YOTRIO JDC-1357D User manual

THE ASSEMBLY INSTRUCTION
OF
3PCS Edison Bistro Set
Caution:
This 3PCS Edison Bistro Set was made for the explicit purpose of
providing outdoor functions and is not to be used as a toy. This product
is not intended for Inclement /Severe weather in any form including, but
not limited to: rain, hail, sleet, snow and/or wind. The Manufacturer
recommends that with formidable weather approaching you store and/or
cover this table. Do not locate structure near any open flame. Do not use
structure as a support. Do not shake, lean or climb on it. A competent
adult should supervise children under the age of 10 at all times. This
product is NOT intended for commercial use and will void the warranty.

LIMITED WARRANTY
Yotrio Corporation, Nogales, CA. 91748, extends a two year frame and
one year fabric limited warranty to the original purchaser as a sign of our
dedication to the highest possible quality standards. The warranty is
design to cover this 3PCS Edison Bistro Set under normal residential use.
This Warranty is non-transferable and void if the furniture is used in
non-residential environment and/or has been abused. The warranty also
becomes void in the event the 3PCS Edison Bistro Set has been damage
by acts of God, calamity or misuse. This warranty does not cover in the
event of inclement weather such as rain, hail, sleet, snow or wind. We
reserve the right to make substitutions with similar merchandise, if the
model in questions is no longer in production. The manufacturer
recommends that with ANY formidable weather approaching you
disassemble and store your 3PCS Edison Bistro Set in a safe location.
For further details please refer to the CAUTION warning section of this
Assembly instruction.

DONOTRETURNTORETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.yotrioint.com
OR TOLL FREE AT:
1-866-905-4107
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME /
11:30 AM TO 8:00PM EASTERN STANDARD TIME
YOTRIO CUSTOMER CARE

ASSEMBLY INSTRUCTION OF 3PCS EDISON BISTRO SET
JDC-1357D
Part list Description Qty
A Chair Back 1
B Left Arm 1
C Right Arm 1
D Chair Base 1
E Bolt (E) 6
F Bolt (F) 2
G Washer 8
H Bolt Cover 8
I Allen Wrench 1
Step 1: Assemble Left Arm (B) and Right
Arm (C) together with Chair Base (D) by
using Bolts (E) and Washers (G). But do
not tighten them. Please see Fig. 1
Fig. 1
Fig. 2
Step 2: Assemble Chair Base (D)
together with Chair Back (A) by using
Bolts (E) and Washers (G). And then
assemble Chair Back (A) together with
Left Arm (B) and Right Arm (C) by using
Bolts (F). Please tighten all Bolts and put
on the Bolt Covers (H) on the Bolts (E)
and Bolts (F). Please see Fig. 2

ASSEMBLY INSTRUCTION OF 3PCS EDISON BISTRO SET
JDT-2049-2020
Part list Description Qty
A Table Rim 1
B Table Leg 4
C Table Top 1
D Bolt 8
E Washer 16
F Bolt Cover 16
G Allen Wrench 1
Step 1: Lay down the Table Rim (A) on
a soft surface such as a blanket.
Assemble Table Legs (B) and the Table
Rim (A) by using Bolts (D) and Washers
(E). Tighten all the bolts and put all the
Bolt Covers (F) on. Please see Fig. 1
Fig. 1
Fig. 2
Step 2: Turn the table upside down
on a flat surface and carefully put the
Table Top (C) on. Please see Fig. 2