Aaeon AOP-9120 User manual

Operator Panel AOP-9120
AOP-9120
Intel®Atom N270 Processor
12.1” XGA 200nits color TFT LCD
10/100/1000Base-TX Ethernet
4 COM/ 4 USB2.0
1 VGA/ 1 DVI
Mic-in, Line-out
AOP-9120 Manual 1st Ed
January 2010

Operator Panel AOP-9120
i
Copyright Notice
This document is copyrighted, 2010. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, nor for
any infringements upon the rights of third parties, which may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON, assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Operator Panel AOP-9120
ii
Acknowledgments
 Award is a trademark of Award Software International, Inc.
 VIA is a trademark of VIA Technologies, Inc.
 IBM, PC/AT, PS/2 and VGA are trademarks of International
Business Machines Corporation.
 Intel®and AtomTM are trademarks of Intel Corporation.
 Microsoft Windows®is a registered trademark of Microsoft
Corporation.
 RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
 ESS is a trademark of ESS Technology, Inc.
 UMC is a trademark of United Microelectronics Corporation.
 SMI is a trademark of Silicon Motion, Inc.
 Creative is a trademark of Creative Technology LTD.
All other product names or trademarks are properties of their
respective owners.

Operator Panel AOP-9120
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 AOP-9120 Operator Panel PC
• 10 Mount brackets and screws
• 1 Power cord (Optional)
• 1 Transfer Board for CD-ROM
• 1 CD-ROM for manual (in PDF format) and drivers
If any of these items are missing or damaged, you should contact your
distributor or sales representative immediately.
1. Use a 3 V @ 200 mA lithium battery
2. Packing: please carry the unit with both hands,
handle with care
3. Maintenance: to properly maintain and clean the
surfaces, use only approved products or clean
with a dry applicator
4. Do not remove CompactFlash storage card
while reading from or writing into the storage
card.

Operator Panel AOP-9120
iv
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from anyAC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
4. For plug-in equipment, the power outlet must be installed near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation.
Dropping it or letting it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over voltage.
12. Never pour any liquid into an opening. This may cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, the equipment
should be opened only by qualified service personnel.

Operator Panel AOP-9120
v
14. If one of the following situations arises, get the equipment
checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to
work according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY
DAMAGE THE EQUIPMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED.REPLACE ONLY WITH THE
SAME OR EQUIVALENT TYPE RECOMMENDED BY THE
MANUFACTURER, DISCARD USED BATTERIES ACCORDING
TO THE MANUFACTURER'S INSTRUCTIONS.
DISCLAIMER: This set of instructions is given according to IEC
704-1. AAEON disclaims all responsibility for the accuracy of any
statements contained herein.

Operator Panel AOP-9120
vi
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Panel PC/ Workstation
有毒有害物质或元素
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件 ×○○○○○
外部信号
连接器及线材 ×○○○○○
外壳 ×○○○○○
中央处理器
与内存 ×○○○○○
硬盘 ×○○○○○
液晶模块 ×○○○○○
光驱 ×○○○○○
触控模块 ×○○○○○
电源 ×○○○○○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。

Operator Panel AOP-9120
vii
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Feature......................................................................1-3
1.3 Specification..............................................................1-4
1.4 Dimension .................................................................1-7
Chapter 2 Hardware Installation
2.1 2.5” Hard Disk Drive (HDD) Installation ....................2-2
2.2 Panel Mounting .........................................................2-5
2.3 RS-232 PORT: COM1/COM3/COM4/COM5;
RS-232/422/485 PORT: COM2 (MALE) .........................2-7
2.4 VGA PORT (FEMALE)..............................................2-7
2.5 LAN0 & LAN1 PORT (FEMALE)...............................2-7
2.6 USB2.0 PORT-USB0/1/2 (FEMALE) ........................2-8
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization . ................................. 3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A FAQ
A.1 FAQ........................................................................A-2

Operator Panel AOP-9120
Chapter 1 General Information 1-1
General
Chapter
1
Information

Operator Panel AOP-9120
Chapter 1 General Information 1-2
1.1 Introduction
AOP-9120 operator panel PC is a high performance solution
features all-in-one SBC with Intel®AtomTM N270 1.6 GHz processor.
That is designed to serve as a human machine interface (HMI) and
as a multimedia computer. It is a PC-based system with true-color
and wide-view-angle TFT LCD display. Moreover, it equips one
Mini-PCI slot for expansion. Onboard Ethernet controller,
multi-COM port interfaces, and DVI. In addition, its "fit anywhere"
design makes it very flexible and able to be used in many different
kinds of installations. It can be wall mounted, panel mounted or
stood upright on a desktop.
For system integrators, this simple, complete, compact and highly
integrated multimedia system let you easily build a panel PC into
your applications. Common industrial applications include factory
automation systems, precision machinery, and production process
control. It is also suitable for many non-industrial applications,
including interactive kiosk systems, entertainment management,
and car park automation. Our panel PC is a reliable, cost-effective
solution to your application's processing requirements.