Zone SAFE OES-BAS-i5 User manual

Operating Manual of
OES-BAS-i5 & OES-BAS-i10 Safe

INSTRUCTION MANUAL FOR OES-BAS-i5 & OES-BAS-i10 SAFE
Dear Customer,
We feel immense pleasure while introducing Ozone Digital Safes for Home &
Office use, designed using state of the art Digital Technology
The distinguishing features of Ozone Digital Safes are:
• Highly reliable computerized keys as per American Standards-Non-
duplicable & wear resistant
• Single molded case with high quality powder coating
• Battery status Indicator
• Designed in aesthetically pleasing color advantage of it.
Feel free to write us at [e-mail] or visit our
website www.ozonesecutech.com for more information.
We value your suggestions and feedbacks.
Ozone is committed to constant product improvements and feels the best
way to accomplish this task is by listening to the experts on our gear & our
valued customers. This commitment gets strengthened every time you buy
an Ozone product.
We appreciate the support you have shown through the purchase of our
product. Please pay close attention to the manual to become familiar with its
features & applications.
Regards,
Ozone Secutech Pvt. Ltd.

OPERATING INSTRUCTIONS FOR OES-BAS-i10 Safe
GETTING STARTED
MOUNTING METHOD:
• Fix the Safe in the place which is not easy to move like cupboard or almirah.
• Drill holes for inserting expansion bolts (or clamping screws) in the right
place.
• Turn the expansion bolts counter clockwise to separate.
• Use the expansion bolts (or clamping screws) to secure the case to the wall.
• Make sure the case is mounted in place as required and then tighten all
screws
• Don’t keep emergency keys inside the Safe
CAUTION: Expansion bolts to be used in case of concrete wall surface &
clamping screw to be used for wooden wall surface.
ACCESSORIES INCLUDING :
1. Two Keys
2. Four Mounting Heavy-duty Bolts
3. Four Carbon zinc Batteries
4. Floor Carpet
5. Warranty Card
Green and
Red LED to
show that the
Safe’s open
or locked
Manual hand knob for
easy and fast access
Soft keypad for locking
and accessing the Safe
Code
200x300x200
External Size
(HxWxD)mm
OES-BAS-i5
Weight
(Kg.)
Volume
(Ltr.)
200x300x200
OES-BAS-i10
5.9
5.9
7.8
7.8

OPENING YOUR SAFE FOR THE FIRST TIME
On receipt of Safe, open the Safe with the mechanical override key
(emergency key)
• Remove the Key Hole Cover given on Operating panel
• Insert Mechanical Override Key (Emergency Key) & Turn it counter clock-wise
• Then Turn the knob clockwise to open the Safe door
CAUTION: One the Safe opens. remember to pull out the mechanical override
key (emergency key) and keep it in a secure place outside the Safe.
INSERTING THE BATTERIES
• Open the door
• Insert 4 x AA batteries into the battery compartment given on the backside of
the Safe door.
• Under normal condition, if both of the red & green light are turned on at the
same time, it means the voltage is low and you should insert new batteries
CAUTION: Replace 4 fresh batteries by lining them up in a manner as indicated
by “ + “ and “ - “ signs.
SETTING THE USER CODE
• With the Safe door open, press the reset button given inside of the Safe door.
• Enter your new user code (3-8 digits) and press “ ” or “ ” button to confirm.
Sound of a buzzer beep will indicate the acceptance and storage of the new
User Code.
• If the yellow beeps flashes along with 3 buzzer beeps, then it indicates that
code registration has been ineffective and you need to try again.
OPENING THE SAFE
• Enter your new User Code (3-8 digits). immediately one buzzer beep will occur
along with yellow light flash.
• Press “ ” or “ ” button and green light will turn on.
• Rotate the knob clockwise and the Safe door will open.
3

CAUTION: the user preset code is “159". Please enter the user code again if the
yellow light flashes along with three buzzer beeps.
LOCKING THE SAFE
• Turn the knob counter clockwise to close the door.
AUTO SECURE MODE
• 3 Minutes auto freeze mode on 3 Consecutive wrong Password attempts.
During this period, the Safe can’t be operated.
CAUTION: The key pad would be disabled during the beeping. You can only stop
the beeps by opening the Safe with mechanical override key (emergency key)
and power-cut by removing the battery.
4

5

6

7

8

9