Zest 4 Leisure Sleeper Raised Bed User manual

Assembly Instructions
(W x D x H) 0.90m x 0.90m x 0.45m
Product Name: Sleeper Raised Bed
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]

Sleeper Raised Bed Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit.
Sleeper raised Bed Pack List
Item Description Quantity
A Panel 2
B Panel 2
C Capping Trim 4
Fixings
60 mm Screws 16
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[e-mail]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill
Bit.
The Sleeper Raised Bed is now complete.
1. Interlock PanelsA with Panels B (Figs.1a & 1b) to form a square planter.
2. Secure in position using 8no Screws (2 per corner). See Fig.2.
3. Position Capping Trim C, ensuring internal face is flush with planter body and
rounded corner outermost. Fix in position as shown in Fig.3a using 2no Screws.
Similarly fix remaining capping trims as shown (circled) in Fig.3b.

www.zest4leisure.co.uk
1b
1a
2
3a 3b