ZKTeco ZK55 Series User manual

USER MANUAL
ZK55 Series
Version 1.0 Date: April, 2017

Important Claim
Firstly, thank you for purchasing this hybrid-bio terminal. Before using, please read this manual
carefully to avoid the unnecessary damage! The company reminds you that the proper use will
improve the use affect and authentication speed.
No written consent from our company, any unit, or individual isn’t allowed to excerpt, copy the
content of this manual in part or in full, also spread in any form.
The product described in the manual maybe includes the software which copyrights are shared by
the licensors including our company. Except for the permission of the relevant holder, any person
can’t copy, distribute, revise, modify, extract, decompile, disassemble, decrypt, reverse
engineering, leasing, transfer, sub-license the software, other acts of copyright infringement, but
the limitations applied to the law is excluded.

Copyrights
ⒸCopyright 2017 ZKTeco Co. Ltd.All rights reserved.
All rights reserved. Except as specifically permitted herein, no portion of the information in this
document may be reproduced in any form or by any means without the prior written permission
from ZKTeco.
Due to the constant renewal of products, the company cannot undertake the actual product in
consistence with the information in the document, also any dispute caused by the difference
between the actual technical parameters and the information in this document. Please forgive any
change without notice.

Safety Instructions
1. Read these instructions carefully. Keep these instructions for future reference.
2. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed
detergent for cleaning. Use moisture sheet or cloth for cleaning.
3. Please keep this equipment from humidity.
4. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
5. Make sure power cord such a way that people cannot step on it. Do not place anything over
the power cord.
6. All cautions and warnings on the equipment should be noted.
7. If the equipment is not used for long time, disconnect the equipment from main to avoid being
damaged by transient over voltage.
8. Never pour any liquid into opening; this could cause fire or electrical shock.
9. If one of the following situations arises, get the equipment checked by a service personnel:
10. The power cord or plug is damaged.
11. Liquid has penetrated into the equipment.
12. The equipment has been exposed to moisture.
13. The equipment does not work well or you cannot get it work according to user manual.
14. The equipment has dropped and damaged.
15. Do not leave this equipment in an environment unconditioned, storage temperature below
-20°C or above 60°C, it may damage the equipment.
16. Unplug the power cord when doing any service or adding optional kits.
Lithium Battery Caution:
1. Danger of explosion can happen if the battery is incorrectly replaced. Replace only the
original or equivalent type recommended by the manufacture. Dispose used batteries
according to the manufacturer’s instructions.
2. Do not remove the cover, and ensure no user serviceable components are inside. Take the
unit to the service center for service and repair.

Table of Contents
1. Packing List.......................................................................................................... 1
1.1. Standard Accessories........................................................................................................ 1
1.2 Optional Accessories.......................................................................................................... 1
2. System View......................................................................................................... 3
2.1. Rear View .......................................................................................................................... 3
2.2. Back View.......................................................................................................................... 3
2.3. Specification ...................................................................................................................... 4
2.4. Internal Layout................................................................................................................... 5
3. Pin Definition........................................................................................................ 6
3.1. LVDS connector Pin Definition .......................................................................................... 6
3.2. DC Jack Pin Definition....................................................................................................... 6
3.3. COM connector Pin Definition........................................................................................... 7
3.4. SATA: 22-pin SATA Pin Definition...................................................................................... 7
3.5. Mini-PCIE Pin Definition.................................................................................................... 8
3.6. Int. Speaker Pin Definition................................................................................................. 8
3.7. Power On/Off connector Pin Definition.............................................................................. 9
3.8. 1D/2D scanner connector Pin Definition ........................................................................... 9
3.9. Projected capacitive touch connector Pin Definition......................................................... 9
3.10. Resistive touch connector Pin Definition......................................................................... 9
3.11. COM3 connector Pin Definition..................................................................................... 10
3.12. Sideward MSR connector Pin Definition....................................................................... 10
3.13. RJ11 (Cash Drawer) connector Pin Definition............................................................... 10
3.14. VFD connector Pin Definition.........................................................................................11
4. Rear I/O Interface................................................................................................11
4.1. 2-Layer USB2.0 connector Pin Definition.........................................................................11
4.2. 2-Layer USB3.0+2.0 connector Pin Definition .................................................................11
4.3. LAN: RJ45 Pin Definition................................................................................................. 12
4.4. LINE-OUT JACK Pin Definition ....................................................................................... 12
5. System Assembly & Disassembly ...................................................................... 13
5.1. HDD................................................................................................................................. 13
5.2. Memory............................................................................................................................ 14
5.3. MSR / i-Button / RFID...................................................................................................... 14
5.4. VFD / 8”or 10” 2nd Display.............................................................................................. 15
5.5. Thermal printer ................................................................................................................ 15
5.6. 1D/2D Barcode scanner.................................................................................................. 16
5.6.1. 1D/2D Attached Type Barcode scanner................................................................ 16

5.6.2. 1D/2D Handheld Type Barcode scanner.............................................................. 17
5.7. Cash Drawer.................................................................................................................... 17
6. Device Driver Installation.................................................................................... 18
6.1. Resistive Type Touch Panel and P-CAP......................................................................... 18
6.2. MagSwipe Card Reader Configuration Utility.................................................................. 22
6.3. RFID................................................................................................................................. 27
6.4. Configuration Utility of i-Button Reader Installation ........................................................ 32
6.5. VFD.................................................................................................................................. 35
7. BIOS/Utility setup............................................................................................... 40
7.1. Advanced......................................................................................................................... 41
7.1.1. Boot Configuration................................................................................................ 42
7.1.2. Audio Configuration............................................................................................... 42
7.1.3. Video Configuration .............................................................................................. 43
7.1.4. SATA Configuration............................................................................................... 43
7.2. Security............................................................................................................................ 44
7.3. Power............................................................................................................................... 44
7.4. Boot.................................................................................................................................. 45
7.5. Exit................................................................................................................................... 45
8. LCD Surface Cleaning........................................................................................ 47

ZK55 Series User Manual
1
1. Packing List
1.1. Standard Accessories
a.
b.
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
c.
d.
1.2 Optional Accessories
a.
b.
c.

ZK55 Series User Manual
2
d.
e
f.
g.
a. Single MSR
b. VFD
c. 8” or 10.4” 2nd Display
d. 1D or 2D Attached Type Barcode Scanner
e. 1D or 2D Handheld Type Barcode Scanner
f. Thermal Printer
g. Cash Drawer

ZK55 Series User Manual
3
2. System View
2.1. Rear View
2.2. Back View
☆Please make sure 19V DC plug in the right direction before plugging in DC jack.
VFD Cover/8” 2nd /10” 2nd (optional)
MSR/i-Button/RFID
(optional)
HDD Cover