ZOSI C1PRO User manual

Quick Start Guide
^ŵĂƌƚtŝ&ŝĂƩĞƌLJ^ĞĐƵƌŝƚLJĂŵĞƌĂ
This guide will get you going with your camera. For more details and information
of the camera, please visit our official website：www.zositech.com
V6.W.02.Z

What`s in the Box
01
Battery Camera USB Cable Mounting
Screw Bag
Adhesive Pad Magnetic Base Bracket
Quick Start Guide Reset Needle Warning Sticker
NOTE: Accessories vary with the camera models you purchase.
1 English

02 Gallery & Specs
Power SwitchHold 3-5 seconds Turn ON/OFF
Reset Button
Slow Flashing Red Light
Fast Flashing Red Light
Solid Red Light
Solid Blue Light
Solid Blue Light
Status Indicator
Charge Indicator
Hold 3-5 seconds Device Reset
Waiting for connection
Device connecting
Connection succeeded
Camera’s charging
Camera’s fully charged
Wall Mount
Magnetic Mount
Power Switch
Charge Indicator
Micro SD Card Slot
Reset Hole
DC 5V Power Port
HD Lens
IR LEDs
Status Indicator
Microphone
Spotlights
PIR Sensor
Speaker
English 2English 2

Account Registration
Add Device via QR Code
The following steps take Android system as an example. The interface of iOS
system will be slightly different.
• Use your mobile browser to scan the QR code above to download Zosi
Smart (both iphone and Android phone can scan and download. iOS users
can use your mobile camera to scan QR code or directly search for "Zosi
Smart" in App Store to download.
• Tap Register to register your Zosi account.
1. Press and hold the camera switch, and you will hear "Device is waiting to
connect", and the network status indicator light start flashing red slowly.
2. Tap the Scan QR Code button and scan the QR Code on the camera.
3. Enter the device name on the device information page, and tap the Add
an Unconnected Device button.
4. On the Connect to WiFi page, select WiFi and enter the corresponding
WiFi password, and tap Next.
NOTE: Support 2.4GHz WiFi only, please do not select 5GHz WiFi.
5. Point the QR code generated on your phone towards the camera lens to
scan.
6. When you hear "Wireless Configuration Succeed" from the camera, tap
Next and Confirm. Tap the Done button on the Wireless Connection
Succeed page, and the device has been successfully added to the App.
03
04
ZosiSmart iOS/Android
3 English

05
NOTE: If it fails to add device, please check the following:
1. Hear "Wireless connection failed"? Please check if the WiFi password is
entered correctly.
2. Please check if the device is plugged in.
3. Make sure that the network connected to the mobile phone and the
device can access the Internet normally.
4. Confirm if there are firewall restrictions on your home network. It may be
due to network reasons that the equipment cannot be connected to our
server normally in result the device is not online.
5. If you cannot identify the cause, please reset the device and reconfigure
the device network. Insert the reset pin into the reset hole on the back for 5
seconds, and then add the device again according to the above steps
(Note: camera should be reset in operating state).
Camera Installation
5.1 You can place it on any flat surface: table, chair, TV cabinet, etc.
5.2 Install with Wall Mount Bracket:
(1) Unscrew the base plate, drill 3 holes in the wall according to the hole of
the base, and insert plastic wall plugs. Screw the base plate.
(2) Tighten the bracket.
(3) Install the camera on the bracket and adjust the camera angle.
English 4

Unsrew the baseplate
Fix the base with screws
Tighten the bracket Adjust the camera angle
5.3 Install with Magnetic Bracket
a: Tear the protective film on one side of the double-sided tape and paste it
in the position where you want to install. please noted that you have to press
the double-sided tape for more than 3 minutes to squeeze the air between
the double-sided tape and the wall.
b: Please Tear the protective film on the other side, and fix the bracket on the
surface of the double-sided tape, press the bracket and keep it for more than
after waitting for 10 minutes .
c: Attach the camera to the magnetic bracket and adjust the camera angle.
NOTE: Please keep the surface clean, smooth and dry. It is unsuitable for
uneven wood and plaster walls.
• Please wipe the wall surface and the bottom of the magnetic bracket
before installation.
5 English

06
Tear off the protective film on one side of the double-sided adhesive pad,
stick it on the location.
Remove the protective film on the other side, and stick the bracket on the
adhesive pad.
English 6

07 Installation Environment
Height: Install the camera 6-9 ft (2-3m) above the ground.
Distance: Best accuracy for objects within 5-50 ft (1.5-15 m).
Angle: Tilt the camera down about 30°-60°from the horizontal position. It is
suggested to adjust the angle between camera and detected object larger
than 10°.
NOTE: Wake-up of the camera will be affected by various factors, such as
the distance between the person and the camera, the height of the person,
the height and angle of the camera, etc.
Distancia: 5-50 pies (1,5-15 m)
)m3-2(s
eip9-6:arutlA
7 English

08 Installation Precautions
• Do not face the camera to any light source.
• Do not point the camera at glass windows or reflective objects.
Otherwise, it may result in poor image performance due to reflections from
infrared LEDs, ambient lights or status lights.
• Do not mount the camera in shaded area, and point the camera towards
a well-lit area. For better image quality, make sure the camera and the
captured subject are at the same lighting conditions.
• For optimum performance, it is recommended that the camera be
installed as far away as possible from electronic devices such as
microwaves, televisions, radio phones and baby monitors to prevent signal
interference.
• It is recommended to clean the lens with a soft cloth from time to time.
• Do not expose the power port to water or moisture, or blocked by dirt or
other things.
• Do not install the camera where rain and snow may hit the lens directly.
• Camera may work in extremely cold conditions as low as -10°C as it will
produce heat when powered on. You may power the camera indoors for a
few minutes before installing it outdoors. (Only for outdoor cameras)
English 8

09 Notification of Compliance
1. FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including interference
that may cause undesired operation.
2. CE Simplified EU Declaration of Conformity
ZOSI declares that product is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
3. Correct Dispose of this product
This marking indicates that this product should not be disposed with other
household waste throughout the EU. To prevent harm to the environment or
human health from uncontrolled waste disposal and promote the sustainable
reuse of material resources, please recycle it responsibly. To return your used
device, please use the return and collection system or contact the retailer
from whom the product was purchased. They can take this product for
environmentally safe recycling.
9 English

Copyright © 2022 ZOSI Technology Co., Ltd.
No part of this publication may be reproduced in any way without the written
permission of ZOSI. The information in this publication is believed to be
accurate in all respects. ZOSI assumes no responsibility for any consequenc-
es resulting from their use. As our products require continuous improvement,
ZOSI reserves the right to modify product designs, specifications and prices
without notice and without any obligation. All rights reserved,and ZOSI
reserves the final interpretation right of this manual.
www.zositech.com
[e-mail]
F920000Z3007300