Zacuto Fee-N-G User manual

Assembling your Fee-N-G
For more information, watch our tutorial video at Zacuto.com
x1
DSLR Universal
Baseplate w/ Hand Grip
x1
EVF Standard Mount
w/ Rubber Stopper
x1
Fee-N-G Handle
x1 x2
7’’ and 4.5’’ Rods
x1
Shoulder Pad
x1
Z-Lite Double
5/32’’
Allen Wrench
1To assemble your Fee-N-G start by attaching the EVF Standard Mount w/ Rubber Stopper to the
DSLR Universal Baseplate w/ Hand Grip as shown
Next, screw combined 7” and 4.5” Rods into
the DSLR Universal Baseplate as shown
NOTE: Using 5/32” allen tighten screw to
secure EVF Standard Mount with
Rubber Stopper
2With Rods secure slide Fee-N-G Handle
onto Rod as shown and tightren red
ratcheting lever
3
Parts
Included:
LEFT LOOSE
RIGHT TIGHT

Assembling your Fee-N-G
For more information, watch our tutorial video at Zacuto.com
4With Fee-N-G Handle in place, slide shoulder pad onto rods
5Finally, slide Z-Lite Double onto rods and tighten red knob until
it is secure
LEFT LOOSE
RIGHT TIGHT
PULL UP TO
RE-POSITION
LEFT LOOSE
RIGHT TIGHT
NOTE:
To aid in weight
disbursment of the
Fee-N-G loosen
red ratcheting lever
and tilt as shown
final assembly
*