Zest 4 Leisure Hanging Flower Bell User manual

Assembly Instructions
(W x D x H) 0.36m x 0.36m x 1.50m
Product Name: Hanging Flower Bell
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-10.15

Hanging Flower Bell Assembly Instructions
Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver,, Hammer,3mm Drill Bit
required in order for you to drill all screw holes before construction.
Hanging Flower Bell Pack List
Item Description Quantity
A1 Long Lath 4
A2 Short Lath 4
B Base 1
C Collar 2
D Ring Section 8
E Finial 1
Fixings
Pins 12
30mm Screws 8
Nuts & Bolts 8
Screw Eye 1
www.zest4leisure.co.uk

Hanging Flower Bell Assembly Instructions
N.B. All screw holes must be predrilled.
It is recommended that elements A1 & A2 of this product be soaked in water for 2
hours prior to assembly.
1. Position Long and Short Laths A1 & A2 alternately around Base B (Fig.1a), slide on
Collar C and fix laths in position using 8no Pins –1no per lath (Fig.1b).
Fix Collar C in position using 4no 30mm Screws (Fig.1c).
2. Assemble Ring Sections D as shown in Fig.2a to form a ring, ensuring slots are
outermost (Fig.2b). Fully tighten nuts at this stage.
3. Position ring assembly as shown in Fig.3.
4. Bring LathsA1 together around Finial E (Fig.4a), secure in position using Collar C
and 4no 30mm Screws (Fig.4b). Further fix Laths A1 using 4no Pins (Fig.4c)
5. Insert Screw Eye into top of Finial E (Fig.5)
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, Hammer. 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Hanging Flower Bell is now complete.

www.zest4leisure.co.uk
1b1a
1c 2a
2b 3

www.zest4leisure.co.uk
4b4a
4c 5