ZKTeco ZK-D1065TDM User manual

Product Name and Model Number User Manual
Page | 1 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Thank you for choosing our product. Please read the instructions
carefully before operation. Follow these instructions to ensure that the
product is functioning properly. The images shown in this manual are for
illustrative purposes only.
For further details, please visit our Company’s website
www.zkteco.com.
User Manual
Walk Through Metal Detector
ZK-D1065TDM
Date: March 2021
Doc Version: 1.0
English

ZK-D1065TDM User Manual
Page | 1 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Copyright © 2021 ZKTECO CO., LTD. All rights reserved.
Without the prior written consent of ZKTeco, no portion of this manual can
be copied or forwarded in any way or form. All parts of this manual belong to
ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
Trademark
is a registered trademark of ZKTeco. Other trademarks involved
in this manual are owned by their respective owners.
Disclaimer
This manual contains information on the operation and maintenance of the
ZKTeco equipment. The copyright in all the documents, drawings, etc. in
relation to the ZKTeco supplied equipment vests in and is the property of
ZKTeco. The contents hereof should not be used or shared by the receiver
with any third party without express written permission of ZKTeco.
The contents of this manual must be read as a whole before starting the
operation and maintenance of the supplied equipment. If any of the
content(s) of the manual seems unclear or incomplete, please contact ZKTeco
before starting the operation and maintenance of the said equipment.
It is an essential pre-requisite for the satisfactory operation and maintenance
that the operating and maintenance personnel are fully familiar with the
design and that the said personnel have received thorough training in
operating and maintaining the machine/unit/equipment. It is further
essential for the safe operation of the machine/unit/equipment that
personnel have read, understood and followed the safety instructions
contained in the manual.

ZK-D1065TDM User Manual
Page | 2 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
In case of any conflict between terms and conditions of this manual and the
contract specifications, drawings, instruction sheets or any other
contract-related documents, the contract conditions/documents shall prevail.
The contract specific conditions/documents shall apply in priority.
ZKTeco offers no warranty, guarantee or representation regarding the
completeness of any information contained in this manual or any of the
amendments made thereto. ZKTeco does not extend the warranty of any
kind, including, without limitation, any warranty of design, merchantability or
fitness for a particular purpose.
ZKTeco does not assume responsibility for any errors or omissions in the
information or documents which are referenced by or linked to this manual.
The entire risk as to the results and performance obtained from using the
information is assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any
incidental, consequential, indirect, special, or exemplary damages, including,
without limitation, loss of business, loss of profits, business interruption, loss
of business information or any pecuniary loss, arising out of, in connection
with, or relating to the use of the information contained in or referenced by
this manual, even if ZKTeco has been advised of the possibility of such
damages.
This manual and the information contained therein may include technical,
other inaccuracies or typographical errors. ZKTeco periodically changes the
information herein which will be incorporated into new
additions/amendments to the manual. ZKTeco reserves the right to add,
delete, amend or modify the information contained in the manual from time
to time in the form of circulars, letters, notes, etc. for better operation and
safety of the machine/unit/equipment. The said additions or amendments
are meant for improvement /better operations of the
machine/unit/equipment and such amendments shall not give any right to

ZK-D1065TDM User Manual
Page | 3 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
claim any compensation or damages under any circumstances.
ZKTeco shall in no way be responsible (i) in case the
machine/unit/equipment malfunctions due to any non-compliance of the
instructions contained in this manual (ii) in case of operation of the
machine/unit/equipment beyond the rate limits (iii) in case of operation of
the machine and equipment in conditions different from the prescribed
conditions of the manual.
The product will be updated from time to time without prior notice. The
latest operation procedures and relevant documents are available on
http://www.zkteco.com
If there is any issue related to the product, please contact us.
ZKTeco Headquarters
Address ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone +86 769 - 82109991
Fax +86 755 - 89602394
For business related queries, please write to us at: [e-mail].
To know more about our global branches, visit www.zkteco.com.

ZK-D1065TDM User Manual
Page | 4 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
About the Company
ZKTeco is one of the world’s largest manufacturer of RFID and Biometric
(Fingerprint, Facial, Finger-vein) readers. Product offerings include Access
Control readers and panels, Near & Far-range Facial Recognition Cameras,
Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR)
gate controllers and Consumer products including battery-operated
fingerprint and face-reader Door Locks. Our security solutions are
multi-lingual and localized in over 18 different languages. At the ZKTeco
state-of-the-art 700,000 square foot ISO9001-certified manufacturing facility,
we control manufacturing, product design, component assembly, and
logistics/shipping, all under one roof.
The founders of ZKTeco have been determined for independent research and
development of biometric verification procedures and the productization of
biometric verification SDK, which was initially widely applied in PC security
and identity authentication fields. With the continuous enhancement of the
development and plenty of market applications, the team has gradually
constructed an identity authentication ecosystem and smart security
ecosystem, which are based on biometric verification techniques. With
years of experience in the industrialization of biometric verifications, ZKTeco
was officially established in 2007 and now has been one of the globally
leading enterprises in the biometric verification industry owning various
patents and being selected as the National High-tech Enterprise for 6
consecutive years. Its products are protected by intellectual property rights.
About the Manual
This manual introduces the operations of ZK-D1065TDM Walk-through
Metal Detector.
All figures displayed are for illustration purposes only. Figures in this manual
may not be exactly consistent with the actual products.

ZK-D1065TDM User Manual
Page | 5 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Document Conventions
Conventions used in this manual are listed below:
GUI Conventions
For Software
Convention Description
Bold font Used to identify software interface names e.g. OK, Confirm, Cancel
> Multi-level menus are separated by these brackets. For example, File >
Create > Folder.
For Device
Convention Description
< > Button or key names for devices. For example, press <OK>
[ ] Window names, menu items, data table, and field names are inside
square brackets. For example, pop up the [New User] window
/ Multi-level menus are separated by forwarding slashes. For example,
[File/Create/Folder].
Symbols
Convention Description
This implies about the notice or pays attention to, in the manual.
The general information which helps in performing the operations
faster.
The information which is significant.
Care taken to avoid danger or mistakes.
The statement or event that warns of something or that serves as a
cautionary example.

ZK-D1065TDM User Manual
Page | 6 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Table of Contents
1 OVERVIEW .................................................................................................. 8
INTRODUCTION ........................................................................................................................8
APPEARANCE ...........................................................................................................................8
COMPONENTS..........................................................................................................................9
2 PRODUCT SPECIFICATIONS.....................................................................10
DIMENSIONS .........................................................................................................................10
TECHNICAL SPECIFICATIONS.................................................................................................11
3 INSTALLATION SETUP..............................................................................12
SAFETY PRECAUTIONS..........................................................................................................12
INSTRUCTIONS TO PEDESTRIANS ..........................................................................................13
INSTALLATION SITE................................................................................................................14
3.3.1 STATIONARY METALLIC ITEMS ............................................................................................. 14
3.3.2 PORTABLE METALLIC ITEMS.................................................................................................. 14
3.3.3 FLOOR VIBRATION ....................................................................................................................14
3.3.4 ELECTROMAGNETIC RADIATION AND INTERFERENCE................................................ 14
3.3.5 PARALLEL INSTALLATION....................................................................................................... 15
INSTALLATION STEPS.............................................................................................................15
4 PERFORMANCE AND TECHNICAL FEATURES..........................................17
5 CONTROL PANEL......................................................................................18
6 DETECTION ZONES ..................................................................................20
ADJUSTMENT OF DETECTION ZONE’S SENSITIVITY ............................................................. 21
7 OPERATIONAL PROCEDURE ....................................................................22
SENSITIVITY ADJUSTMENT....................................................................................................22
OPERATING FREQUENCY.......................................................................................................23

ZK-D1065TDM User Manual
Page | 7 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
BUZZER SETTINGS.................................................................................................................23
ALARM TIME .........................................................................................................................24
DATE AND TIME ....................................................................................................................24
SENSITIVITY RANGE ..............................................................................................................25
APPLICATION AREA...............................................................................................................25
DATA STORAGE .....................................................................................................................26
LOGIN PASSWORD ................................................................................................................26
RESTORE .............................................................................................................................27
DEFAULT PARAMETERS......................................................................................................27
TROUBLESHOOTING...................................................................................28
PACKING LIST..............................................................................................29
WARRANTY CARD.......................................................................................30

ZK-D1065TDM User Manual
Page | 8 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
1Overview
Introduction
ZK-D1065TDM is a walk-through metal detector that can assist in body
temperature measurement at the forehead and wrist of passengers.It
integrates the box of TDM95E. When people pass through the device, put the
hand or wrist 3-5cm away from the TMD95E can measure the temperature. If
the temperature detected is over 37.3°C, ZK-D1065TDM will raise an alarm to
inform the guards. Then the security personnel can find the fever person by
the voice of beep.
Appearance

ZK-D1065TDM User Manual
Page | 9 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Components
1. Beam 2. LED Alarm Zones 3. Built-in Probe
4. Infrared Sensors 5. TDM95E 6. Power-line Interface
2
3
4
5
6
1

ZK-D1065TDM User Manual
Page | 10 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
2Product Specifications
Dimensions

ZK-D1065TDM User Manual
Page | 11 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Technical Specifications
Feature Specifications
Power Supply AC100V ~ 240V
Working Frequency 5.7KHz ~ 9.6KHz
Input Voltage DC12V
Working Current 1.4A
Running Power 16W
Weight with Packing 41KG
Dimension (H*W*L) 2213 * 831 * 471 (mm)
Dimension with Packing (H*W*L) 2280 * 282 * 560 (mm)
Temperature Detection Distance 3 - 5cm
Temperature Sensor Type IR temperature sensor
Temperature Measurement Range 32.0°C - 42.9°C / 89.6°F - 109.22°F
Temperature Measurement
Deviation ±0.3°C / ±0.54°F
Temperature Measurement Point Forehead or wrist
Digital Display Tube 4
Operating Temperature 15°C - 35°C / 59°F - 95°F
Operating Humidity 10% - 85%
Height of Temperature Sensor from
the Ground 1.3m

ZK-D1065TDM User Manual
Page | 12 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
3Installation Setup
Safety Precautions
•Install the detector in a stable and smooth area. Make sure that the
detector is installed firmly in the selected area.
•It can be used for both indoor and outdoor purposes. If used outdoor,
cover it with a canopy to protect against rain.
•Before installation, make sure the left and right door panels and the
TDM95E are placed at the corresponding location. Avoid high
temperatures and wet environments.
•Wait for 1 minute for the self-diagnosis of the detector when it starts.
Do not touch the detector during a security check to avoid false
alarm.
•Install the detector away from radio-frequency devices to avoid
interference. Make sure that there is no large metal object or strong
magnetic field around the detector for at least 2 meters.
•Do not hit the detector hardly, as it may cause false alarms.
•Do not disassemble the unit without the guidance of a professional
technician.
•Each device has a warranty card, with which users can have their
devices maintained or repaired free of charge within the warranty
period.
•Do not expose the device to sunlight or heat flame, hit or drop the
device ,also avoid contact with water.
•Sweating, clothing, or scarves on the palm or wrist can affect the
accuracy of the measurement.
•This is not a medical device and data cannot be used for medical
purposes. It is only used for body temperature screening.

ZK-D1065TDM User Manual
Page | 13 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Instructions to Pedestrians
•A line must be drawn at 50cm away from the detector. The
pedestrians must pass through the detector one-by-one.
•Pedestrians should line up one-by-one to ensure the smooth
operation of the detector and detect the temperature by put your
hand on the detector.
•Pedestrians should walk at a normal speed. They must not
intentionally form a crowd, rush, walk slowly, or crush the door panel.
•Before passing through the metal detector, the pedestrians must
remove all the carried metal objects (such as keys, mobile phone,
watch, coins, etc.), and place it on the security chute or a table, and
pick it up after the security check.
•If the detector alarms when someone passes through, that means
there is/are some metal object(s) hidden in the body. The security
guard can use a hand-held metal detector to accurately detect the
hidden position according to the alarm zones.
•When a person places his/her wrist or palm in front of the device
within the specified measuring distance the temperature
measurement program is triggered and the output is displayed.
•When the temperature measured is within the normal value range i.e.
below 37.3°C, the green LED light turns on for a second and the
buzzer beeps once.
•When the measured temperature crosses 37.3°C, the red LED light
glows for a longer time, and the buzzer also beeps thrice. While the
buzzer is alarming and the next temperature measurement is
triggered, the current high-temperature alarm is interrupted.
•The temperature value is displayed in four digit value. If the digital
display has no new temperature trigger for 10 sec, then “---” is
displayed.
Measuring Range : 32.0°C to 42.9°C

ZK-D1065TDM User Manual
Page | 14 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Measuring Accuracy : ±0.3°C
Measuring Distance : 3cm-5cm.
Installation Site
The following section describes the requirements of the installation
environment.
3.3.1 Stationary Metallic Items
The detector must be installed away at 50cm from the stationary metallic
items such as aluminum alloy/stainless-steel windows, doors, etc. to prevent
false alarms and affecting the sensitivity of the detector.
3.3.2 Portable Metallic Items
The portable metallic objects must be kept away at 2 meters from the
detector to avoid false alarms.
3.3.3 Floor Vibration
The installation floor must be flat and fixed to avoid false alarm from the
movement of the people walking through the detector.
3.3.4 Electromagnetic Radiation and Interference
Since the detector uses Bilateral receiver technology, the detector must be
installed away at a distance of at least 1 meter from the sources of
electromagnetic radiation or electromagnetic interference. The parameters
that define the distance are determined by the installation environment and
the parameters vary for different installation environments.
The sources of electromagnetic radiation and electromagnetic interference
are given below:
Electrical Control Box, Radiofrequency equipment, Interphone, High Power
Motor, Power Transformer, Ac Power Lines, Thyristor Control Circuit (High
Power Switching Power Supply, Inverter Welder), Engine, Motor, etc.

ZK-D1065TDM User Manual
Page | 15 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
3.3.5 Parallel Installation
When two detectors are installed parallel to each other, the distance between
two detectors must be greater than 50cm. When three detectors are installed
parallel to each other, the distance between each detector must be greater
than 80cm. They must operate at a different frequency to avoid interference.
The distance varies according to the actual working environment, it is not
recommended to mount three detectors in parallel, the frequency can be
adjusted according to the environment.
Installation Steps
Make sure that the device is installed as per the following installation
instructions. If you want to open the chassis, you should contact the agent
for permission. Otherwise, you will bear any consequence resulting from your
actions.
Back of
ZK-D1065TDM TDM95E is installed in
here
Left Door Panel Right Door Panel

ZK-D1065TDM User Manual
Page | 16 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
•Open the Control unit and Door panel package.
•Install the control unit and the door panels as shown in the above
diagram. Connect the door panels to the control unit with bolts and
nuts and tighten the screws.
•There are a cable from the control unit to the holder, Fiirst ,connect
to the TDM95E via USB cable.And put the TDM95E to the holder.
•Insert the probe-lines of the left and right door panels to the
corresponding sockets on the mainboard.
•Then lift the Walk-through metal detector vertically and place it in
the required area.
•Finally, plug in the power cable to start working.

ZK-D1065TDM User Manual
Page | 17 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
4Performance and Technical Features
•Accurate Positioning: There are 6 overlapping detection zones with
bilateral transmit and receive technology. The detection zones can
accurately detect the objects with an intuitive display of the target
location.
•Micro Processor Technology: The Microprocessor Control Unit
generates the electromagnetic waves for scanning and the scanning
rate can be precisely controlled.
•Adjustable Sensitivity: ZK-D1065TDM detection zones have 100
sensitivity levels (1 to 100), You can preset the metal size, by
excluding the false alarm of coins, keys, jewelry, belt buckle, etc.
•Digital Pulse Technology: Digital signal processing and filtering
system in the detector has excellent anti-interference ability.
•Count Statistics: The detector displays the number of pedestrians
passed and Alarm count accurately.
•Harmless: The detector is harmless to heart pacemakers, pregnant
women, magnetic floppy disks, recording tapes, etc.
•Waterproof Foot Cover: The waterproof foot cover not only can fix
the device firmly but also protect the device against water.
•Safety: The Control Unit case and the panels are waterproof. The
cover is made of PVC synthetic material which makes the detector
waterproof, fireproof, and shockproof.
•Easy to install: The detector has an integrated design and it can be
effortlessly installed or disassembled in 15 minutes.
•Non-contact Measurement:3cm to 5cm distance measurement
•Temp. Warning:
Low Temp. Warning: Red Backlight + Beep to remind
High Temp. Warning: Red Backlight + Beep to remind

ZK-D1065TDM User Manual
Page | 18 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
5Control Panel
The components of the Control Panel are given below:
•LCD: Displays the Pass count, Alarm count, Password settings, and
other information.
•ESC: Press to discard the settings and exit the menu.
•

:Adjustment (decrement) key to decrease the parameter values.
•

:Adjustment (increment) key to increase the parameter values.
•OK: Opens the Menu interface, saves the settings, and exits the
menu.

ZK-D1065TDM User Manual
Page | 19 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Temperature LED Color Signal Sound
32.0°C to 37.3°C Green 1 Short Tone
37.4°C to 43°C Red Long tone + Red LED on for 15 sec