YOTRIO Mainstays Palmerton Landing Bar... User manual

Warranty Coverage Requirements:
1. Copy of your Original Store Receipt.
2. Pictures of the damaged parts.
3. You must know the name of your product and any corresponding item
numbers as well as the name of the store where you purchased the item.
4. Please gather all of this informaon BEFORE you call customer service.
DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE
AT:
www.yotrioint.com
www.yotrioint.com
www.yotrioint.com
www.yotrioint.com
OR TOLL FREE AT:
1-866-905-4107
1-866-905-4107
1-866-905-4107
1-866-905-4107
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30
AM TO 8:00PM EASTERN STANDARD TIME
YOTRIO
YOTRIO
YOTRIO
YOTRIO CUSTOMER
CUSTOMER
CUSTOMER
CUSTOMER CARE
CARE
CARE
CARE
1

CARE AND MAINTENANCE
Before using, wipe the product completely with a so, dry cloth.
Spot-clean Cushions and slings using a sponge, mild soap and water. Rinse thoroughly with clean water. To
prevent mildew, allow to air dry completely before using or storing.
Never machine wash or tumble dry cushions, slings or umbrella covers as this will result in shrinkage or
damage.
Rinse wicker pao furniture with a hose or pressure washer. If the wicker is really dirty, you can use mild
soap with water. Allow to dry completely before using or storing.
To clean your pao umbrella, use a so brush and mild soap and water. Allow to dry completely before
storing.
Avoid placing hot objects directly onto table top surface without a heat protector.
Always store and/or cover your pao furniture in a cool dry place when not in used and away from direct
sunlight.
When storing, never wrap cushions in plasc. Plasc doesn't allow the cushion to breathe and can cause it
to mildew if there's any moisture present.
Always place your pao furniture away from fire, extreme heat, freezing condions and inclement weather
such as rain, hail, sleet, snow or wind.
Never use bleach or strong solvents to clean as this will cause damage to both fabric and metal finishes.
Do not allow water to build up in frames as this will cause corrosion and damage.
ONE-YEAR FRAME AND ONE-YEAR FABRIC/WICKER/FINISH ETC. LIMITED WARRANTY
You must retain the original receipt to obtain warranty service.
Frames are warranted against defects in materials and workmanship for a period of one year from the date
of original purchase.
This warranty does not cover damage to frames or welds due to commercial use, improper assembly, acts
of nature, fire, freezing and abusive use.
Rust, corrosion, and/ or rust stains are not covered by warranty.
Purchased parts are not covered under this warranty.
Fabric on cushions, slings and umbrella is warranted one year against separaon at the seams.
Fading, mildew, and color discoloraon due to exposure to the elements, chemicals and spills are not
covered.
The Powder coat and/ or paint are warranted one year against blistering, peeling, or crackling.
Fading due to exposure to elements, chemicals and spills is not covered. Scratches and chips due to normal
wear and use are not covered.
Wicker Weave are warranted one year against breakage, separaon, or tearing.
Fading or discoloraon due to exposure from chemicals, spills and/ or the elements is not covered.
Warranty covers free replacement of item within one year of purchase. Aer the one year it remains the
customer's responsibility for freight and packaging charges to and from our service center.
We do not compensate the individual or any outside party for assembling or disassembling the product.
Any replacement of warranted items will be in the original style and color, or similar style and color if the
original is un-available or has been disconnued.
Quesons, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. – 5:00 p.m. PST /11:30 a.m.- 8:00 p.m., EST, Monday- Friday.
2

Vendor stock No.: MSD128059664020
Mainstays Palmerton Landing Bar 5PCS Set - Chair
Wal-Mart Assembly Instructions
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
Package Contents
Hardware Contents
PART NO. PICTURE DESCRIPTION QTY
AA M6×15 Bolt &
Washer 73+1
3
BB
CC
M6×30 Bolt &
Washer 14+1
1
Ratchet
Wrench
2 High Back Chairs 2 Low Back Chairs
1 Table

NOTE: Do not completely tighten bolts until all steps are completed.
Use the original carton as a soft working surface in order not to damage product
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
4
Step 1
- Attach the Front Leg Support Bar (E) to the Right Arm (A)
and Left Arm (B) with M6x15 Bolt & Washer(AA).
- Attach the Back Leg Support Bar (F) to the Chair Back (C)
with M6x15 Bolt & Washer(AA).
- Loosely tigten with Ratchet Wrench (CC).
Step 2
Vendor stock No.: MSD128059664020
Mainstays Palmerton Landing Bar 5PCS Set - Chair
Wal-Mart Assembly Instructions
- Attach the Chair Seat (D) to the Right Arm (A) and
Left Arm (B) with M6x15 Bolt & Washer(AA).
- Loosely tigten with Ratchet Wrench (CC).
STEP 1
STEP 2
This chair unit is heavy, and may require two adults for safe assembly.
AA M6×15 Bolt &
Washer
Seat
NO .P ART P IC T URE D E S C RIP T IO N Q T Y
A
Back
2
2
2
2
B
C
D
Right Arm
Left Arm
A
E
F
2
2
Back Leg
Support Bar
Front Leg
Support Bar
32

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
5
Step 5
- Completely tighten all the bolts.
- Ensure all connections are secure.
- Repeat above steps for another chair .
Step 3
- Attach the Chair Seat (D) to the Chair Back (C) with
M6x15mm Bolt & Washer (AA).
- Loosely tigten with Ratchet Wrench (CC).
Step 4
- Attach the Right Arm (A) and Left Arm (B) to the
Chair Back (C) with M6x15mm Bolt & Washer (AA).
- Tigten with Ratchet Wrench (CC).
STEP 3
STEP 4
STEP 5
NOTE: Do not completely tighten bolts until all steps are completed.
Use the original carton as a soft working surface in order not to damage product
Vendor stock No.: MSD128059664020
Mainstays Palmerton Landing Bar 5PCS Set - Chair
Wal-Mart Assembly Instructions
This chair unit is heavy, and may require two adults for safe assembly.

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
6
Seat & Back
NO .P ART P IC T URE D E S C RIP T IO N Q T Y
G
2
2
2
4
H
I
J
Right Arm
Left Arm
K
2
Back Leg
Support Bar
Front Leg
Support Bar
- Attach the Front Leg Support Bar (J) to the
Right Arm (H) and Left Arm (I) with M6x15
Bolt & Washer(AA).
- Loosely tigten with Ratchet Wrench (CC).
Step 1
STEP 1
NOTE: Do not completely tighten bolts until all steps are completed.
Use the original carton as a soft working surface in order not to damage product
Vendor stock No.: MSD128059664020
Mainstays Palmerton Landing Bar 5PCS Set - Chair
Wal-Mart Assembly Instructions
This chair unit is heavy, and may require two adults for safe assembly.
24
8
AA
BB
M6×15 Bolt &
Washer
M6×30 Bolt &
Washer

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
7
Step 2
- Attach the Back Leg Support Bar (K)
to the Right Arm (H) and Left Arm (I)
with M6x15mm Bolt & Washer (AA).
- Loosely tigten with Ratchet Wrench (CC).
Step 3
- Attach the Right Arm (H) and the Left Arm (I)
to the Seat & Back (G) with M6x30mm
Bolt & Washer (BB).
- Loosely tigten with Ratchet Wrench (CC).
STEP 4
STEP 3
STEP 2
Step 4
- Turn the chair right side up.
- Completely tighten all the bolts.
- Ensure all connections are secure.
- Repeat above steps for another chair.
NOTE: Do not completely tighten bolts until all steps are completed.
Use the original carton as a soft working surface in order not to damage product
Vendor stock No.: MSD128059664020
Mainstays Palmerton Landing Bar 5PCS Set - Chair
Wal-Mart Assembly Instructions
This chair unit is heavy, and may require two adults for safe assembly.

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
8
M
L
O
Step 1
- Please the Table Top (L) upside down on a
soft surface.
- Attach the Left Side Panel (M) and
Right Side Panel (O) to the Table Top (L)
with M6x15 Bolt & Washer(AA).
- Loosely tigten with Ratchet Wrench (CC).
STEP 1
NOTE: Do not completely tighten bolts until all steps are completed.
Use the original carton as a soft working surface in order not to damage product
Vendor stock No.: MSD128059664020
Mainstays Palmerton Landing Bar 5PCS Set - Table
Wal-Mart Assembly Instructions
This table unit is heavy, and may require two adults for safe assembly.
L
1
1
1
1
M
N
O
P
Q
2
1
Shelf
NO.
PART PICTURE DESCRIPTION QTY
R
Table Top
1
Left Side
Panel
Middle Side
Panel
Right Side
Panel
Back Panel
Middle Leg
AA
BB
M6×15 Bolt &
Washer
M6×30 Bolt &
Washer
17
6

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
9
STEP 2
Step 2
- Attach the Middle Leg (R) to the Left
Panel (M) and Right Panel (O) with
M6x15mm Bolt & Washer (AA) .
STEP 3
STEP 4
Q
N
Step 4
- Attach the Middle Panel (N) to the Back Panel (Q)
with M6x30mm Bolt & Washer (BB).
Step 3
- Attach the Back Panel (Q) to the
Middle Leg with M6x15mm Bolt & Washer (AA).
- Attach the Back Panel (Q) to the
Left Panel (M) and Right Side Panel (O)
with M6x30mm Bolt & Washer (BB).
NOTE: Do not completely tighten bolts until all steps are completed.
Use the original carton as a soft working surface in order not to damage product
Vendor stock No.: MSD128059664020
Mainstays Palmerton Landing Bar 5PCS Set - Table
Wal-Mart Assembly Instructions
This table unit is heavy, and may require two adults for safe assembly.
- Loosely tigten with Ratchet Wrench (CC).
- Loosely tigten with Ratchet Wrench (CC).
- Tighten with Ratchet Wrench (CC).
Q
M
O
O
R
M

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
10
P
O
N
Step 5
- Attach the
Shelf (P) to the Right Panel (O)
and Middle Panel (N) with M6x15 Bolt &
Washer(AA).
STEP 6
STEP 5
Step 6
- Completely all the bolts .
- Turn the table right side up.
NOTE: Do not completely tighten bolts until all steps are completed.
Use the original carton as a soft working surface in order not to damage product
Vendor stock No.: MSD128059664020
Mainstays Palmerton Landing Bar 5PCS Set - Table
Wal-Mart Assembly Instructions
This table unit is heavy, and may require two adults for safe assembly.