ZKTeco UHF10F Pro Reader User manual
P
r
o
duc
t
Na
m
e
a
n
d
M
o
d
e
l
Num
b
e
r
Us
er Ma
nu
a
l
P a
g
e
|
1
C
o
p
y
rig
h
t
©
2020
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
ese
r
v
ed
.
User Manual
UHF10F Pro Reader
Date: March 2021
Doc Version: 1.0
English
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposes only.
For further details, please visit our Company’s website
www.zkteco.com.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
1
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
Copyright © 2021 ZKTECO CO., LTD. All rights reserved.
Without the prior written consent of ZKTeco, no portion of this manual can be
copied or forwarded in any way or form. All parts of this manual belong to
ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
Trademark
is a registered trademark of ZKTeco. Other trademarks involved in
this manual are owned by their respective owners.
Disclaimer
This manual contains information on the operation and maintenance of the
ZKTeco equipment. The copyright in all the documents, drawings, etc. in
relation to the ZKTeco supplied equipment vests in and is the property of
ZKTeco. The contents hereof should not be used or shared by the receiver with
any third party without express written permission of ZKTeco.
The contents of this manual must be read as a whole before starting the
operation and maintenance of the supplied equipment. If any of the content(s)
of the manual seems unclear or incomplete, please contact ZKTeco before
starting the operation and maintenance of the said equipment.
It is an essential pre-requisite for the satisfactory operation and maintenance
that the operating and maintenance personnel are fully familiar with the
design and that the said personnel have received thorough training in
operating and maintaining the machine/unit/equipment. It is further essential
for the safe operation of the machine/unit/equipment that personnel has read,
understood and followed the safety instructions contained in the manual.
In case of any conflict between terms and conditions of this manual and the
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
2
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
contract specifications, drawings, instruction sheets or any other contract-
related documents, the contract conditions/documents shall prevail. The
contract specific conditions/documents shall apply in priority.
ZKTeco offers no warranty, guarantee or representation regarding the
completeness of any information contained in this manual or any of the
amendments made thereto. ZKTeco does not extend the warranty of any kind,
including, without limitation, any warranty of design, merchantability or
fitness for a particular purpose.
ZKTeco does not assume responsibility for any errors or omissions in the
information or documents which are referenced by or linked to this manual.
The entire risk as to the results and performance obtained from using the
information is assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any
incidental, consequential, indirect, special, or exemplary damages, including,
without limitation, loss of business, loss of profits, business interruption, loss
of business information or any pecuniary loss, arising out of, in connection
with, or relating to the use of the information contained in or referenced by
this manual, even if ZKTeco has been advised of the possibility of such
damages.
This manual and the information contained therein may include technical,
other inaccuracies or typographical errors. ZKTeco periodically changes the
information herein which will be incorporated into new
additions/amendments to the manual. ZKTeco reserves the right to add,
delete, amend or modify the information contained in the manual from time
to time in the form of circulars, letters, notes, etc. for better operation and
safety of the machine/unit/equipment. The said additions or amendments are
meant for improvement /better operations of the machine/unit/equipment
and such amendments shall not give any right to claim any compensation or
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
3
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
damages under anycircumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment
malfunctions due to any non-compliance of the instructions contained in this
manual (ii) in case of operation of the machine/unit/equipment beyond the
rate limits (iii) in case of operation of the machine and equipment in conditions
different from the prescribed conditions of the manual.
The product will be updated from time to time without prior notice. The latest
operation procedures and relevant documents are available on
http://www.zkteco.com
If there is any issue related to the product, please contact us.
ZKTecoHeadquarters
Address ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone
+86 769 - 82109991
Fax +86 755 - 89602394
For business related queries, please write to us at: sales@zkteco.com.
To know more about our global branches, visit www.zkteco.com.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
4
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
About theCompany
ZKTeco is one of the world’s largest manufacturer of RFID and Biometric
(Fingerprint, Facial, Finger-vein) readers. Product offerings include Access
Control readers and panels, Near & Far-range Facial Recognition Cameras,
Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR)
gate controllers and Consumer products including battery-operated
fingerprint and face-reader Door Locks. Our security solutions are multi-
lingual and localized in over 18 different languages. At the ZKTeco state-of-
the-art 700,000 square foot ISO9001-certified manufacturing facility, we
control manufacturing, product design, component assembly, and
logistics/shipping, all under one roof.
The founders of ZKTeco have been determined for independent research and
development of biometric verification procedures and the productization of
biometric verification SDK, which was initially widely applied in PC security
and identity authentication fields. With the continuous enhancement of the
development and plenty of market applications, the team has gradually
constructed an identity authentication ecosystem and smart security
ecosystem, which are based on biometric verification techniques. With years
of experience in the industrialization of biometric verifications, ZKTeco was
officially established in 2007 and now has been one of the globally leading
enterprises in the biometric verification industry owning various patents and
being selected as the National High-tech Enterprise for 6 consecutive years. Its
products are protected by intellectual property rights.
Aboutthe Manual
This manual introduces the operations of UHF10 Pro Reader.
All figures displayed are for illustration purposes only. Figures in this manual
may not be exactly consistent with the actual products.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
5
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
Table of Contents
1 OVERVIEW.............................................................................................6
2
SIDE VIEW & WIRING
..................................................................................
7
3 SPECIFICATIONS.................................................................................... 8
4 DIMENSIONS.........................................................................................9
5 SOFTWARE CONFIGURATION.............................................................. 9
INTRODUCTION.................................................................................................10
5.1.1
MAIN INTERFACE............................................................................................. 10
5.1.2
RS485 SETTING INTERFACE.............................................................................. 14
5.1.3
SYSTEM SETTINGS..........................................................................................16
6 ACCESS CONTROLLER CONNECTION.................................................18
7 INSTALLATION PROCEDURE...............................................................19
8
WIRING DIAGRAM
....................................................................................
21
9 FAQ.......................................................................................................21
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
6
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
1Overview
UHF10 Pro is the ZKTeco’s third generation UHF reader which has a more stable
performance, longer reading distance and faster recognition speed. It is
equipped with a passive UHF card, which could be widely used in Vehicle
management and Personnel management applications. The product also
meets the CE, FCC technology requirements, and yet to obtain the CE, FCC, and
other security certifications.
UHF10F Pro
Antennaoperatingfrequency
Malaysian Frequency :919.5-923.0MHz
Card reading range
UHF10F Pro hand-held test up to 20m, driving car test around 8m
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
7
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
2Side View &Wiring
M
o
u
nt
i
ng
B
r
ack
e
t
C
a
bl
es
U
SB
No.
Colour
Connection
1
Red
DC +12V
2
Black
GND
3
Green
Wiegand D0
4
White
Wiegand D1
5
Purple
Trigger Point
6
Gray
GND
7
USB
Connect to PC
8
Brown
RS485+
9
Orange
RS485-
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
8
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
3Specifications
Model
UHF10F Pro
Reading Distance
10 to 20meters (Hand-held test)
Actual scenario test is around 8m
AntennaGain
12dBi
Dimension
445*445*67.5mm
Weight
3kg
Power
1.2 to 4.5 W
Frequency
919.5-923.0MHz (supports adjustment)
Communication
interface
Wiegand; RS485; USB Configuration
parameters(Wiegand, RS485 requires one
of the two
options)
Interface Protocol
EPC global UHF Class 1 Gen 2 / ISO 18000-6C
Working Mode
Read Always (Default) & Read by Trigger
Output Power
19dBm to 30dBm
Protection Class
IP66
WorkingVoltage
DC 9 to15V
Working Temperature
and Humidity
-20℃to 65℃, <85%
Storage Temperature
and Humidity
-20℃to 80℃, <85%
RS485 Communication
Optional baud rate (9600, 19200, 38400,
57600,
115200). The default is 115200
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
9
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
4Dimensions
UHF10F Pro:
5Software Configuration
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
10
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
Introduction
5.1.1 Main Interface
Take the operation of the American standard reader as an example:
Reader Connection
Click
Connect
to connect the Reader, and click
Disconnect
to disconnect the
Reader.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
11
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
Work Mode Configuration
Click
Read Always
to make the Reader always in the read status. Click
Read by
Trigger
to enable the reader to read only after it is triggered.
RF Settings
The RF Settings helps to set the Power and Frequency values.
Buzzer
Select the
Buzzer
check box to enable the Buzzer.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
12
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
Wiegand Output Setting
The Wiegand Output Settings consist of Forward Output and Inverted Output.
Click
Forward Output
to read the card number in the partition in the
progressive order, and click
Inverted Output
to read out the card number in
the partition in the reverse order (customers need not set).
Output Duration Setting
The time of continuous output signal of the reader can be set, and the
maximum setting time is 1s.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
13
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
Wiegand Format Setting
The default Wiegand format is WG26, and it can be set as WG34, WG42, WG50,
WG58,WG66, WG74, WG82,WG90,WG98.
Card Reading IntervalSetting
Youcan set the card reading interval to prevent the repeated card reading.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
14
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
5.1.2 RS485 Setting Interface
The controllers supported by default are inbio260 and inbio460.
Baud RateSetting
The default Baud rate is 96000 and it can be adjusted as per the requirements.
Device Address Setting
The Device Address Setting is used to distinguish the readers which are
installed in different locations.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
15
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
RS485WorkingMode
Select
Polling Mode
to send a command to search for cards, and the reader
will reply to the corresponding data after receiving the card search command.
Select
Auto Work
to read the card and automatically upload the data to the
Controller.
RS485OutputMode
The RS485 Output Settings consist of Forward Output and Inverted Output.
Click
Forward Output
to read the card number in the partition in the
progressive order, and click
Inverted Output
to read out the card number in
the partition in the reverse order.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
16
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
5.1.3 System Settings
LEDLightSetting
The LED indicator color can be set in the
Standby Status
and the
Read Card
Status. There are seven colors to choose.
System Settings
Set the location of the data import and export.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
17
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
CardReader Output
There are 3 Card Reader output modes namely Wiegand Mode, RS485 mode
and TCP/IPmode.
Language Settings
Right click in the blank area of the Demo interface, a pop-up appears as shown
below, click
Language Settings
to select the language.
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
18
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
6Access Controller Connection
U
H
F10 P
r
o
R
e
a
d
e
r
Us
er Ma
nu
a
l
P a
g
e
|
19
C
o
p
y
r
i
g
h
t
©
2021
Z
K
TE
C
O
C
O
.,
L
T
D
.
All
r
ig
h
t
s
r
es
er
v
ed
.
7Installation Procedure
1.
Please install the directional antenna with a lower elevation angle of
60° to 75° to suit the correct line ofsight.
Note:
Please install the reader as shown in the above picture. The facing direction of
the reader and the travel direction of the vehicle must be in a straight line. The
distance between the reading head and the parking barrier must be
maintained at 50cm or more.
2.
Avoid installing the reader opposite to each other.
Table of contents
Other ZKTeco Card Reader manuals
Popular Card Reader manuals by other brands
ddm hopt+schuler
ddm hopt+schuler 862-A22S1U027B0 setting the signs
Rosslare
Rosslare AY-x20 Series installation manual
Sharkoon
Sharkoon Media Reader IV USB 3.0 manual
Alcor
Alcor AU9321 Technical reference manual
maktar
maktar Qubii user manual
AMAG Technology
AMAG Technology S842 Installation and user instructions