ZOSI C190 User manual

Quick Start Guide
ZOSI
This Quick Start Guide will help you with installation to get you
going. For more instructions and details, please contact us.
iOS/Android

1. Structure
Antenna
HD Lens
Warm
White LEDs
Infrared
LEDs
Reset Button
RJ45 PortPower Supply

2. Register an Account
The following is instructions for the Android version, the interface
of the ios version will be slightly different.
▪Scan the QR code on the device and download the free ZOSI
Smart App on smartphone.
▪Click “Register” to register an account.
▪Enter your email address and click "Obtain Verification Code"
to receive the verification code. Enter verification code and
password, and then click “Register” to complete the registration.
Note: If you did not receive the verification code, please check if
the verification code is considered spam or try to send another
email.

3. Add a Device
(1) Power on the camera, wait about 20 seconds start-up time,
it gives out a "device is waiting for connection" tone. After
smartphone is connected to WiFi, log in ZOSI Smart App and go
to the "My Device" page, click the "+" in the upper right corner
to add a device.
(2) Choose Camera C190.

(3) Click the "Scan QR Code" and scan the QR code on device or
click "Manually enter the device UID", enter device UID and click
"OK".

(4) On the device information page, enter the device name and
click "Add an unconnected router device".

(5) Configure WiFi setting for the device on the "Connect to WiFi"
page. Click "Next" and then click the "Hear the tone" button on
the "Power On" page.

(6) Click the "Scan QR Code" button and align the QR code
generated on the smartphone with the camera lens for scanning.

(7) Camera make a click sound, and you will hear "Wireless
configuration successful" "WiFi is connecting, please wait" and
after hearing "Wireless connection succeeds" tone, click "Next"
and click "OK" button in the pop-up box. Click "Done" on the
"Device Added successfully" page.

(8) Operate on the device page.
Note: If the device is not added successfully, please reset the
device by pressing the device reset button for 5 seconds, and
then add the device again according to the above steps.

4. AP Hotspot
(To trigger the hotspot of device, the device shall be unconnected
with network or after the device is reset)
Power on the camera, you hear a tone "The device is waiting
for connection". On the device page, click "+" in the upper right
corner, and select "Add device via AP"

For Android devices:
On the "Set up Device" page, search for device hotspot nearby
and it will connect automatically, and then jump to the "WiFi
device live preview" page.

For ios devices:
Follow the instructions on "WiFi Guide" page.

Pairing camera AP (default password is ipc12345678)

Click "Add" in the pop-up box on the "Connect devices" page,
and then jump to the "WiFi device live preview" page.

A: If you need to configure WiFi for the device, select WiFi and
enter WiFi password to connect. Select WiFi nearby, the device
does not support 5GHz WIFI for now, WIFI with Chinese or
special characters is also not supported. Device is connecting on
the "To Add Device" page. "Device added successfully" page pops
up, click "Done" to complete adding device. And then jumps to
the "My Device" page, users can operate the device.

B: Operate in AP mode only.
Click the return sign in the upper left corner, click “OK” on the
pop-up box. Click "AP Tools" on "My" page, select and operate
the device. Functions are relatively reduced and you can operate
on the setting page.

5. Camera Alarm System
SD Card ( remove this plastic cover with a
screwdriver)
Speaker
Microphone