Zest 4 Leisure Aquatic Planter User manual

Assembly Instructions
(W x D x H) 0.90m x 0.90m x 0.45m
Product Name: Aquatic Planter
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]

Aquatic Planter Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit.
Aquatic Planter Pack List
Item Description Quantity
A Panel 2
B Panel 2
C Capping Trim 4
Liner 1
Fixings
60 mm Screws 32
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[e-mail]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill
Bit.
The Aquatic Planter is now complete.
1. Interlock PanelsA with Panels B (Figs.1a & 1b) to form a square planter.
2. Secure in position using 8no Screws - 2no per internal corner (Fig.2a) and 16no
screws - 4no per external corner (Fig.2b).
3. Place Liner into planter ensuring edges of liner are flush with outside edge of
planter. Position Capping Trim C, ensuring internal face is flush with planter body
and rounded corner outermost. Fix in position as shown in Fig.3a using 2no
Screws.
Similarly fix remaining capping trims as shown (circled) in Fig.3b.

www.zest4leisure.co.uk
1b
1a
2a 2b
3a 3b