Zest 4 Leisure Pergola Arch User manual

Assembly Instructions
(W x D x H) 2.10m x 0.80m x 2.13m
Product Name: Pergola Arch
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-08.14

Pergola Arch Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit, Tape
Measure.
Pergola Arch Pack List
Item Description Quantity
A Rafter 4
B Rail 2
C Post/TrellisAssembly 2
D Bracing 4
Fixings
90mm Screws 8
60mm Screws 16
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit,
Tape Measure.
Pergola Arch is now complete.
1. Position Rafters A 155mm from both ends of Rails B and fix using 4no 60mm
Screws - 2 per Rafter (Fig.1a). Space out remaining RaftersA equally (Fig.1b)
and attach using 4no 60mm Screws.
4. Locate Rail/RafterAssembly into post slots and fix into position using 2no 60mm
screws per post (Figs.2a & 2b).
5. Ensuring Post/TrellisAssemblies C are perpendicular to Rails B, attach Bracings
D to posts and Rails B, using 8no 90mm Screws –2no per Bracing (Figs.3a &
3b).

www.zest4leisure.co.uk
1b1a
2a 2b
3a 3b