ZKaccess InBio Pro User manual

Quick Start Guide
InBio Pro
+
ZKBioSecurity 3.0

1
InBio Pro and ZKBioSecurity 3.0 Quick Start Guide
CONTENT
What’s in the Box......................................................................2
Optional Accessories.............................................................3
Safety Precautions....................................................................4
Product PIN Diagram.............................................................5
LED Indicators.............................................................................6
Product Dimension.................................................................7
Installation of Panel & Cabinet........................................8
Wiring Legend............................................................................9
Power Wiring Diagram .....................................................10
Without Backup Battery...................................................... 10
With Backup Battery ............................................................ 10
RS485 Fingerprint Reader Connection..................11
DIP Switch Setting for RS485 Reader......................12
Wiegand Connection.........................................................13
REX Connections...................................................................14
Lock Connection ...................................................................15
Connecting a Lock with External Power Supply
(Dry Contact) ........................................................................... 15
Lock Connection ...................................................................16
Switching Dry Contact to Wet Contact ............................ 16
Lock Connection ...................................................................17
Normally Open Lock Powered From Lock Terminal
(Wet Contact) ........................................................................... 17
Normally Closed Lock Powered From Lock Terminal
(Wet Contact) ........................................................................... 17
Aux. I/O Connection ..........................................................18
Aux. Input Connection .......................................................... 18
Aux. Output Connection....................................................... 18
Ethernet Connection .........................................................19
LAN Connection...................................................................... 19
Direct Connection................................................................... 19
Restore Factory Setting.....................................................20
Restore factory setting........................................................... 20
Installation Diagram............................................................21
Troubleshooting ....................................................................22
Electrical Specifications ...................................................23
Specifications ..........................................................................24
ZKBioSecurity
Software
Installation and
Setup starts at
Page 25

2
InBio Pro and ZKBioSecurity 3.0 Quick Start Guide
What’s in the Box
4 Diodes2 Screws & Anchors 2 Screwdrivers

3
InBio Pro and ZKBioSecurity 3.0 Quick Start Guide
Optional Accessories
Wiegand Card Reader
ZK4500 Enrollment reader
RS485 Fingerprint Reader
Prox Card
CR10E Card Enroller
K1-1 Exit ButtonInBio Pro Cabinet

4
InBio Pro and ZKBioSecurity 3.0 Quick Start Guide
Safety Precautions
The following precautions are to keep users safe and prevent any damage.
Please read carefully before installation.
Do not install the device in a place subject to direct sunlight,
humidity, dust or soot.
Do not place a magnet near the product. Magnetic objects
such as magnets, CRTs, TVs, monitors or speakers may dam-
age the device.
Do not place the device next to heating equipment.
Be careful not to let liquid like water, drinks or chemicals
leak inside the device.
Do not let children touch the device without supervision.
Do not drop or damage the device.
Do not disassemble, repair or alter the device.
Do not use the device for any other purpose than specied.
Clean the device often to remove dust on it. In cleaning, do
not splash water on the device but clean it with a smooth
cloth or towel.
Contact your supplier in case of a problem.

5
InBio Pro and ZKBioSecurity 3.0 Quick Start Guide
Product PIN Diagram
4 Aux Inputs
State Indicator
#1 Door Card Reader
#1 Door Exit Button
RS485
Fingerprint Reader
#2 Door Card Reader
#2 Door Exit Button
#3 Door Card Reader
#3 Door Exit Button
#4 Door Card Reader
#4 Door Exit Button
4 Lock & Door Sensor 4 Aux Output
DIP Switches Ethernet Port
Lock Power
InBio Pro Power
LINK LED
ACT LED
SD Card Slot
Figure 1

6
InBio Pro and ZKBioSecurity 3.0 Quick Start Guide
LED Indicators
LINK Solid Green LED indicates TCP/IP
communication is normal.
Flashing (ACT) Yellow LED indicates
data communication is in progress.
EXT RS485 (TX/RX) Flashing Yellow
& Green LED indicates communication is
in progress.
Flashing (POWER) Red LED indicates
the panel is powered on.
Flashing (RUN) Green LED indicates
that panel is in normal working state.
Flashing (CARD) Yellow LED indicates
that the card is read by the panel.
Figure 2
Figure 3
Figure 4
Figure 5
Figure 7
Figure 6

7
InBio Pro and ZKBioSecurity 3.0 Quick Start Guide
Product Dimension
Figure 9
InBio160Pro InBio260Pro InBio460Pro
InBio Pro- Metal Cabinet
Figure 8
8.89 in
(226 mm)
7.125 in
(181 mm)
1.42 in (36 mm)
4.17 in (106 mm)
4.17 in (106 mm)
4.17 in (106 mm)
15.7 in (400 mm)
13 in
(330 mm)
3.56 in
(90.5 mm)

8
InBio Pro and ZKBioSecurity 3.0 Quick Start Guide
Installation of Panel & Cabinet
Cable Conduit
(Punch Hole for cables)
Temper Switch
InBio Pro Panel
Heat Dissipation Grill
Power Supply
Backup Battery
Mounting HolesState Indicators Inserting Panel to Rail
Mounting Rail
We recommend drilling the mounting plate screws into solid wood (i.e. stud/beam). If a
stud/beam cannot be found, then use the supplied drywall plastic mollies (anchors).
Step 1
Pass the cable through holes
Step 2
Mount the Metal Cabinet
Step 3
Insert the InBio Pro Panel as it
shown
Figure 10
Figure 11
1
2

9
InBio Pro and ZKBioSecurity 3.0 Quick Start Guide
Wiring Legend
Detector Ethernet Cable
IR Sensor
Exit Button Floodlight
Wiegand
Card Reader
Exit Button
Normally Open Lock
Normally Close Lock
Wiegand
Card Reader 12V DC Power Supply
12V DC Power
Figure 12
(Wet Power Input to Lock)