Zoom F1 Mounting instructions


F1 Firmware Update Guide
Copyright(C) 2018 ZOOM Corporation. All Rights Reserved.
The illustrations in these instructions might differ from actual screens.
●Zoom Corporation does not bear liability for any damages or third-party
claims arising from the use of the software, whether directly or indirectly.
Unauthorized redistribution, sale, leasing, renting, alteration, or reverse
engineering of the software is prohibited. Features and specifications of the
software and the contents of the documentation may be changed in future
without notice.

Updating the rmware
1. Install new batteries in the or connect the dedicated AC adapter.
NOTE
Executing a rmware update is not possible if the remaining battery power is low.
2. Copy the rmware update le to the root directory on a microSD card.
3. Insert the microSD card into the .
4. While pressing , turn the power on.
5. Use and to select "Update", and press .
NOTE
During the rmware update, do not turn the power o or remove the microSD card. Doing so could cause the
to become unstartable.
6. After the rmware update completes, turn the power o.
Z2I-3224-01