ZOSI ZR08JP User manual

Wireless Security Camera System
Quick Start Guide
For more informaon of your new system, please refer to www.zositech.com
V2.P.08.Z

EN
ES
01
12
Contents

1
1Gallery & Specs
1.1 Grabador NVR
1.2 Cámara
Puerto HDMI
Puerto VGA
Puerto de red
AntenaAntena
Puerto del
ratón USB
Puerto de
respaldo USB
Puerto de alimentación
Antena
Lente
LED IR
CDS

2
2System Connecon
2.1 Connect NVR to the Internet
(1) Connect NVR to router using a network cable.
(2) Connect monitor to NVR via HDMI or VGA port.
(3) Connect the included USB mouse to the top USB port of NVR.
(4) Connect NVR to 12V power supply.
(5) Aer the system starts, pair and connect IPC and camera to the system (maximum support 8
channels).
(6) The monitor will show the real-me monitoring picture of the camera.

3
A: Camera Installaon Diagram
B: How to test the network status of NVR?
(1) Right click Mouse > Go to Main Menu > Seng > Network
(2) Tick 'Obtain IP address automacally'
Click 'Test', if 'OK' is displayed, ck ‘DHCP’ and apply, the device will automacally assign the
corresponding network segment and IP address. Aer clicking Test, if the page is displayed
successfully, it is successfully connected to network.
NOTE: Please make sure that the DHCP of the connected router is enabled at the same me.
Drill 3 holes on the wall
according to the mounng
hole template, install the
wall plug.
Align hole site of the camera
to wall plug, twist and lock the
screws.
Aer adjustment, twist and
lock the adjusng screw.
Adjusng Screw

4
C: WiFi Setup
Right-click the main interface - Main Menu - Setup - Network - Wireless Network, default seng and
apply.
2.2 Download ZOSI Smart App
Zosi Smart App (IOS/Android) App video operaon link

5
3AVSS PC Client
3.1 Install AVSS on PC
Get the AVSS soware from www.
zositech.com or from your agent.
Double-click the icon AVSS to open,
select the language and click Login.
Note: You can log in with the default
username and password, or register a
new account.
The user name is the account an
password registered on the App in 2.3.
3.2 Device Management
Click the Add Device buon in the device list to add/edit/configure/search for the device.

6
3.3 Live View 3.4 Video Playback
Select channel to watch live streaming. Select ‘Playback’, select device, channel, date,
me, click the play buon to start replaying
recorded video.
4Add Device
4.1 Add IPC to wireless camera system
(1) Connect IPC and NVR in the same wireless network.
(2) Right-click the mouse on the live channel page and get the main menu.
(3) Click IPC Channel Config to enter the configuraon page.
(4) Click the search buon to search for IP cameras.

7
(5) Tick the IPC channel, click WiFi add.
(6) The IPC device is successfully added and it can be displayed in live view channel and operated.

8
5Hard Drive/ Micro SD Card
Some camera kits may not contain hard drives, depending on the camera kit you
purchase. This kit support most 3.5” HDD.
NOTE: Please skip this step if your recorder has a pre-installed hard drive.
① Power off the NVR, unscrew and remove the top cover of recorder.
② Connect the power cable and data cable of the hard drive to the corresponding
ports in the recorder.
③ Put the hard disk into the recorder. All wires should cross up over the hard drive.
④ Hold the hard disk and the NVR, gently turn it over and line up the holes on the
hard disk with the holes on the NVR. Use a Phillips screwdriver, screw the included
screws into the holes.Assemble the cover.
You need to format the hard drive before recording. Right click mouse> Main
Menu> Hard Disk Management> select Hard Disk> Format> Apply.
1. Remove the top cover
3. Fix Hard drive 4. Assemble the cover
2. Hard disk wiring

9
6Video Record
Right click the mouse > Go to Main Menu > Setup > Record
You shall see the record sengs for all channels. Modify the record seng based on your needs and
apply the changes.
6.1 Moon Detecon
Set moon Detecon, NVR will
only record when moon or
movement is detected. Right click
the mouse > Main Menu > Setup
> Alarm > Moon detecon.
The system starts recording when
moon is detected by the camera,
and the captured picture will
show at the boom le corner.
Select camera: ck the channel
you want to record on moon
detecon.
6.2 Video Playback
Go to Main Menu > Search, system presents as following:
Search the video you want by me or event to play.

10
Previous Record: move to last recorded event
Next Record: move to next recorded event
Fast Forward: video can be played at different speed, from 1/4 mes to 16 mes.
Rewind: Video play can be rewinded at 1 me, 8 mes, 16 mes and 32 mes.
Screen Display Mode: both single-screen and mul-screen are available.
You can choose howmany channels you want to playback at the same me. Channel without records
presents blank screen.
6.5 Video Backup
Insert USB flash drive> right-click the mouse> enter the Main Menu> Hard Disk Management> USB
flash drive detected> return> Backup> select Channel and Time period> Search> select the video file
you want to back up> click Backup> backup complete.

11
7Live Video Display
You can see picture display on the monitor normally, as the 4-channel picture shown in the figure.
8FAQs
Q:Why can't I search for devices when adding cameras?
A:Make sure that the device and the mobile device are on the same LAN, otherwise please enter the device
ID manually.
Q: Why can't my device connect to the network?
A: Please check:
· Is the device connected to the Internet?
· Is the router working properly?
· Is the router's DHCP server open?
Q: Why can't I find the video files?
A: Please check:
· Is the hard drive broken?
· Is the search period valid?
· Whether the system me is correct.
Q: Why the monitor screen cannot display for some channels?
A: Please check whether the camera has been added to NVR.
Q: Why can't I watch the recording by entering the device password?
A: Please confirm whether the correct device password is entered. It is recommended to keep the password.