ZIGBEE 206 User manual

PB206 Panic Button
Quick Start Guide

2
Introduction
1
The PB206 ZigBee Panic Button is used to send panic
alarm to the mobile app by simply pressing the button
on the controller.
This guide will provide you with an overview of the
product and help you get through the initial setup.

3
2Get to know your device
1. Panic button
• Send Alarm. Press to send the panic alarm to the
mobile app.
1

4
6
6. Battery compartment
Insert battery here to power on the panic button.

5
7
8
7. Lock button
You can lock/unlock the panic button by switching the
side lock (you cannot use the panic button when it is
locked).
8. Reset button
Press and hold the reset button for ten seconds until
the LED indicator flash green once to restore the panic
button to default factory setting.

6
3Get started
3.1 To get started, you will need:
A SEG-X3 Smart Gateway
The SmartOWON mobile app.
3.2 Connect to gateway’s network
1. Set your gateway to permit joining.
2. Power on the panic button. Press the reset button
once and the LED indicator will flash red for three
times indicating the panic button is ready to join the
gateway's network.
3. The panic button will join the gateway’s network
automatically. The LED indicator will flash green for
three times when it has successfully joined.
4. Now you can use the panic button in your system.

7
4Technical Specifications
Battery • CR2450V 850Mah Lithium battery
Working
Temperature • -10°C~+45°C
Humidity • <=85%RH
Networking Mode • ZigBee 2.4GHz IEEE 802.15.4
Networking
Distance
• Outdoor/Indoor range:
(100m/30m)
Operating Ambient
• Temperature: -10~45°C
• Humidity: up to 85%
non-condensing
Dimensions • 37.6(W) x 75.66(L) x 14.48(H) mm
Weight • 31 g

8
5Safety Notice
WARNING: Failure to follow these safety notices
could result in fire, electric shock, other injuries, or
damage to the panic button and other property. Read
all the safety notices below before using the panic
button.
• Avoid high humidity or extreme temperatures.
• Avoid long exposure to direct sunlight or strong
ultraviolet light.
• Do not drop or expose the unit to intense vibration.
• Do not disassemble or try to repair the unit yourself.
• Do not expose the unit or its accessories to
flammable liquids, gases or other explosives.