ZKTeco ZKP8005 User manual
3 Driver Installation
Due to the regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the
actual product and the written information in this manual.
ZKP8005
Version: 1.0
User Manual
Caution 1 Features
2 Packing List
Make sure to Install your printer on a stable surface, and prevent it
from any vibration and impact.
Do not use or store it in areas with high temperatures, humidity, or
pollution levels.
Connect the power adapter to a grounded outlet. Do not share
the same plug socket with a large-scale electrical motor or other
motors, which may cause voltage uctuations in the power
supply.
Avoid getting water or other conducive materials such as metal, to
get into the interface of the printer. If it occurs, unplug the AC
power cord immediately.
Do not print it without paper, or it will damage the rubber roller
and the thermal print head.
Unplug your printer before leaving it unused for an extended
period of time.
Never disassemble or modify the printer for repair or reconstruc-
tion.
Make sure that you use the original specied power source.
Quality roll paper is recommended for premium printing and
product maintenance.
Be sure to turn “OFF” the product of while plugging and unplug-
ging.
This product is only used up to 5000 metres above sea level in
tropical climate conditions.
Please make sure power is turned o while maintaining the
printer.
Don't touch or scratch printing head surface, roller and sensors.
Avoid gas, acetone or other organic solvents.
Wait till alcohol is completely volatilized, close the top cover and
connect the power again. Operate the print for self-test to make
sure it works properly.
Cable slot, specially designed for wall mounting.
Lightweight and clean in shape.
High-quality printing in low cost.
Hidden low noise and high-speed printing.
Easy for a paper rell, easy maintenance and excellent structure.
Low power consumption and low operating costs (no ribbons or
ink cartridges).
Compatible with ESC/POS print instruction set.
Suitable for all types of commercial retail POS systems, Restaurant
system, Industrial control systems.
Install driver under Windows OS (Steps as below):
Double click driver “POS Printer Driver Setup V7.17”.
Installation steps：
First make sure whether it is set as the default printer.
Select the printer port to use (ignore this step directly, if it is a USB
interface).
Click “Start” to install.
1.
2.
3.
2
1
ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone : +86 769 - 82109991
Fax : +86 755 - 89602394
www.zkteco.com
Copyright ©2022 ZKTECO CO., LTD. All Rights Reserved.
Printer
Power Adapter
Power Cable
USB Cable
User Manual
Paper Roll
Driver
1PC
1SET
1PC
1PC
1PC
1ROLL
1PC
6 Description of Button and Indicator Light
7 Button Function
8 How to Solve Paper Jam
FEED Button
Press to FEED paper manually.
Paper Indicator (LED Light)
The ashing blue and red lights indicate a paper shortage and the
absence of an alarm means everything is going well.
Power Indicator
The presence of light indicates that it is connected properly.
Error Button
The ALARM indicator twinkles when there is a paper shortage, a
cutter error, or a printing head overheating.
1.
2.
3.
4.
Self Test
When the printer is connected to power, turn it o, then press the
“FEED”button and turn it on at the same time. After 2 seconds, the
completed self-test will be printed out to indicate the printer
settings.
Method to Enter Hexadecimal Mode
When the printer is powered on, push the“FEED” button and turn
it on at the same time for around 10 seconds before releasing the
“FEED” button to enter data hex dump mode. On the paper, it will
appear “Hexadecimal Dump.”
Reset
When the printer is powered on, press the “FEED” button and turn
it on simultaneously for roughly 20 seconds; the reset is successful
if the beeper sounds.
1.
2.
3.
9 Cleaning
Timely clean the print head if below conditions occurred:
Unclear printing.
Unclear vertical column in printing paper.
Noisy feeding.
1.
2.
3.
Clean the printer as follow:
Turn o the printer and open the roll paper cover. Remove the roll
paper if any.
After printing, the thermal head can be very hot. Wait to let it cool
before cleaning.
Clean the thermal elements of the thermal head with wrung-out
cotton moistened with an alcohol solvent.
Close the cover after the ethanol has been completely volatilized.
After that, print the self-test page.
1.
2.
3.
4.
5 6
4
Method 1
Re-start printer.
Method 2
Open the battery cover near the paper exit. Turn the white gear on
the cutter. Only if the cutter gets back to its initial position, the
cover can be opened.
Caution: Do not damage the print head and the auto-cutter by
opening the cover forcibly.
4 Printer Connection
Connect the adopter cable to the printer power interface.
Connect the data cable to the printer port.
Connect the cash drawer to the printer.
1.
2.
3.
5 Paper Roll Loading
To install the roll paper, follow the steps below:
Open the paper roll cover.
Insert the paper roll as the following illustration shows.
Pull out a small roll of paper, and then close the paper roll cover.
Tear up the spare roll of paper.
1.
2.
3.
4.
10 Specications
Item
Paper Width
Print Width
Interface
Line Spacing
Character Size
Extension
Character
Sheet
Barcode Types
CPU Storage
Flash Storage
Power Adapter
Cash Drawer
Operation
Environment
Storage
Environment
Parameter
79.5±0.5mm
72mm
USB+LAN
3.75mm (Adjusted by command)
ANK, Font A: 1.5×3.0mm
Font B: 1.1×2.1mm
Chinese: 3.0×3.0mm
PC437(Std.Europe) / (Katakana) / PC850(Multilin-
gual) / PC860(Portugal) / PC863(Canadian) /
PC865(Nordic) / (West Europe) / (Greek) /
(Hebrew) / (East Europe) / (Iran) / (WPC1252) /
PC866(Cyrillic#2) / PC852(Latin2) / (PC858) /
(IranII) / (Latvian) / (Arabic) / (PT1511251)
UPC-A / UPC-E / JAN13(EAN13) / JAN8(EAN8) /
CODABAR / ITF / CODE39 / CODE93 / CODE128
64 Kbytes
256 Kbytes
Input: AC100V to 240V/50-60 Hz
Output: DC24V/2.5A
DC 24V/1A
Temperature (0 - 45℃) humidity (10 - 80%)
Temperature (-10 - 60℃) humidity (10 - 90%)
3
1 2
43
Other ZKTeco Printer manuals
