Zest 4 Leisure Sleeper Cold Frame User manual

Assembly Instructions
(W x D x H): 1.70m x 0.60m x 0.43m/0.32m
Product Name: Sleeper Cold Frame
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V1-11.15

Sleeper Cold Frame Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
The colour version of this document can be downloaded from:
www.zest4leisure.co.uk/downloads/category/C1
Sleeper Cold Frame Pack List
Item Description Quantity
A1/A2 Side Panel 2
BFront Panel 1
CBack Panel 1
DWindow Support 2
EHinged Window 2
Fixings
50mm Screws 12
25mm Screws 12
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Sleeper Cold Frame is now complete.
1. Attach Side PanelA1 to Front Panel B and Back Panel C using 5no 50mm
Screws – 2no per Front Panel B and 3no per Back Panel C (Figs.1a &1b).
Repeat procedure for remaining Side PanelA2.
2. Attach Window Support D to Side PanelA1 using 1no 50mm Screw (Fig.2).
Similarly fix remaining Window Support D to Side PanelA2.
3. Attach Hinged Windows E to Back Panel C as shown in Fig.3 using 12no 25mm
Screws, 3no per hinge.
1b1a
2 3