ZALMAN CNPS7500 LED User manual

CNPS7500 LED
* Please read this manual thoroughly before installation.
http://www.zalman.co.kr http://www.zalmanusa.com
(English version)
CNPS8700 LED
IInntteell SSoocckkeett 777755 CCPPUU
Core 2 Quad
Core 2 Extreme
Core 2 Duo
Pentium D
Pentium 4
Celeron D
AAMMDD SSoocckkeett AAMM22//775544//993399//994400 CCPPUU
Athlon 64 FX
Athlon 64 X2 Dual-Core
Athlon 64
Opteron
Dual-Core Opteron
Sempron

※
The specifications of any product may change without prior notice to improve performance.
1
Note(1) The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Sockets
AM /754/939/940. Special care should be taken when moving a computer equipped with a cooler that exceeds
the specified weight limit. Zalman is not responsible for any damage that occurs when moving a computer.
Note (2) The fan operates at ,550rpm (35.5dBA) if directly connected to the motherboard’s power connector
without the use of Fan Mate .
Note(3) Measured at 1m distance away from the sound source.
CNPS8700 LED
Model
Spec.
Material Pure Copper
Dimensions 120(L) X 123(W) X 67(H)mm
Heat Dissipation Area 3300㎠
Weight 475g
(1)
Bearing Type 2 Ball-Bearing
Rotation Speed
(2)
1,150 ~ 2,300 rpm ± 10 %
Noise Level
(3)
17.5 ~ 33 dBA ± 10%
Output Voltage 5 ~ 11V ± 2%
Power Consumption 6W or lower
1. Features
1) Compatible with all single, dual, and quad core CPUs for Intel socket 775 and AMD socket
AM /754/939/940.
) Compatible with Slim Tower / Low Profile Home Theatre PC Enclosures.
3) 100% pure copper heatsink with aerodynamically optimized “tunnel” design for high performance
cooling.
4) Patented curved heatpipe design for heat transfer performance of up to 4 heatpipes using just .
5) Ultra-thin 0. mm fins for minimized weight and significantly reduced airflow resistance.
6) The 110mm fan inside the heatsink cools not only the CPU, but the VGA card, Northbridge, FET, and
RAM as well.
7) Does not generate noise or vibration in Silent Mode.
8) The adjustable fan speed controller (Fan Mate ) enables control of noise and fan performance.
2. Specifications
3. Explo e View
Fan
Clip Lever
Fan Support Fixing Screw
Clip
Fan Support
Base Cover
Fan Fixing Screw
Heatsink
Fan
Fan Mate 2

※
The specifications of any product may change without prior notice to improve performance.
2
1) Use and keep the product away from the reach of children.
) Check the components list and condition of the product before installation. If any problem is found,
contact your place of purchase to obtain a replacement.
3) Excessive force exerted on the fan may damage the fan, resulting in damage to the system.
4) Avoid inserting any objects into the fan while it is in operation.
5) Do not ingest or put the thermal grease into the mouth. If ingested, get medical attention.
Disclaimer)
Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not
limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper
installation, or improper testing.
Precautions
2) Components for Intel Socket 77
❾ Four (4) Clip Support Fixing Bolts
❿ One (1) Clip Support for Socket 775
󱆌 One (1) Backplate for Socket 775
3) Components for AMD Socket AM2/7 4/939/940
󳢬 No additional components
1) Common Components
❶ Cooler (CNPS8700 LED)
❷ Thermal Grease
❸ Fan Speed Controller (Fan Mate )
❹ Double-Sided Tape (for Fan Mate attachment)
❺ Cable for Fan Mate
❻ User’s Manual
❼Clip
❽Clip Lever
❽
❻
❶
❿
󱆌
❷
❾
󳣍Korean Patent Registration No. 10-0600448
󳣍Korean Design Registration No. 07-9753
󳣍Patent applications pending in over 0 nations around the world including the USA, EU, and Japan.
4. Patents
5. Components
❸❹❺
❼

※
The specifications of any product may change without prior notice to improve performance.
3
6. Compatible CPUs
7. Installation (Intel Socket 775)
1) All CPUs conforming to Intel Socket 77 platform
2) All CPUs conforming to AMD Socket AM2/7 4/939/940 platform
Caution) No motherboard components such as the PSU, disk drives, VGA card, and RAM with a height
greater than 39mm should be present within a 61.5mm radius from the center of the CPU.
1) Clip Support Installation
Align the Clip Support for Socket 775(⑩) and the Backplate for Socket 775(⑪) with the mounting holes on the
motherboard and fasten them together with the Clip Support Fixing Bolts(⑨). The Lever Slot on the Clip Support
for Socket 775 should be properly oriented on the hinged side of the Socket Lever when installing.
※If the Lug of the Clip Support for Socket 775 interferes with any motherboard components, install the Clip
Support for Socket 775 with the Lug facing a different direction to avoid interference.
< Intel Socket 775 > < AMD Socket AM /754/939/940 >
Clip Support Fixing Bolt, ⑨
Clip Support for Socket 775, ⑩
Motherboard
Backplate for Socket 775, ⑪
Socket Lever Hinge
Socket Lever
Lever Slot
Lug
Lug
38mm
61.5mm
30mm
61.5mm

※
The specifications of any product may change without prior notice to improve performance.
4
4) Cooler Installation
Slide the Clip Lever(⑧) onto the Clip’s(⑦) Groove for Intel. Align and connect the Clip’s Lug Slot with the
Arrow Marked Lug on the Clip Support for Socket 775. Press onto the Clip Lever when aligning the Lever’s Slot
with the Lug. Make sure that the cooler is installed on the center of the CPU.
) Power Connection (Fan Mate 2 Connection)
◆Please refer to Fan Mate Installation and Usage on page 6.
2) Clip Installation
Insert the Clip(⑦) between the Heatpipes. Turn the Clip so that the central hole comes in alignment with the
Base Cover’s projecting part. Now attach the Clip so that its central hole slides over the projecting part of the
Base Cover. Do not exert any excessive force on the fan during the Clip installation. Excessive force on the fan
could lead to product damage.
3) Thermal Grease Application
Clear off particles or any residue from the top of the CPU then
spread a sufficient amount of the included Thermal Grease(②) on
top of the CPU.
Clip,⑦
Clip Lever,⑧
Clip Lever,⑧
Clip’s Lug Slot
Arrow Marked Lug
Lug
Groove for AMD
Groove for Intel

※
The specifications of any product may change without prior notice to improve performance.
5
1) Clip Installation
Insert the Clip(⑦) between the Heatpipes. Turn the Clip so that the central hole comes in alignment with the
Base Cover’s projecting part. Now attach the Clip so that its central hole slides over the projecting part of the
Base Cover. Do not exert any excessive force on the fan during the Clip installation. Excessive force on the
fan could lead to product damage.
8. Installation (AMD Socket AM2/754/939/940)
3) Cooler Installation
Slide the Clip Lever(⑧) onto the Clip’s(⑦)Groove for AMD. Align and connect the Clip’s Lug Slot with the Lug
on the motherboard’s Retention Frame. Press onto the Clip Lever when aligning the Leve’s Slot with the Lug.
Make sure that the cooler is installed on the center of the CPU.
4) Power Connection (Fan Mate 2 Connection)
◆Please refer to Fan Mate Installation and Usage on page 6.
2) Thermal Grease Application
Clear off particles or any residue from the top of the CPU then
spread a sufficient amount of the included Thermal Grease(②) on
top of the CPU.
Clip,⑦
Clip Lever,⑧
Clip Lever,⑧
Clip’s Lug Slot
Lug Lug
Groove for AMD
Groove for Intel

※
The specifications of any product may change without prior notice to improve performance.
6
9. FAN MATE 2 Installation an Usage
1) FAN MATE installation inside a System ) FAN MATE installation on the outside of a system
Connect the two 3-pin connectors of the
cable to the motherboard and to
CNPS8700’s Fan Connector as shown in
the diagram.
Pull the 6-Pin Connector out of the system
through the back and connect it to FAN
MATE , which should be installed on the
case using the included Double-sided tape.
◆The fan operates in Silent Mode when the speed control knob of FAN MATE is fully turned in the
counter-clockwise direction. The fan operates in Normal Mode when the speed control knob of FAN
MATE is fully turned in the clock-wise direction. The fan speed can be controlled according to user
preference by adjusting the speed control knob.
Note) FAN MATE has been specifically designed for the fan of this product.
Zalman Tech Co., Ltd. is not responsible for any damages to the system or CPU resulting
from its use with other types of fans.
10. Notes on Usage
1) Checking CPU Compatibility
Please refer to “Compatible CPUs”on page 3 to confirm that your CPU is compatible with
CNPS8700 before using it.
2) Cautions During Booting
The computer system may automatically shut down when booting the computer after the system
monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case,
fully turn the speed control knob in the clockwise direction before rebooting to disable the ‘CPU Fan
Detected’ option in BIOS, or set the CPU fan’s rotational speed to 1,150rpm or lower in the system
monitoring program.
Note) Some motherboards fail to boot if the rotational speed of the CPU fan is below a certain rpm.
However, booting can be possible even at low fan rpm if the BIOS settings are updated. For
more information on updating your BIOS, please refer to the website of the motherboard
manufacturer. There are motherboards which fail to detect the rpm while operating the cooler
in Silent Mode, but this does not affect computing performance.
3) OVERCLOCKING
Zaman Tech Co., Ltd. is not responsible for any damages to the system and CPU resulting from
overclocking.
Fan Connector
(CNPS8700)
Motherboard
Double - sided Tape
Fan Mate
6-Pin Connector

※
The specifications of any product may change without prior notice to improve performance.
7
12. Home Theatre PC Enclosures
The HD160XT is designed for ultra quiet home theatre
PC operation, utilizing optimized ventilation and
anti-vibration reinforcements, making it ideal for
environments that require silence such as living
rooms, bedrooms, educational facilities, and offices.
For more information, please visit our website.
Zalman's Noiseless Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler, Noiseless
Case Fans, VGA Coolers, and Fan Controllers facilitate stable performance and a noiseless
computing environment.
11. Zalman Computer Noise Prevention Systems
Noiseless Power Supply Fanless Northbridge Cooler Heatpipe HDD Cooler
Noiseless Case Fan Ultra Quiet VGA Cooler Fan Controller
HD160XT