Zenitel Vingtor Stentofon ITSV-3 User manual
Technical Manual 1490003010
QUICK INSTALLATION & CONFIGURATION GUIDE
ITSV-3
IP Touch Station with Video
1
The ITSV-3 is a product developed for Zenitel Norway AS and
is primarily used as part of a Zenitel Norway AS IP Intercom
solution. The ITSV-3 is not pre-congured to support or carry
emergency calls to any type of hospital, law enforcement agency,
medical care unit (“Emergency Service(s)”) or any other kind of
Emergency Service. You must make additional arrangements to
access Emergency Services. It is your responsibility to purchase
SIP-compliant Internet telephone service, properly congure the
ITSV-3 to use that service, and periodically test your conguration
to conrm that it works as you expect. If you do not do so, it is
your responsibility to purchase traditional wireless or landline
telephone services to access Emergency Services.
ZENITEL NORWAY DOES NOT PROVIDE CONNECTIONS TO
EMERGENCY SERVICES VIA THE ITSV-3. NEITHER ZENITEL
NORWAY NOR ITS OFFICERS, EMPLOYEES OR AFFILIATES
MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS.
YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR
CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR
INABILITY TO USE THE ITSV-3 TO CONTACT EMERGENCY
SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL
ARRANGEMENTS TO ACCESS EMERGENCY SERVICES
IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING
PARAGRAPH.
2
Package Contents
Precautions
Warning: Please DO NOT power cycle the ITSV-3 during system boot-up
or rmware upgrade. You may corrupt rmware images and cause the unit to
malfunction.
Warning: Use only the power adapter included in the ITSV-3 package.
Using an alternative non-qualied power adapter may possibly damage the unit.
1x ITSV-3 Main Case 1x Handset 1x Phone Cord
1x Ethernet Cable 1x 12V Power Adapter
1x Quick Installation Guide / 1x GPL License
1x Wall Mount
1x Screen Cleaning Cloth
12V
3
Overview
Phone Setup
• ITSV-3 Touch Station with Video (Item Number: 1490003010)
The ITSV-3 features a 7” 1024x600 capacitive touch screen TFT LCD, megapixel
camera, dual Gigabit ports with PoE/PoE+, integrated WiFi (802.11a/b/g/n) &
Bluetooth, rich peripheral interfaces, and Android 7.0. The ITSV-3 delivers HD
audio & video, leading edge SIP intercom features and integration with IC-EDGE
and ICX-AlphaCom IP Intercom Platforms developed by Zenitel Norway AS.
ITSV-3 redenes the desktop communication experience with a raised level of
innovation and integration of state-of-the-art real-time video conferencing, and
personalized rich media presentation & delivery.
1. Attach the wall mount to the slots on the back of the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab from the handset cradle (see gure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the
handset while the phone is mounted on the wall.
Installing the Phone with Wall Mount
Slots for
wall mount
Built-in phone
stand for desktop
Tab with extension up
Handset Rest
Tab with extension down
1x ITSV-3 Main Case 1x Handset 1x Phone Cord
1x Ethernet Cable 1x 12V Power Adapter
1x Quick Installation Guide / 1x GPL License
1x Wall Mount
1x Screen Cleaning Cloth
12V
Wall Mount
4
Connecting the Phone
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN Port of the phone to the RJ45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable.
3. Connect the 12V DC output plug to the Power jack on the phone and plug the
power adapter into an electrical outlet. If PoE switch is used in step 2, this step
could be skipped.
4. The LCD will display booting up or rmware upgrading information. Before
continuing, please wait for the main screen display to appear.
5. Using the web conguration interface or the menu of the touch screen, you can
further congure network connection using static IP, DHCP, etc.
The ITSV-3 has a built-in phone stand. To
use it, pull out the phone stand handle on
the back of the phone. Adjust the angle as
preferred and make sure the phone stands
still on the desktop.
Using the Phone Stand
3.5mm
Headset Port
LAN Port Handset
Port
Power RJ9 Headset
Port
HDMI Port
PC Port
SD Card Slot
*USB Port
*USB enabled only when power supply or PoE+ is used.
Slots for
wall mount
Built-in phone
stand for desktop
5
Tips for Using the ITSV-3 Keys
1. Make sure the phone is properly powered up, in idle screen mode and
connected to the network.
2. Select Settings > > . Tap on one of the Accounts
to congure , SIP server (ICX-AlphaCom or IC-EDGE), SIP
ser ID (Extension Number), (if required) and SIP
(if required).
Note: For changes to take immediate eect, it may be necessary to temporarily disable
the account. Do this by setting to OFF and tapping OK. Then re-
enable your account by setting to ON and tapping OK.
3. Follow the LCD menu options to congure other settings on the phone. For
example, to congure static IP on the ITSV-3, set up static IP address via menu
Settings > Network > Ethernet settings.
4. If you want to see your accounts on your home screen, return to the home
screen (press the button). Press the Menu button, and select Widgets.
Several account display widgets will appear. Select and drag the widget to the
home screen.
Phone Conguration
• For further information on the configuration for
ICX-AlphaCom, SIP, and IC-EDGE, please see
Zenitel Wiki
Volume Down Volume Up Home Menu Back
Status Indicator
6
1. Ensure your phone is properly powered up and connected to the Internet.
2. To nd the IP address of the ITSV-3, use the touch screen and tap Settings >
Status > Network status > IPv4 address
3. Enter the phone’s IP address in your PC’s browser.
4. Log in by entering the default username / password: /
5. To register an account on the ITSV-3:
●Select > > General Settings
6. Set , SIP Server (ICX-AlphaCom or IC-EDGE), SIP
User ID (Directory Number), (if required) and SIP
(if required).
Note: For changes to take immediate eect, it may be necessary to temporarily disable
the account. First uncheck the box for , then click Save and Apply (button
appears in yellow bar at top of browser). Once this is done, re-enable the account by
checking the box for followed by Save and Apply again.
Note:
After logging in for the very rst time,
you will be prompted to change the
password.
7
The following sections describes how the ITSV-3 is congured to work together with
the TCIV+ Video Intercoms TCIV-2+/TCIV-3+/TCIV-5+/TCIV-6+.
ICX-AlphaCom Conguration
● Log into the ITSV-3 by entering default username / password: /
●Select >>General Settings
● Enter the values shown above for the parameters
Check Yes box
SIP Server: IP address of (see Main Settings in TCIV+)
SIP User ID: Directory Number of ITSV-3 phone
Same as SIP User ID
● Check in AlphaPro under Users & Stations the codec that has been selected for
the SIP phone (normally )
●Select >
●Remove all codecs from the list except the one dened in AlphaPro, i.e.
8
The video is streamed in H.264 format over RTSP protocol from the TCIV+ camera to the
ITSV-3. The TCIV+ camera must have a static IP address.
●Select > Call Settings
● Check the box for
●Select >Add
●: Selectfrom the dropdown box
●: Select Vingtor Stentofon from the dropdown box
●: Name of Camera List
●: This will be used for calls from any station in the camera list. It is
possible to add several camera lists and use a dierent ringtone for each list.
● Click for to open the camera list
● Enter the directory number and camera URL of the TCIV+ station
System Number: Directory Number of TCIV+ station
System Address: rtsp://<user:password>@<TCIV+ IP address>:<port no.>/media?encoder=H264
Example: rtsp://admin:[email protected]:554/media?encoder=H264
Note: For TCIV units, System Address = rtsp://admin:[email protected]:554/1/RTSP/video
9
IC-EDGE Conguration
The ITSV-3 has to be manually added to the Edge Controller.
● Log on to the Edge Controller
●Select Edge Controller > >
● Under click the + button to select
from the dropdown list
For further information on the configuration of IC-EDGE, please see Zenitel Wiki
● Log into the ITSV-3 by entering default username / password: /
●Select >>General Settings
●Enter values for the parameters
Check Yes box
SIP Server: IP address of intercom station set as Edge Controller
SIP User ID: Directory Number of the ITSV-3 phone
Same as SIP User ID
The video is streamed directly from the TCIV+ camera to the ITSV-3. The TCIV+
camera must have a static IP address.
●Select > Call Settings
● Check the box for
Zenitel Norway AS
Sandakerveien 24C
0403 Oslo, Norway
For Warranty and RMA information, please visit www.zenitel.com
*Android is a Registered Trademark of Google, Inc.
DOC NUMBER
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Vingtor-Stentofon products are developed and marketed
by Zenitel. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.
ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if
not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must include this legend: Zenitel – All rights reserved.
www.zenitel.com
CONTACT
CUSTOMER SERVICE
GLOBAL: +47 4000 2700
USA: 800 654 3140
Mon-Fri 09:00 to 17:00 CST
cs@zenitel.com
A100K12023 Oct 2020
This manual suits for next models
1
Table of contents
Other Zenitel Intercom System manuals
Zenitel
Zenitel Turbine Compact IP + Guide
Zenitel
Zenitel EAPFX-1-V2 Instruction Manual
Zenitel
Zenitel VR3G-1 Guide
Zenitel
Zenitel Vingtor Stentofon AlphaCom User manual
Zenitel
Zenitel VINGTOR STENTOFON ITSV-1 User manual
Zenitel
Zenitel EAPFX-1-V2 Guide
Zenitel
Zenitel ITSV-2 User manual
Zenitel
Zenitel Phontech CIS 3100 Instruction Manual
Zenitel
Zenitel IPDM-V2_P User manual
Zenitel
Zenitel VINGTOR STENTOFON ECP-AA1 Quick guide
