Zest 4 Leisure Horizon Arch User manual

Assembly Instructions
(W x D x H) 1.8m x 1.3m x 2.00m
Product Name: Horizon Arch
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-08.14

Horizon Arch Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit, Tape
Measure.
Horizon Arch Pack List
Item Description Quantity
A Rail 2
B Rafter 5
C Post 4
D Trellis Panel 2
E Bracing 4
Fixings
70mm Screws 26
60mm Screws 12
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit,
Tape Measure.
Horizon Arch is now complete.
1. Position Rafters B at both ends of RailsA and fix using 4no 70mm Screws - 2 per
Rafter (Fig.1a). Space out remaining Rafters B equally (Fig.1b) and attach using
6no 70mm Screws.
2. Locate Post C onto Rail A as shown in Fig.2a (adjust width to suit). Fix in position
using 2no 70mm Screws.
3. Place Trellis Panel D 90mm from top of Post C and fix in position using 3no
60mm Screws (Figs.3a,3b & 3c).
4. Position second Post C as shown in Fig.4 and fix to RailA using 2no 70mm
Screws.
Fix Trellis Panel D to second Post C using 3no 60mm Screws.
Repeat stages 2 - 4 for remaining Posts & Trellis Panel on opposite side of arch.
5. Ensuring Post C is perpendicular to Rail A, position Bracing E as shown in Fig.5
and fix using 2no 70mm Screws.
Repeat procedure for remaining bracings.

www.zest4leisure.co.uk
1b1a
2a 3a
3b 3c
4 5