Zigen SW-41Plus User manual

1 of 4
SW-41 Plus Quick Start Guide
QS-002-0001-000-00 | December 26, 2019
© 2019 Zigen Corporation
www.zigencorp.com
Read this quick start guide carefully before using the
product. Pictures shown in this document are for
reference only. Different models and specifications
are subject to real product. Refer to the SW-41 User
Manual for more details on installing, configuring,
and operating the SW-41Plus 4 x 1 HDMI 2.0 Switch.
Important Downloads
Download the latest documents from the product
page of the zigencorp.com website. The product page
contains the latest documents to ensure a successful
deployment of SW-41Plus. Important documents
include:
 SW-41 Quick Start Guide
 SW-41 User Manual
Packing List
1x SW-41Plus 4 x 1 HDMI 2.0 Switch
1x Universal 100-240 VAC, 12V/1A Power Supply
1x IR Remote Control with CR2025 battery
1x RS-232 Cable (male DB9 to female DB9)
2x Wall Mounting Ears including Hardware
2x Rack Mounting Ears (1/2 Rack Height)
4x Plastic Cushions
1x Quick Start Guide
Overview
The SW-41Plus is an HDMI 2.0 switch with four inputs
and one output. The unit can be configured to
connect any of the four inputs to the single output.
The device supports video formats up to 4K UHD (up
to 2160p60 @ 4:4:4) with support for HDCP 2.2 or 1.4
content protection.
The SW-41Plus features SPDIF and Unbalanced RCA
Left/Right audio outputs extracted from the selected
HDMI input. The RCA Outputs support 2 channel PCM
while the SPDIF output supports 2 channel PCM and
surround sound including Dolby Digital, DTS, and DTS-
HD. Audio Return Channel (ARC) is supported on
HDMI input #1 only.
The SW-41Plus can be configured with the included IR
Remote Control to select any inputs to the output.
The unit can also be controlled with a third party
control system using bi-directional RS-232, IR, or
Ethernet. With Ethernet, the ZigNet full web
interface allows extensive device control including
advanced EDID management and system diagnostics.
Refer to the SW-41Plus User Manual for more
information.
Connections
The SW-41Plus video, audio, and control ports should
be connected first before applying power to the unit.
The use of professional grade cables are highly
desired for successful deployment. When viewing
UHD 60p 4:4:4 or UHD 60p HDR 4:2:2, Zigen highly
recommends the use of 4K Premium certified HDMI
cables. Zigen offers these premium certified cables in
varying lengths from 3 meters to 9 meters.
SW-41Plus
4 x 1 HDMI 2.0 Switch
Quick Start Guide

2 of 4
SW-41 Plus Quick Start Guide
QS-002-0001-000-00 | December 26, 2019
© 2019 Zigen Corporation
www.zigencorp.com
IR Sensor
This sensor is used for the IR Remote Control
(included). When pressing the Remote Control
buttons, aim the Remote Control in this window.
HDMI Selection Buttons
These illuminated buttons are used to select which of
the four HDMI Inputs are to be routed to the HDMI
Output. Both video and embedded audio will be
routed. The selected button will illuminate blue.
Power Button
Pressing this illuminated button will toggle between
Active Mode (Blue) and Stand-By Mode (Red).
In low power Stand-By Mode, no video will be present
at the output and the audio will be muted. However,
administration through the Ethernet port will still be
active to wake up the SW-41Plus.
HDMI Inputs
Connect the video sources to any of the four HDMI
inputs, which corresponds to the HDMI Selection
buttons 1-4 located in the front. Input #1 supports
Audio Return Channel (ARC), and by default, should
be connected to an Audio/Video Receiver (AVR).
HDMI Output
Connect a display to this HDMI Output. One of the
selected inputs will route video and embedded audio
to this output. If ARC is enabled and HDMI input #1 is
selected, audio sourced from the display will be
passed through to HDMI input #1.
SPDIF (TOSLINK) Output
This SPDIF (TOSLINK) optical port will output the
embedded audio from the selected HDMI input. The
SPDIF output supports 2-Channel PCM as well as
surround sound formats like DOLBY Digital and DTS.
Unbalanced Analog Audio RCA Outputs
The RCA Left/Right connectors will output analog
audio from the selected HDMI input. Only 2-Channel
PCM audio format is supported. If the source is
outputting any surround sound formats, these analog
outputs will be muted.
RS-232 Connection
An RS-232 connection is typically connected to a 3rd
party control system to
configure the SW-41Plus.
The default settings are:
Baud Rate: 115,200
Data Bits: 8 | Stop Bits: 1
Parity: None | Flow Control: None
Note: Refer to the SW-41Plus User Manual for a
complete description of the RS-232 control protocol.
IR Input Connection
The IR Input Plug can be connected to an IR Receiver
(3-pin Jack, 5V) or
any 3rd party Control
System (2-pin Jack).
The pin out for the
IR connectors are as
follows:
GND (
5)
TX
(
2
)
RX
(
3
)
IR INPUT (2 or 3 pin support)
IR In
+5VDC
GND
IR In
GND
1
2
3
5
6
7
8
9
10
1
1
4
Overview
1
2
3
4
5
6
7
8
9

3 of 4 © 2019 Zigen Corporation
www.zigencorp.com
SW-41 Plus Quick Start Guide
QS-002-0001-000-00 | December 26, 2019
Ethernet LAN Port
The Ethernet LAN port is a 100 Base-T connection to
any router, switch, or directly to a computer. The SW-
41Plus features a web interface, called ZigNet.
Hardware configuration, EDID management, and
advanced diagnostics can all be accessed through
ZigNet.
Note: Refer to the SW-41Plus User Manual for a
complete explanation of ZigNet.
Power
The SW-41Plus requires 12VDC @ 1Amp to power the
unit. Use the included power adaptor and ensure the
locking ring is threaded snugly to prevent inadvertent
disconnection of the power jack. Make sure all
video, audio, and control ports are properly
connected before applying power to the SW-41Plus.
Specifications
Video Connection
HDMI 2.0
b
Content Protection
HDCP 1.4
|
2.2
Maximum Video Resolution
4K60P UHD 4:4:4, 4K60P UHD 4:2:2 HDR
Maximum HDMI Bandwidth
17.82 Gbps
Color Space Support
RGB, YUV
YUV
Subsampling
4:4:4, 4:2:2, 4:2:0
Full Color Depth
8 bits, 10 bits, 12 bits
High Dynamic Range (HDR)
Dolby Vision | HDR10+ | HDR10 | HLG
Audio Format (HDMI Output)
7.1 Channel PCM, Dolby Digital, Dolby TrueHD, DTS, DTS
-
HD
Audio Format (SPDIF
Output)
PCM, Dolby Digital, DTS
5.1
Audio Format (RCA Output)
2
-
Channel PCM
Audio DSP (RCA Output)
Volume Attenuation, Tone Control Bass/
Treble
, Balance Left/Right, 5
-
Band
Equalizer, Equalizer Presets, and Surround Sound Effects
IR Remote Control

RS
-
232 Port

IR Input Port (2 or 3 Pins)

Ethernet Port

ZigNet Administration

EDID Management

Advanced Diagnostics

CEC

ARC (HDMI Input
#
1)

Low Power Standby Mode

Power
12VDC
@
1A, Center pin hot
Dimensions
273.08
mm x
21.84
mm
x 93.98mm | 10.75 inches x 0.86 inches x 3.7 inches
Weight
635 grams | 1.4 pounds
Temperature
0
°
to
4
0
°
C (10%
-
90% Non
-
Condensing Humidity)
| 32
°
to 104
°
F
Regulatory Safety and Emissions
CE | FCC | RoHS
Overview
10
1
1

4 of 4 © 2019 Zigen Corporation
www.zigencorp.com
SW-41 Plus Quick Start Guide
QS-002-0001-000-00 | December 26, 2019
Powered Product Warranty
Zigen warrants its powered products against any defects in materials and workmanship for a period of three years
from the date of invoice. Touchscreen displays carry a one year parts and labor warranty. If a malfunction occurs
during the warranty period, Zigen will repair or replace a product to its original operating condition. A return
authorization number must be obtained from Zigen before products are returned for service.
Non-Powered and Cable Products - Lifetime Limited Performance Warranty
Zigen warrants that its non-powered products and cable products will be free from defects in material and
workmanship for as long as you or your customer owns the product. All Zigen non-powered products and cables
are designed and engineered to meet and exceed performance specifications. If, at any time, the product fails due
to manufacturer defect, Zigen will repair or replace the product to ensure that it meets original performance
specifications. Reduced performance due to normal wear and tear, or damages caused by misuse or negligence will
not be covered. Zigen will test and evaluate all non-powered and cable products claimed defective. Products must
be shipped to Zigen, prepaid along with proof of purchase only after obtaining a Return Merchandise Authorization
(RMA) number from Zigen. This statement of policy is in lieu of any other policy expressed or implied and no
representative or person is authorized to assume any other liability or adopt any other policy for Zigen without our
written consent.
Return Policy
If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund, less shipping
and handling. Zigen will not be responsible for shipping and handling of product returns. Returns will only be
accepted of products with proof of purchase, products in the original packaging with zero to minimal use and a
Return Merchandise Authorization RMA number provided by Zigen.
Warranty Information