C16 21.0 UC60C 1625 45.5 32.0 14.75 12.00
T*(8,L)V*C20 21.0 FC/MC/PC48C 1640 45.0 33.0 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC48D 1640 45.0 33.0 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC60D 1625 45.5 32.0 14.75 12.00
T*(8,L)V*C20 21.0 FC/MC62D 1620 46.5 33.6 15.25 12.50
T*(8,L)V*C20 21.0 FC/PC60C 1625 45.5 32.0 14.75 12.00
T*(8,L)V*C20 21.0 FC64D 1410 46.0 32.0 15.75 13.00
T*(8,L)V*C20 21.0 HD60 1605 47.0 32.8 15.50 12.75
T*(8,L)V*C20 21.0 UC48C 1640 44.5 33.0 14.50 11.75
T*(8,L)V*C20 21.0 UC60C 1605 45.5 32.2 15.00 12.25
T*(8,L)X*C16 21.0 FC/MC/PC48C 1600 45.0 33.2 15.00 12.25
T*(8,L)X*C16 21.0 FC/MC/PC48D 1600 45.0 33.2 15.00 12.25
T*(8,L)X*C16 21.0 FC/MC/PC60D 1605 46.0 32.2 15.00 12.25
T*(8,L)X*C16 21.0 FC/MC62D 1360 46.0 31.2 16.00 13.00
T*(8,L)X*C16 21.0 FC/PC60C 1605 46.0 32.2 15.00 12.25
T*(8,L)X*C16 21.0 FC64D 1360 46.5 32.2 16.25 13.25
T*(8,L)X*C16 21.0 HD60 1610 47.0 32.8 15.50 12.75
T*(8,L)X*C16 21.0 UC48C 1600 45.0 33.2 15.00 12.25
T*(8,L)X*C16 21.0 UC60C 1605 45.5 32.2 15.00 12.25
T*(8,L)X*C20 21.0 FC/MC/PC48C 1660 45.0 33.2 15.25 12.50
T*(8,L)X*C20 21.0 FC/MC/PC48D 1660 45.0 33.2 15.25 12.50
T*(8,L)X*C20 21.0 FC/MC/PC60D 1595 46.0 32.2 15.00 12.50
T*(8,L)X*C20 21.0 FC/MC62D 1665 47.0 33.8 15.50 12.75
T*(8,L)X*C20 21.0 FC/PC60C 1595 46.0 32.2 15.00 12.50
T*(8,L)X*C20 21.0 FC64D 1665 47.5 34.2 15.75 13.00
T*(8,L)X*C20 21.0 HD60 1665 47.5 32.8 15.50 12.75
T*(8,L)X*C20 21.0 UC48C 1515 45.0 33.0 16.00 13.00
T*(8,L)X*C20 21.0 UC60C 1540 46.0 32.6 16.00 13.00
T*9(C,V)*C16 21.0 FC/MC/PC48C 1590 44.5 33.0 14.50 11.75
T*9(C,V)*C16 21.0 FC/MC/PC48D 1590 44.5 33.0 14.50 11.75
T*9(C,V)*C16 21.0 FC/MC/PC60D 1590 45.5 32.0 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC62D 1590 46.5 33.4 14.75 12.25
T*9(C,V)*C16 21.0 FC/PC60C 1590 45.5 32.0 14.50 12.00
T*9(C,V)*C16 21.0 FC64D 1590 47.0 34.0 15.00 12.50
T*9(C,V)*C16 21.0 HD60 1590 47.0 32.6 14.75 12.25
T*9(C,V)*C16 21.0 UC48C 1590 44.5 33.0 14.50 11.75
For notes see Page 19.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
Johnson Controls Unitary Products 17
TCGF48S41S4(E)
T*9(C,V)*C16 21.0 UC60C 1590 45.5 32.0 14.25 11.75
T*9(C,V)*C20 21.0 FC/MC/PC48C 1655 44.5 33.0 14.25 11.75
T*9(C,V)*C20 21.0 FC/MC/PC48D 1655 44.5 33.0 14.25 11.75
T*9(C,V)*C20 21.0 FC/MC/PC60D 1655 45.5 32.0 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC62D 1655 46.0 33.4 14.50 12.00
T*9(C,V)*C20 21.0 FC/PC60C 1655 45.5 32.0 14.50 12.00
T*9(C,V)*C20 21.0 FC64D 1655 46.5 33.8 14.75 12.25
T*9(C,V)*C20 21.0 HD60 1655 47.0 32.6 14.75 12.25
T*9(C,V)*C20 21.0 UC48C 1655 44.5 33.0 14.50 11.75
T*9(C,V)*C20 21.0 UC60C 1655 45.5 32.0 14.25 11.75
T*9(C,V)*D20 24.5 FC/MC/PC48D 1645 44.5 33.0 14.25 11.75
T*9(C,V)*D20 24.5 FC/MC/PC60D 1615 45.5 32.0 14.50 12.00
T*9(C,V)*D20 24.5 FC/MC62D 1630 46.5 33.4 14.75 12.25
T*9(C,V)*D20 24.5 FC64D 1630 47.0 34.0 15.00 12.50
T*9(C,V)*D20 24.5 HD60 1615 47.0 32.6 15.00 12.25
T*9(C,V)*D20 24.5 UC48D 1645 44.5 33.0 14.50 11.75
T*9(C,V)*D20 24.5 UC60D 1615 45.5 32.0 14.50 12.00
T*9X*C16 21.0 FC/MC/PC48C 1565 45.0 33.2 15.00 12.25
T*9X*C16 21.0 FC/MC/PC48D 1565 45.0 33.2 15.00 12.25
T*9X*C16 21.0 FC/MC/PC60D 1575 46.0 32.2 15.00 12.25
T*9X*C16 21.0 FC/MC62D 1550 46.5 33.6 15.25 12.50
T*9X*C16 21.0 FC/PC60C 1575 46.0 32.2 15.00 12.25
T*9X*C16 21.0 FC64D 1550 47.0 34.0 15.50 12.75
T*9X*C16 21.0 HD60 1575 47.0 32.8 15.25 12.75
T*9X*C16 21.0 UC48C 1565 45.0 33.2 15.00 12.25
T*9X*C16 21.0 UC60C 1575 45.5 32.2 15.00 12.25
T*9X*C20 21.0 FC/MC/PC48C 1615 45.0 33.2 15.25 12.50
T*9X*C20 21.0 FC/MC/PC48D 1615 45.0 33.2 15.25 12.50
T*9X*C20 21.0 FC/MC/PC60D 1625 46.0 32.2 15.25 12.50
T*9X*C20 21.0 FC/MC62D 1595 46.5 33.6 15.50 12.75
T*9X*C20 21.0 FC/PC60C 1625 46.0 32.2 15.25 12.50
T*9X*C20 21.0 FC64D 1595 47.0 34.2 15.75 13.00
T*9X*C20 21.0 HD60 1625 47.5 32.8 15.50 12.75
T*9X*C20 21.0 UC48C 1615 45.0 33.2 15.25 12.50
T*9X*C20 21.0 UC60C 1625 45.5 32.2 15.00 12.50
T*9X*D20 24.5 FC/MC/PC48D 1635 45.0 33.2 15.00 12.25
T*9X*D20 24.5 FC/MC/PC60D 1490 46.0 31.8 15.75 13.00
T*9X*D20 24.5 FC/MC62D 1425 45.5 31.2 15.75 13.00
T*9X*D20 24.5 FC64D 1425 46.5 32.0 16.00 13.25
T*9X*D20 24.5 HD60 1645 47.0 32.8 15.25 12.75
T*9X*D20 24.5 UC48D 1635 45.0 33.2 15.00 12.25
T*9X*D20 24.5 UC60D 1490 45.5 31.8 15.75 13.00
Y*(8,L)C*C16 21.0 FC/MC/PC48C 1565 44.5 32.8 14.25 11.75
Y*(8,L)C*C16 21.0 FC/MC/PC48D 1565 44.5 32.8 14.25 11.75
Y*(8,L)C*C16 21.0 FC/MC/PC60D 1600 45.5 32.0 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC62D 1635 46.5 33.4 15.00 12.25
Y*(8,L)C*C16 21.0 FC/PC60C 1600 45.5 32.0 14.50 12.00
Y*(8,L)C*C16 21.0 FC64D 1635 47.0 34.0 15.25 12.50
Y*(8,L)C*C16 21.0 HD60 1625 47.0 32.6 15.00 12.50
Y*(8,L)C*C16 21.0 UC48C 1615 44.5 33.0 14.50 12.00
Y*(8,L)C*C16 21.0 UC60C 1625 45.5 32.0 14.75 12.00
For notes see Page 19.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
18 Johnson Controls Unitary Products
TCGF48S41S4(E)
Y*(8,L)C*C20 21.0 FC/MC/PC48C 1640 45.0 33.0 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC48D 1640 45.0 33.0 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC60D 1625 45.5 32.0 14.75 12.00
Y*(8,L)C*C20 21.0 FC/MC62D 1620 46.5 33.6 15.25 12.50
Y*(8,L)C*C20 21.0 FC/PC60C 1625 45.5 32.0 14.75 12.00
Y*(8,L)C*C20 21.0 FC64D 1410 46.0 32.0 15.75 13.00
Y*(8,L)C*C20 21.0 HD60 1605 47.0 32.8 15.50 12.75
Y*(8,L)C*C20 21.0 UC48C 1640 44.5 33.0 14.50 11.75
Y*(8,L)C*C20 21.0 UC60C 1605 45.5 32.2 15.00 12.25
Y*9C*C16 21.0 FC/MC/PC48C 1590 44.5 33.0 14.50 11.75
Y*9C*C16 21.0 FC/MC/PC48D 1590 44.5 33.0 14.50 11.75
Y*9C*C16 21.0 FC/MC/PC60D 1590 45.5 32.0 14.50 12.00
Y*9C*C16 21.0 FC/MC62D 1590 46.5 33.4 14.75 12.25
Y*9C*C16 21.0 FC/PC60C 1590 45.5 32.0 14.50 12.00
Y*9C*C16 21.0 FC64D 1590 47.0 34.0 15.00 12.50
Y*9C*C16 21.0 HD60 1590 47.0 32.6 14.75 12.25
Y*9C*C16 21.0 UC48C 1590 44.5 33.0 14.50 11.75
Y*9C*C16 21.0 UC60C 1590 45.5 32.0 14.25 11.75
Y*9C*C20 21.0 FC/MC/PC48C 1655 44.5 33.0 14.25 11.75
Y*9C*C20 21.0 FC/MC/PC48D 1655 44.5 33.0 14.25 11.75
Y*9C*C20 21.0 FC/MC/PC60D 1655 45.5 32.0 14.50 12.00
Y*9C*C20 21.0 FC/MC62D 1655 46.0 33.4 14.50 12.00
Y*9C*C20 21.0 FC/PC60C 1655 45.5 32.0 14.50 12.00
Y*9C*C20 21.0 FC64D 1655 46.5 33.8 14.75 12.25
Y*9C*C20 21.0 HD60 1655 47.0 32.6 14.75 12.25
Y*9C*C20 21.0 UC48C 1655 44.5 33.0 14.50 11.75
Y*9C*C20 21.0 UC60C 1655 45.5 32.0 14.25 11.75
Y*9C*D20 24.5 FC/MC/PC48D 1645 44.5 33.0 14.25 11.75
Y*9C*D20 24.5 FC/MC/PC60D 1615 45.5 32.0 14.50 12.00
Y*9C*D20 24.5 FC/MC62D 1630 46.5 33.4 14.75 12.25
Y*9C*D20 24.5 FC64D 1630 47.0 34.0 15.00 12.50
Y*9C*D20 24.5 HD60 1615 47.0 32.6 15.00 12.25
Y*9C*D20 24.5 UC48D 1645 44.5 33.0 14.50 11.75
Y*9C*D20 24.5 UC60D 1615 45.5 32.0 14.50 12.00
TCGF60S41S4(E)
T*(8,L)C*C16 21.0 FC/PC60C 1600 54.5 35.8 14.00 12.00
T*(8,L)C*C20 21.0 FC/MC/PC60D 1600 54.5 36.0 14.25 12.25
T*(8,L)C*C20 21.0 FC/MC62D 1620 55.5 37.4 14.50 12.50
T*(8,L)C*C20 21.0 FC/PC60C 1600 54.5 36.0 14.25 12.25
T*(8,L)C*C20 21.0 FC64D 1630 56.5 39.5 14.75 12.75
T*(8,L)C*C20 21.0 HD60 1605 56.0 37.0 14.50 12.50
T*(8,L)C*C20 21.0 UC60C 1605 54.5 36.0 14.25 12.25
T*(8,L)V*C16 21.0 FC/PC60C 1600 54.5 35.8 14.00 12.00
T*(8,L)V*C20 21.0 FC/MC/PC60D 1600 54.5 36.0 14.25 12.25
T*(8,L)V*C20 21.0 FC/MC62D 1620 55.5 37.4 14.50 12.50
T*(8,L)V*C20 21.0 FC/PC60C 1600 54.5 36.0 14.25 12.25
T*(8,L)V*C20 21.0 FC64D 1630 56.5 39.5 14.75 12.75
T*(8,L)V*C20 21.0 HD60 1605 56.0 37.0 14.50 12.50
T*(8,L)V*C20 21.0 UC60C 1605 54.5 36.0 14.25 12.25
T*(8,L)X*C16 21.0 FC/PC60C 1605 54.5 36.2 14.25 12.25
T*(8,L)X*C16 21.0 UC60C 1605 54.5 36.0 14.25 12.25
T*(8,L)X*C20 21.0 FC/MC/PC60D 1690 55.5 37.4 14.75 12.50
For notes see Page 19.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
Johnson Controls Unitary Products 19
PSC furnaces, such as the TG8S, TGLS, and TG9s, use Coil Only Ratings.
TCGF60S41S4(E)
T*(8,L)X*C20 21.0 FC/MC62D 1665 56.0 38.1 14.75 12.75
T*(8,L)X*C20 21.0 FC/PC60C 1595 54.5 36.0 14.50 12.25
T*(8,L)X*C20 21.0 FC64D 1665 57.0 40.0 15.00 13.00
T*(8,L)X*C20 21.0 HD60 1665 56.5 37.6 14.75 12.75
T*(8,L)X*C20 21.0 UC60C 1595 54.5 36.0 14.50 12.25
T*(8,L)X*C20 21.0 UC60D 1690 55.0 37.2 14.75 12.50
T*9(C,V)*C20 21.0 FC/MC/PC60D 1655 55.0 37.2 14.00 12.00
T*9(C,V)*C20 21.0 FC/MC62D 1655 55.5 37.4 14.00 12.00
T*9(C,V)*C20 21.0 FC/PC60C 1655 55.0 37.2 14.00 12.00
T*9(C,V)*C20 21.0 FC64D 1655 56.5 39.0 14.25 12.25
T*9(C,V)*C20 21.0 HD60 1655 56.0 37.2 14.25 12.25
T*9(C,V)*C20 21.0 UC60C 1655 54.5 36.2 14.00 12.00
T*9(C,V)*D20 24.5 FC/MC/PC60D 1615 54.5 36.0 14.00 12.00
T*9(C,V)*D20 24.5 FC/MC62D 1630 55.5 37.2 14.25 12.25
T*9(C,V)*D20 24.5 FC64D 1630 56.5 39.0 14.50 12.50
T*9(C,V)*D20 24.5 HD60 1615 55.5 36.8 14.25 12.25
T*9(C,V)*D20 24.5 UC60D 1615 54.5 36.0 14.00 12.00
T*9X*C16 21.0 FC/PC60C 1575 54.5 35.8 14.25 12.25
T*9X*C16 21.0 UC60C 1575 54.5 35.8 14.25 12.25
T*9X*C20 21.0 FC/MC/PC60D 1645 55.5 37.4 14.75 12.50
T*9X*C20 21.0 FC/MC62D 1595 55.5 37.2 14.75 12.50
T*9X*C20 21.0 FC/PC60C 1625 55.0 36.4 14.50 12.50
T*9X*C20 21.0 FC64D 1595 56.5 39.0 14.75 12.75
T*9X*C20 21.0 HD60 1625 56.0 37.2 14.75 12.75
T*9X*C20 21.0 UC60C 1625 54.5 36.4 14.50 12.25
T*9X*C20 21.0 UC60D 1645 55.0 36.6 14.50 12.50
T*9X*D20 24.5 FC/MC/PC60D 1730 55.5 37.4 14.75 12.50
T*9X*D20 24.5 FC/MC62D 1645 55.5 37.6 14.50 12.50
T*9X*D20 24.5 FC64D 1645 56.5 39.5 14.75 12.75
T*9X*D20 24.5 HD60 1645 56.0 37.4 14.75 12.50
T*9X*D20 24.5 UC60D 1730 55.5 38.1 14.75 12.75
Y*(8,L)C*C16 21.0 FC/PC60C 1600 54.5 35.8 14.00 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC60D 1600 54.5 36.0 14.25 12.25
Y*(8,L)C*C20 21.0 FC/MC62D 1620 55.5 37.4 14.50 12.50
Y*(8,L)C*C20 21.0 FC/PC60C 1600 54.5 36.0 14.25 12.25
Y*(8,L)C*C20 21.0 FC64D 1630 56.5 39.5 14.75 12.75
Y*(8,L)C*C20 21.0 HD60 1605 56.0 37.0 14.50 12.50
Y*(8,L)C*C20 21.0 UC60C 1605 54.5 36.0 14.25 12.25
Y*9C*C20 21.0 FC/MC/PC60D 1655 55.0 37.2 14.00 12.00
Y*9C*C20 21.0 FC/MC62D 1655 55.5 37.4 14.00 12.00
Y*9C*C20 21.0 FC/PC60C 1655 55.0 37.2 14.00 12.00
Y*9C*C20 21.0 FC64D 1655 56.5 39.0 14.25 12.25
Y*9C*C20 21.0 HD60 1655 56.0 37.2 14.25 12.25
Y*9C*C20 21.0 UC60C 1655 54.5 36.2 14.00 12.00
Y*9C*D20 24.5 FC/MC/PC60D 1615 54.5 36.0 14.00 12.00
Y*9C*D20 24.5 FC/MC62D 1630 55.5 37.2 14.25 12.25
Y*9C*D20 24.5 FC64D 1630 56.5 39.0 14.50 12.50
Y*9C*D20 24.5 HD60 1615 55.5 36.8 14.25 12.25
Y*9C*D20 24.5 UC60D 1615 54.5 36.0 14.00 12.00
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES 2

700699-YTG-B-0812
20 Johnson Controls Unitary Products
ACCESSORIES
Refer to Price Manual for specific model numbers.
Off Cycle Timer Delay - Provides a 5-minute off cycle to pre-
vent rapid recycling of the compressor.
Start Assist Kit (S1-2SA067) - Provides increased starting
torque for areas with low voltage. See Hard Start Kit Accessory
Installation Manual for Hard Start Kit part number for each
model.
TXV Kits - S1-1TVM series thermal expansion valves precisely
meter refrigerant for optimum performance over a wide range of
conditions. See System Charge table for TXV part number for
each model.
Thermostats - Compatible thermostat controls are available
through accessory sourcing. For optimum performance and
installation, refer to the UPGNET “Low Voltage Wiring Diagram”
document to select and apply controls.
SOUND POWER LEVEL - TYPICAL OCTAVE BAND SPECTRUM ((db re. 1-pW)
Rated in accordance with ARI Standard 270.
TYPICAL INSTALLATION
TYPICAL FIELD WIRING
Models 63 125 250 500 1000 2000 4000 8000 dBA
18 67 70 66 67 68 66 60 57 72
24 67 70 68 69 70 63 60 57 73
30 67 69 67 69 72 66 59 56 74
36 70 73 63 65 69 61 56 53 71
42 71 68 65 70 70 64 58 58 73
48 68 70 66 68 68 63 60 58 72
60 68 70 65 70 73 66 64 62 76
60” OVERHEAD
CLEARANCE
MINIMUM 18” SERVICE
ACCESS CLEARANCE
ON ONE SIDE
WEATHERPROOF
DISCONNECT
SWITCH
THERMOSTAT
10” CLEARANCE
AROUND PERIMETER
CONTROL
ACCESS
PANEL
TO INDOOR COIL
NEC CLASS 1 WIRING
NEC CLASS 2 WIRING
TO FURNACE OR
AIR HANDLER
TERMINAL BLOCK
SEAL OPENING(S) WITH
PERMAGUM OR EQUIVALENT
NOTES:
ALL OUTDOOR WIRING MUST BE WEATHERPROOF.
MINIMUM 24” UNIT TO UNIT CLEARANCE.
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES
POWER WIRING
208/230-1-60
CONTACTOR
TERMINALS
COIL
GND.
LUG
CYRGW
YRGW
POWER WIRING
CONTROL WIRING
FACTORY WIRING
24 VOLT CONTROL WIRING
MINIMUM 18 GA. WIRE
(NEC CLASS 2)
FURNACE OR AIR HANDLER TERMINAL BLOCK
ROOM THERMOSTAT
CONDENSING UNIT
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.
TERMINAL W IS ONLY
REQUIRED ON SYSTEMS
WITH HEAT.
*
*