YOTRIO Target halsted FRS80712GST1 User manual

>>assembly instructions TM
halsted
steel wicker loveseat
style # FRS80712GST1
dpci # 009008271

Congratulations on your latest Target purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time.
Good luck – though we're confident you won't need it.
IMPORTANT WARNING:
Unpack the box on a clean, soft, level surface and make sure all parts have been included.
To replace missing or damaged parts please call 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
ATTENTION:
This Chair is not intended for use during any kind of inclement weather and the manufacturer is not,
and can not be, held responsible for any damages caused as a result of such weather. Weather-related
damage, or damage as a result of the Chair not being stored properly when not in use, is not the responsiblity
of the manufacturer.
During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail, sleet), freezing
conditions and extreme heat, the Chair needs to be stored in a dry, sheltered place to prolong the life and to avoid
damage to the Chair.
2

WARRANTY:
This Chair comes with a one year limited warranty against original manufacture defects. If you experience
trouble with your chair, please call the customer service number below.
Target Corporation
Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
Code: Yotrio 2018
before you begin
1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
3

table of contents
introduction
hardware
parts list
assembly
2-3
5
6
7-12
QUESTIONS? Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have t h e style number and DPCI number ready when calling.
4

hardware
5
(Part E)×2
M6*20mm screw
(Part I)×1
allen wrench
(Part H)×10
washer
(Part F)×6
M6*40mm screw
(Part G)×2
M6*50mm screw

6
ITEM DESCRIPTION QUANTITY
1
Aright armrest
Bleft armrest 1
A
1
Cchair back
Dchair seat 1
B
C
D

7
step 01:
Do not completely tighten screws until all screws are in place.
(Part E)×1
M6*20mm screw
(Part H)×1 (Part I)×1
allen wrench
washer
1. Attach the right armrest (A) to the back frame (C) by lining up screw holes
on the right armrest (A) with corresponding screw holes on the back frame (C).
2. Secure with M6*20mm screw (E) and washer (H) using allen wrench (I).
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
E
H
A
C

step 02:
Do not completely tighten screws until all screws are in place.
(Part F)×2
M6*40mm screw
(Part H)×4 (Part I)×1
allen wrench
washer
1. Attach the seat frame (D) to the back frame (C) and right armrest (A) by lining up screw
holes on the back frame (C) and right armrest (A) with corresponding screw holes on the
back frame (C).
2. Secure with M6*40mm screw (F) and washer (H) using allen wrench (I) on the right
armrest (A) and seat frame (D).
3. Secure with M6*50mm screw (G) and washer (H) using allen wrench (I) on the back
frame (C) and seat frame (D).
8
1. 2.
(Part G)×2
M6*50mm screw
F
H
H
A
G
C
H
D
F

step 03:
(Part H)×2
washer
9
Do not completely tighten screws until all screws are in place.
(Part F)×2
M6*40mm screw
(Part I)×1
allen wrench
1. Attach the left armrest (B) to the seat frame (D) by lining up screw holes
on the rleft armrest (B) with corresponding screw holes on the seat frame (D).
2. Secure with M6*40mm screw (F) and washer (H) using allen wrench (I).
C
F
F
B
A
H
H
D

step 04:
10
(Part F)×1
M6*40mm screw
(Part H)×2 (Part I)×1
allen wrench
washer
Do not completely tighten screws until all screws are in place.
D
1. Secure with M6*40mm screw (F) and washer (H) using allen wrench (I) on the
right armrest (A) and back frame (C).
2. Secure with M6*20mm screw (E) and washer (H) using allen wrench (I) on the
back frame (C) and left armrest (B).
1. 2.
(Part E)×1
M6*20mm screw
E
H
A
C
H
F
B

11
step 05 :
(Part H)×1
washer
Do not completely tighten screws until all screws are in place.
(Part F)x1
M6*40mm screw
(Part I)×1
allen wrench
1. Secure with M6*40mm screw (F) and washer (H) using allen wrench (I) on the
left armrest (B) and back frame (C).
B
CH
F

step 06:
12
.
2. Turn the chair to upright position onto a flat, level surface.
Put the cushion on the chair.
You are now ready to enjoy your new chair.
1. Tighten all the screws.

15

TM
2018 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.