YOTRIO Target halsted FRS80712E-C1 User manual

halsted
steel wicker club chair
style # FRS80712E-C1/C2/C3/C4/C5
dpci # 009005412/5419/5426/8305/8314
>>assembly instructions TM

Congratulations on your latest Target purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time.
Good luck – though we're confident you won't need it.
ATTENTION:
This Chair is not intended for use during any kind of inclement weather and the manufacturer is not,
and can not be, held responsible for any damages caused as a result of such weather. Weather-related
damage, or damage as a result of the Chair not being stored properly when not in use, is not the
responsibility of the manufacturer.
During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail,
sleet), freezing conditions and extreme heat, the Chair needs to be stored in a dry, sheltered place to
prolong the life and to avoid damage to the Chair.
2
IMPORTANT WARNING:
Unpack the box on a clean, soft, level surface and make sure all parts have been included.
To replace missing or damaged parts please call 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.

WARRANTY:
This Chair comes with a one year limited warranty against original manufacture defects. If you experience
trouble with your chair, please call the customer service number below.
3
Target Corporation
Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
Code: Yotrio 2018
before you begin
1. Check for damage or missing parts. Call to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
855-MYTGTHOME (855-698-4846)

table of contents
introduction
hardware
parts list
assembly
2-3
5
6
7-10
QUESTIONS?
4Please call 855-MYTGTHOME (855-698-4846) parts and service. For faster service, have th e style number and DPCI number ready when calling.

hardware
5
(Part C)×2
M6*30mm screw
(Part E)×1
allen wrench
(Part D)×2
washer

ITEM DESCRIPTION QUANTITY
1
A
6
chair back
Bchair seat 1
A
B

7
step 01:
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
1. Insert the chair back (A) to the pinVon the chair seat (B).
A
B

step 02 :
Do not completely tighten screws until all screws are LQSODFH.
(Part C)×1
M6*30 mm screw
(Part E)×1
allen wrench
(Part D)×1
washer
8
A
B
CD
1. Line up screw hole on the left armrest of the chair seat (B) ZLWK
corresponding screw holeRQWKHFKDLUEDFN$.
Secure with M6*30mm screw (C) and washer (D) using allen
wrench (E).

step 03:
9
(Part C)×1
M6*30 mm screw
(Part E)×1
allen wrench
(Part D)×1
washer
1. Line up screw hole on the right armrest of the chair seat (B) ZLWK
with corresponding screw holeRQWKHFKDLUEDFN$.
Secure with M6*30mm screw (C) and washer (D)using allen
wrench (E).
B
A
D
C
Do not completely tighten screws until all screws are LQSODFH.

step 04:
10
.
2. 7urnWKH chair to upright position.3XWWKH
cushions on the chair.
You are now ready to enjoy your new chair.
1. Tighten all the screws.

11

TM
2018 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.