Zonet ZEN3301E - QUICK INSTALLATION GUIDE REV 01 User manual

Gigabit Ethernet PCI Adapter
Quick Installation Guide
P
Pa ac ck ka ag ge e
• 1 Gigabit Ethernet PCI Adapter
• 1 Quick Installation Guide
• 1 CD with Driver
H
Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
To insert the PCI adapter into our PC, follow the steps bellow:
1. Turn off the computer and remove its cover.
2. Insert the adapter into a PCI slot.
3. Lock this adapter to the rear of the computer and put back the computer cover.
4. Connect the adapter to network using twisted-pair cable.
S
So of ft tw wa ar re e I In ns st ta al ll la at ti io on n f fo or r W Wi in nd do ow ws s 2 20 00 00 0/ / P P/ /V Vi is st ta a
1. After turn-ON the computer, the hardware will be detected automaticall . The operating
s stem will install all necessar driver files for the hardware. After approximatel 1 minute, a
message will appear at the lower right-hand corner “Your new hardware is now installed and
can be used.” The hardware and software installation is completed.
2. If our computer does not detect and/or install the driver files automaticall , please insert the
Installation CD into our CD-ROM drive and double-click the setup program, SETUP.exe. This
will install all necessar files from the Installation CD for ou.
12-086-00708 Rev:01