ZKTeco PV10M User manual

1
User Manual
PV10M/R Near-infrared Palm Device
Version: 1.0
Date: June 2020

Preface
Thank you for choosing our product PV10M/R Near-infrared Palm Device. Please read this User Manual carefully
before use.
We strongly believe that Palm Vein Device brings you and your customers an excellent user experience and will
uplift your Brand Image and the Management to a higher level.
Considering the stability of the product quality and service life, please do not intentionally dismantle the product
or modify the system settings without professional instructions. For further queries, please contact the local
dealers.

Content
1. Introduction ........................................................................................................................................................................................................1
2. Dimensions..........................................................................................................................................................................................................2
3. Technical Specications...............................................................................................................................................................................4
4. Technical Features...........................................................................................................................................................................................6
5. Installation Procedure....................................................................................................................................................................................7
6. Maintenance and Cleanliness Guidelines........................................................................................................................................ 19
7. FAQ ....................................................................................................................................................................................................................... 20

1
1. Introduction
PV10M/R is a touchless device which is used to capture the palm and vein features. It uses a near-infrared ll light,
a wide dynamic image sensor, and an aspherical distortion-free camera system. It can capture the palm and vein
images under the palm skin, thus oering an excellent anti-spoong performance.
It has a built-in high-performance, low-power-consumption processor with a frequency up to 400MHz, a USB
interface for power supply and communication, supporting the mainstream operating system.
By combining with the ZKPalm SDK, customers can easily develop a palm recognition system.

2
2. Dimensions
PV10R

3
Connector pinout
(7pin 1.25mm)
Pin 1 +5 V
Pin 2 GND
Pin 3 Shield GND
Pin 4 USB D-
Pin 5 USB D+
Pin 6 Reserved
Pin 7 Reserved
PV10M

4
3. Technical Specications
Sensor
Feature
Specications
Grayscale 256 levels
Image Size 480 * 640 pixels
Distortion Rate Less than 1%
H/W
Connector 7-pin 1.25mm USB 2.0
Power Consumption 0.5W (Standby) / 1.5W (Operating)
Interface USB 2.0 (High speed)
Power Requirements USB 5V
Temperature -10°C to 45°C / 14°F to 113°F
Humidity 0 to 90% RH
Lighting Environment Enrollment <800 Lux; Authentication <2000 Lux
Dimensions PV10M : 52.4 * 52.4 * 16.8mm (±1 mm)
PV10R : 41.5 * 34 mm (Radius*Height)
OS
Windows Windows XP / Windows 7 / Windows10 (32/64bits)
Android Android 4.1 or higher version

5
ZKPalm SDK
Recognition Angle Roll ± 60°, Pitch ± 30°
Recognition Method
1:1 and 1:N
Capacity 6,000 templates
Accuracy FRR=0.68% when FAR=0.001%
Recognition Time <300ms (Quad-core Cortex-A9 up to 1.6GHz)
Certications
CE, FCC, RoHS

6
4. TechnicalFeatures
Touchless technology with small size, and easy integration
Built-in distance detection sensor eectively reduces the standby power consumption
Wide dynamic image sensor to adapt ambient light in a wide range
Palm recognition range from 20cm to 35cm
Captures high-quality palm vein images even when the palm is dry & wet

7
5. Installation Procedure
PV10M/R Drive Installation
Note: You need to install the driver when you use the device for the rst time only. The users who have installed
the driver before do not need to install it again.
1. Save the installation package in your system. Unzip and open the driver installation package.

8

9
2. Connect the PV10M/R to your system.
3. Open the Device Manager of your system. First select Computer, right-click and then select Manage.
Since the relevant driver is not installed initially, the device is regarded as an unknown device as shown in
the below gure.

10
4. Now install the driver. At this time, return to the location where the driver installation folder is placed, and
open the Drive installation instructions.txt le in the folder, and follow the description in the second article

11
of the le. First select install drive.bat, then right-click and select "Run as administrator". After selecting,
interface 3 appears. Wait for 3 to 5 seconds, the current interface disappears automatically. Wait for 1
minute and return to the device management interface. Then unplug and insert the device USB port, you
can see that the computer can recognize the device-PV10M/R, as shown in 4 in the gure below. Finally,
the driver installation is successful.

12

13
Operation
1. Palm Placement
2. Indicator Status
a) Place the palm at 20 to 35cm above the device (The optimal
distance is 10 to 12cm).
b) Keep the whole palm parallel to the equipment. Ensure that the
palm is at the center of the sensor area.
c) Stretch the palm normally without any bends.
Follow the instructions and move your palm back and forth until
the registration or matching is successful.
Blue light: Detecting.
Green light: Registration is successful or matching is successful.
Red light: Registration is failed or matching is failed.
Status Indicator
Palm Vein Device

14
3. Incorrect Positions
Fingers together Fingers bent Not parallel to the device
NO
NO
NO

15
4. Demo Test
a) Double-click the ZKPalmDemo icon to open the demo test interface. Once the interface is opened,
click Connect.

16
b) Enter the User ID and click Enroll to register the palm vein.

17
c) After successful registration, the system automatically starts verifying the user’s palm vein.