ZALMAN ZM-WB4 GOLD User manual

Please visit our website and watch the ZM-WB4 Gold installation video for easy installation.
※Please read this manual thoroughly before installation.
※The specifications of this product and its components may change without prior notice to
improve performance.
http://www. alman.co.kr http://www. almanusa.com
ZM-WB4 Gold
(English Version)
CPU WATER BLOCK
for Higher Water Cooling Perfor ance

※ The specifications of any product may change without prior notice to improve performance.
1
1) Test the product for leakage away from the system before installing it on the system. confirming no leakage,
proceed with the installation and use.
2) Use approved coolant for computer water cooling to prevent corrosion.
3) Use coolant tubes listed under the compatibility list.
4) Do not use the product if it interferes with any motherboard components.
5) Familiarize yourself with this manual.
6) Keep this product and its associated system away from children.
Precautions
1) Weight : 135g
2) Materials : Pure Copper (Water Block Base) and Polyester (Water Block Cover)
3) Dimensions : 63(W) x 63(L) x 16.5(H)mm
4) Compatible Tubes (Outer x Inner) : 14x10mm, 13x10mm, 13x9mm, 12x9mm, 12x8mm, 11x8mm, 10x8mm
2. Specifications
1) Zalman’s creative dimple type processing technology allows lightness in weight and excellent cooling performance.
2) Pure copper base material water block provides excellent heat transfer, and gold plated base prevents corrosion.
3) Use of transparent and strengthened plastic water block cover allows lightness in weight, excellent durability,
and view for the user to be able to check the flow of internal coolant.
4) Connection fitting for the hose is a single body cover in the form of two connection structure types, which allows
for various types of hoses to be used.
5) Compatible with Intel Pentium 4 (Socket 775/478) and AMD (Socket AM2/754/939/940).
Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited
to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation,
or improper testing.
1. Features
Disclai er

※ The specifications of any product may change without prior notice to improve performance.
2
3. Exploded View
Bolt
Water Block Assembly
Fixing Bolt for Clip Support
Clip Support for Socket 775
Clip Support for Socket 478
Backplate for Socket 775
Clip Bolt
Clip for Intel
Retention Guide
Clip for AMD
ZM WB4 Gold
Retention Guide for AMD
IInntteell PPeennttiiuumm 44 ((SSoocckkeett 777755))IInntteell PPeennttiiuumm 44 ((SSoocckkeett 447788))
※※CClliipp CCoommbbiinnaattiioonnss ffoorr IInntteell
AAMMDD ((SSoocckkeett AAMM22//775544//993399//994400))
Tube Clamp B (11.5 X 8mm):13x9mm, 12x9mm, 12x8mm, 11x8mm, 10x8mm
Tube Clamp A (13.8 X 8mm): 14x10mm, 13x10mm
※※IInnssttaallllaattiioonn ffoorr DDiiffffeerreenntt TTuubbee SSiizzee

※ The specifications of any product may change without prior notice to improve performance.
3
4. Co ponents
1) Common Components
①CPU Water Block Assembly
②Two(2) Clips
③Four(3) Bolts
④Three(3) Clip Bolts
⑤Thermal Grease
⑥Two(2) Tube Clamps A (13.8 X 8mm )
⑦Two(2) Tube Clamps B (11.5 X 8mm )
⑧Paper Washer
⑨User’s Manual
2) Components for Intel Pentium 4 (Socket 775)
⑩Clip Support for Socket 775
⑪Backplate for Socket 775
⑫Four(4) Fixing Bolts for Clip Support
3) Components for Intel Pentium 4 (Socket 478)
⑬Two(2) Clip Supports for Socket 478
4) Components for AMD (Socket AM2/754/939/940)
⑭Clip for AMD
❼
❽❾
❶❷
❸❹
❺❻
󱆎
󱆏
󱆍❿󱆌

※ The specifications of any product may change without prior notice to improve performance.
4
5. Installation
1) Intel Pentium 4 775
①①Install Clip Supports for Socket 775
Align the clip support for socket 775 and the backplate for socket 775 with the mounting holes on the motherboard and
fasten them together using the clip support fixing bolt. The lever slot on the clip support should be properly oriented
on the hinged side of the socket lever when installing.
②②Install Clip
Align the Clip’s holes with the Waterblock tabs as shown in
the diagram, and install the Clips by slowly screwing the Clip
Bolts into the Clip holes. Hold the Clips with one hand, and
install with slight hand motions for easy installation.
③③Apply Thermal Grease
Clean the contact surface of the CPU completely.
Apply Thermal Grease on the CPU surface that makes
contact with the base of the Water Block.
④④Install CPU Water Block
Set the CPU Water Block at the center of the CPU.
Screw the Bolts in slightly, then tighten each Bolt a few
turns at a time while alternating between the two until the
Clips are completely pressed against the Clip Support.
CPUCPUCPU
Clip Support Fixing Bolt
Clip Support for Socket 775
Motherboard
Backplate for Socket 775
Socket Lever
Lever Slot
Socket Lever
Clip
Clip Bolt
Thermal Grease

※ The specifications of any product may change without prior notice to improve performance.
5
2) Intel Pentium 4 478
①①Install the Clip Supports for Socket 478
Install the Clip Supports for Socket 478 on
both sides of the Retention Guide as shown
in the diagram on the right.
②②Install Clip
Align the Clips’ holes with the Waterblock tabs as
shown in the diagram, and install the Clips by
slowly screwing the Clip Bolts into the Clip holes.
Hold the Clips with one hand, and install with
slight hand motions for easy installation.
Note 1) Make sure that the outlet is installed in a
manner so that the outlet is placed above
the inlet as shown in the picture.
Retention Guide Clip Support for Socket 478
Clip
Clip Bolt
Outlet
Inlet
Motherboard

※ The specifications of any product may change without prior notice to improve performance.
6
3) AMD AM2/754/939/940
②②Install CPU Water Block
Set the CPU Water Block at the center of the
CPU. Hook the Clip’s slot into the center lug of
Clip support, then hook the lever’s slot into the
other center lug.
①①Apply Thermal Grease
Clean the contact surface of the CPU
completely. Apply Thermal Grease on the CPU
surface that makes contact with the base of
the Water Block.
Center Lug
Lever’s Slot
Thermal Grease
Lever
④④Install CPU Water Block
Set the CPU Water Block at the center of the
CPU. Screw the Bolts in slightly, then tighten
each Bolt a few turns at a time while alternating
between the two until the Clips are completely
pressed against the Clip Support.
③③Apply Thermal Grease
Clean the contact surface of the CPU
completely. Apply Thermal Grease on the CPU
surface that makes contact with the base of
the Water Block.
Thermal Grease
Clip’s Slot
Center Lug

※ The specifications of any product may change without prior notice to improve performance.
7
Stable performance and noiseless liquid cooling system can both be achieved with the use of
Zalman’s Noiseless Power Supply, Heatpipe Hard Disk Cooler, Noiseless Case Fan and Northbridge
Water Block.
Zal an Noise Prevention Syste
TNN(Totally No Noise) Co puter Case
Ho e Theatre PC Enclosures
TNN Computer Enclosures are the world’s first environment friendly noiseless computer enclosures
that operate without the use of a fan. TNN Computer Enclosures use the aluminum enclosure itself
as a heatsink. They are ideal for environments that require silence, as well as for home theatre
systems and multi media systems.
The HD160 is designed for ultra quiet home theatre
PC operation, utilizing optimized ventilation and
anti vibration reinforcements, making it ideal for
environments that require silence such as living
rooms, bedrooms, educational facilities, and offices.
For more information, please visit our website.
HD160
TNN 300 TNN 500AF
Noiseless Power Supply Heatpipe HDD Cooler Noiseless Case Fan Northbridge Water Block