Zest 4 Leisure Scafell Obelisk User manual

Assembly Instructions
(W x D x H) m0.39 x 0.39m x 1.2m
Product Name: Scafell Obelisk
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-08.14

Scafell Pike Obelisk Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit.
Scafell Pike Obelisk Pack List
Item Description Quantity
A Side Panel 4
B Cap 1
Fixings
30mm Screws 16
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit.
Scafell Pike Obelisk is now complete.
1. Align two Trellis PanelsA as shown in Fig.1a. Ensuring that screw holes
are positioned in overlap of horizontal batten (See arrows Fig.1a) and
horizontal battens face outwards, attach panels using 3no 30mm screws
(Figs.1b, 1c & 1d). Repeat procedure to attach subsequent panels to form
an obelisk.
2. Locate Cap (B) into top of obelisk and fix in position using 4no 30mm
screws (Figs.2a & 2b)

www.zest4leisure.co.uk
1b1a
2a 2b
1c
1d