Zavio M511W User manual

M511W User Manual
0

M511W User Manual
1
M511W Wireless Pan/Tilt IP Camera
Firmware User Manual
-Contents -
CHAPTER 1. MINIMUM SYSTEM REQUIREMENT............................................................................................... 2
CHAPTER 2. USING IP CAMERA VIA WEB BROWSER ........................................................................................ 3
2.1WINDOWS WEB BROWSER....................................................................................................................................... 3
2.2 MAC WEB BROWSER............................................................................................................................................... 5
CHAPTER 3. SETTING UP WIRELESS CONFIGURATION ................................................................................... 8
CHAPTER 4. USING IP CAMERA VIA MOBILE PHONE.....................................................................................11
4.1 USING IP CAMERA VIA IPHONE............................................................................................................................. 11
4.2 MOBILE PHONE VIEWING ..................................................................................................................................... 12
CHAPTER 5. MSN MESSENGER............................................................................................................................... 13
CHAPTER 6. CONFIGURATION OF MAIN MENU................................................................................................ 18
6.1 LIVE VIEW ............................................................................................................................................................. 19
6.2 SETTING ................................................................................................................................................................. 21
6.3 CLIENT SETTING ................................................................................................................................................... 22
6.4 IMAGE SETUP......................................................................................................................................................... 23
6.5 PT CONTROL ......................................................................................................................................................... 24
CHAPTER 7. SETTING-BASIC................................................................................................................................... 25
7.1 SYSTEM .................................................................................................................................................................. 26
7.2 CAMERA................................................................................................................................................................. 31
7.3 NETWORK .............................................................................................................................................................. 37
7.4 SECURITY............................................................................................................................................................... 54
CHAPTER 8. SETTING-ADVANCE ........................................................................................................................... 57
8.1 PT CONTROL ......................................................................................................................................................... 58
8.2 PRESET POSITION .................................................................................................................................................. 59
8.3 PATROL .................................................................................................................................................................. 60
8.4 FTP CLIENT........................................................................................................................................................... 61
8.5 SMTP .................................................................................................................................................................... 68
8.6 HTTP EVENT ......................................................................................................................................................... 77
8.7 ALARM OUTPUT .................................................................................................................................................... 84
8.8 SCHEDULE.............................................................................................................................................................. 88
8.9 ALARM INPUT ........................................................................................................................................................ 90
8.10 MOTION DETECTION........................................................................................................................................... 91
8.11 SYSTEM LOG........................................................................................................................................................ 93
CHAPTER 9. APPENDIX ............................................................................................................................................. 94

M511W User Manual
2
Firmware User Manual
Chapter 1. Minimum System Requirement
We strongly recommend your computers follow our minimum requirements in order to use this
IP-Camera normally. If computer level is lower than this, it might cause some problems.
Item Requirements
CPU Pentium 4 1600MHz (or equivalent AMD)
Graphic Card 64 MB RAM graphic cards(or equivalent on-board graphic cards)
RAM 512 MB
Operating System Windows 98, Windows ME (Please see Note)
Windows2000, 2003, XP, Vista, Mac OS X Leopard
Web Browser Internet Explore 6 or later
Note:
1. If you are using Windows 98 or Windows ME, please install IP Installer before using WEB UI
to ensure the system runs normally.
2. If you can't view the record video file, please install Xvid codec while installing Intelligent IP
Installer. (For Windows 98, ME or 2000 server, the codec might not work properly. You’ll need to
download Xvid codec 1.0 from the internet.
3. Please always update the latest Windows component. (.Net Framework, Windows Media Player,
Enhance ActiveX Security)

Chapter 2. Using IP Camera via Web Browser
2.1Windows Web Browser
1. Start your web browser, and enter the IP address or host name of the IP camera in the
Location / Address field of your browser.
Note :
If you only want to view the video without setting page, enter “http://<IP>/index2.htm”
as your web URL.
2. Use the default account “admin” and default password “admin”.
Note :
The default user name “admin” and the password are set at the factory for the
administrator. You can change them in the Account Menu (Please check “Setting ĺ
Basic ĺSecurity ĺAccount”)
3

3. The monitor image will be displayed in your browser. In the far left side of main
configuration are Setting, Client Setting, and Image Setup and PT control. For more
details, you can check Chapter 6.2
Ε
Chapter 6.3
Ε
Chapter 6.4 and Chapter 6.5.
4

2.2 Mac Web Browser
1. Click the Safari icon, and enter the IP address of the IP camera in the Location / Address
field of your browser.
Note :
If you only want to view the video without setting page, enter “http://<IP>/index2.htm”
as your web URL.
5

2. Use the default account “admin” and default password “admin”.
Note :
The default user name “admin” and the password are set at the factory for the
administrator. You can change them in the Account Menu (Please check “Setting ĺ
Basic ĺSecurity ĺAccount”)
6

3. The monitor image will be displayed in your browser. In the far left side of main
configuration are Setting, Client Setting, and Image Setup and PT control. For more
details, you can check Chapter 6.2
Ε
Chapter 6.3
Ε
Chapter 6.4 and Chapter 6.5.
7

Chapter 3. Setting up Wireless Configuration
The wireless network has to be set up by using cable network connection. After setting the
camera correctly, the wireless function can work without cable network connection. Please follow
the setting process below step by step:
1. Connect IP Camera with Ethernet connection. (Check chapter 7.3.6 for more details)
2.Go to Setting
Ш
Basic
Ш
Network
Ш
Wireless choose option “On”. You will see the
wireless setting page.
2. Go to ϘSettingШBasicШNetworkШWirelessϙ, set the Wireless option to “ON” .
3. Then click “Refresh”. All access points (AP) around you will show up.
8

4. Select the AP you wish to connect.
5. Enter password at active transmit key if you need. If you don't know the setting of the
wireless AP, please ask your network administrator.
6. Choose the option of Obtain an IP address automatically (DHCP).
7. Choose the option of Obtain DNS server address automatically.
9