Zest 4 Leisure Ben Nevis Obelisk User manual

Assembly Instructions
(W x D x H) 0.60m x 0.60m x 2m
Product Name: Ben Nevis Obelisk (TG)
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 Option 1 –[e-mail]
V2-08.14

Ben Nevis Obelisk Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozidrive Bit/Screwdriver, 3mm Drill Bit.
Ben Nevis Obelisk Pack List
Item Description Quantity
A Side Panel 4
B Cap 1
Fixings
40mm Screws 20
www.zest4leisure.co.uk
Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] Option 1 or email:
[e-mail]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozidrive Bit/Screwdriver, 3mm Drill Bit.

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] Option 1 or email:
[e-mail]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozidrive Bit/Screwdriver, 3mm Drill Bit.
1. Align two Side Panels (A) together and pre-drill as shown by arrows in Fig 1a. Fix
together using 4no 40mm screws. Repeat to attach subsequent panels to form a
square (tapered) obelisk.
2. Locate Cap (B) into top of obelisk and fix in position using 4no 40mm screws
(See Figs 2a & 2b).
Ben Nevis Obelisk is now complete.
1a
1c
1b
2a
2b
www.zest4leisure.co.uk