Zte WP623R User manual

Know Your Phone Installation
Copyright © 2010 by ZTE Corporation
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form
orby any means, electronic or mechanical, including photocopying and microfilm, without the
prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on
print errors or update specifications without prior notice.
ZTE WP623R
GSM Wireless Phone
User Guide
1. Handset
Connect phone and handset by using the phone cord.
2. Antenna
You need to install the antenna before using your phone. Install the
antenna to antenna connector ANT. Hold the plastic stick of the antenna
and rotate the metal screw cap in clockwise direction to fix it. Do not
rotate antenna directly.
3. External power adapter
Plug the external power adapter to the external AC socket.
4. SIM card
Always switch the phone off before removing or inserting SIM card.
Open the bottom cover of the SIM card. Lift the SIM card holder up, slide
the SIM card into the SIM slot. Make sure that the contact area of the
card is facing down. And the beveled corner matches with the SIM slot.
Close the SIM card holder back to fix the SIM card and install the bottom
cover.
5. Connect to computer
Connect computer and phone’s DATA interface with the compatible data
cable.
How to Make a Call
Key Instruction
Key Description
How to Power on/off
To power on your phone, connect phone and external power outlet with
the power adapter, and then press and hold the Exit key for about three
seconds. If external power not available, switch the power toggle switch
BATT to “ON” side, and then press and hold the Exit key for about three
seconds.
To power off phone, press and hold Exit key till the phone is powered off.
1. Pick up the handset or press the HANDS-FREE key, or go to step 2
directly.
2. Enter the phone number (add country code and area code when
making an international call), wait for several seconds to send the
call automatically or press CALL/REDIAL key to make the call.
Select recipient’s number from Contacts, or press CALL/REDIAL
key to select a number from the recent calls list, then press CALL/
REDIAL key to make the call.
Message
Phone Code
Phone code could prevent your phone from unauthorized use. The de-
fault phone code is 1234. Change it to your own as soon as possible.
If you change the default phone code to a new one, remember it or place
it at secure place.
Interface Icons
Icon Description Icon Description
Signal strength New message (blinks when memory is full)
Silent Divert always
Power indicator Alarm cl ock
Bar blacklist Bar all
Friend only New voice mail
Roaming
No.55, Hi-tech Road South, ShenZhen, P.R.China
Postcode:518057 Service Hotline: [phone]
E-mail: [email protected]. cn URL:http://www.zte.com.cn
Manual No. : 079584502146
1
1. MENU/SELECT It is used to enter main Menu, select or confirm
options in Menu, or confirm the character chosen in
condition of character input.
2. Number Use the number keys to enter numbers and
characters.
3. #, * It differs in different mode, option or function menu.
4. Scrolling Press these keys to scroll cursor to the left, right,
up or down when inputting characters or selecting
items. Or default functions in standby mode are
set in Settings menu.
It is used to erase input information, or cancel
operating, exit to previous interface, or enter con-
tacts list in standby mode.
6. EXT PWR Lights on when the phone is connected to external
power supply.
7. MESSAGE This is the shortcut key to enter message menu in
standby mode.
8. EXIT It is used to power on/power off the phone.
End an active call or reject a call.
9. CALL/REDIAL Press this key to make a call after having entered
the telephone number intended for calling. Or press
to enter all recent call list in standby mode.
10. HANDS-FREE If you are using the handset to call and want to
transfer the call to the speakerphone, press this
key and hang up the handset to put conversation
on the speakerphone.
It is strongly recommended to connect the phone to external power
outlet, and use internal battery to power your phone only when external
power fails or is not available. To charge the internal battery, please
switch the BATT to “ON” side. If the BATTtoggle switch is on “ OFF” side,
battery charge operation can not be fulfilled.
Voice Mail
Before using Voicemail, please contact service provider to confirm that
the voicemail has been activated.
The system automatically sends a message to your phone informing a
new voice message. Read the message and then dial voice mail number
to listen to your voice message.
To read or send your voice mail quickly, you set the Voicemail No. first.
Pick up the handset or press HANDS-FREE key, and then hold “1” key
to dial voice mail number. In standby mode you can also hold “1” key
directly to read your voice mail.
Select Short Messages in Menu.
Select New message to write short message, select Options to
send or save the short message.
Select Inbox to view messages received.
Select Outbox to view the sent messages.
Select Draftbox to view draft messages.
Select Msg settings to make some necessary short message
settings.
Select Voicemail to Get voicemail, or set the Voicemail No..
PIN Code and PUK Code
PIN Code: PIN code could prevent your SIM card from unauthorized
use. When the PIN lock is on, you should enter the PIN code when
powering on the phone again. Change the default PIN code to your
own PIN code as soon as possible.
PUK Code: Three consecutive incorrect PIN code entries may lock
your SIM card. To unlock, you need PUK code.
PIN code and PUK code may be offered together with the SIM card,
contact your network operator if codes not there.
2345678
4
5
6
7
8
9
10
1
2
3
5. NAMES/CLR/
BACK
How to access GPRS
If your phone supports GPRS service, connect the data cable to com-
puter and phone’s DATA interface (do not insert or remove data cable
when power is on). Then you can access GPRS by “ZTE Dial-Up (GSM)
software” on the CD which may be offered with the phone. If you use
the USB port, first install the USB driver from the CD.
How to Receive FM Radio
Your phone set support FM radio function. The features of the FM
function described as follow:
1. Frequency range: 76MHz~108MHz.
2. Eight levels (from 0~7) are there to adjust the volume, use Up or
Down key to adjust the volume.
3. Left and Right keys are there to adjust frequency, 0.1MHz is in-
creased or decreased each time you press Right or Left key.
4. Auto search FM channel, phone set can search the next available
channel.
5. Can save maximum 10 channels that you preset earlier. And you
can browse and delete the saved channels.
6. Only phone speaker is supported to listen to FM radio. FM radio will
be automatically closed if handset off hooked or HANDS-FREE key
enabled or phone set is turned on/off.
To receive FM radio, you should :
1. Select MenuToolsFM radio or press the Right key in standby
mode, the FM channel bars is shown on the screen.
2. Press Left key or Right key to select channels manually. Press Up
key to increase volume, and press Down key to decrease volume.
You can search the available FM channels automatically, select
OptionsAuto search in FM radio mode to listen to the available channel.
Perform the action again to move to the next available channel. Select
OptionsSave to save the current channel in Channels, you can save
maximum 10 channels in Channels.
To set frequency manually, select OptionsSet frequency in FM radio
mode, type frequency number from keypad, select OK to confirm.
To listen to the channel you saved in the Channels, select Options
Channels in FM radio mode, use Up or Down key to select. You can
play or rename or change or delete the channel from Options menu.
Text Input
Operation Method
Multitap Input—“ABC” or “abc”, press cor-
responding letter key till the letter appears.
Press # key to switch between capitalization
and lowercase.
eZiText Input—“Eng”, press the Number
keys to input the characters of the word.
Numbers Input—“123”, press the Number
keys to input the digits you want directly.
Press * key, and then select corresponding
symbol by using Scrolling keys.
Press “1” key till the symbol (common
symbols) appears under Multitap input
mode.
Apart from Numbers input mode, press “0’’
key to add space.
Press NAMES/CLR/BACK key.
Input Letters
Input Words
Input Digits
Input Symbol
Input Space
Erase Character

Do not expose your phone to direct sunlight or store it in hot areas.
High temperature can shorten the life of electronic devices.
Prevent liquid from leaking into your phone.
Disconnect external power supply and do not use your phone during
thunderstorm.
Unplug the external power adapter or remove battery when your
phone is not in use, esp. for a long period of time.
It is highly recommended to charge the battery before initial use. The
battery might have been discharged during storage and delivery.
Do not unplug the connector of the data cable from the phone, and
not install or remove battery, when the power is on.
Do not attempt to disassemble the phone by yourself. Non-expert
handling of the devices may damage them.
The phone is non-waterproof, keep it dry and store in shady and cool
place.
If you want to clean your phone, please use clean fabric that is a bit
wet or anti-static. Do not use harsh chemical cleaning solvents or
strong detergents to clean your phone, such as alcohol, dilution
agent and benzene. Power off your phone before you cleaning it.
Limited Warranty
This warranty does not apply to defects or errors in the Product
caused by:
(a) Reasonable Router Appearance Disfiguration.
(b) End User’s failure to follow ZTE’s installation, operation or mainte-
nance instructions or procedures.
(c) End User’s mishandling, misuse, negligence, or improper installation,
disassemble, storage, servicing or operation of the Product.
(d) Modifications or repairs not made by ZTE or a ZTE-certified individual.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, inciden-
tal or consequential damages resulting from or arising out of or in
connection with using of this product, whether or not ZTE had been
advised, knew or should have known of the possibility of such damages,
including, but not limited to lost profits, interruption of business, cost of
capital, cost of substitute facilities or product, or any downtime cost.
Batchoperation Copy/moveall the ContactsOptions
contactinformation between Batch operation
SIM card and phone. Delete
all contacts in SIM card or phone.
Create message Create message and MenuShort Messages
send to others. Newmessage
Readmessage Read message in Inbox, MenuShort Messages
Outbox,Draftbox. Inbox/Outbox/Draftbox
Templates Somepreformatted messages. MenuShort MessagesMsg
message settingsTemplates
Message center Set the service provider’s MenuShortMessagesMsg
message center number. settingsMessagecenter
Message validity Set how long the saved MenuShort MessagesMsg
message is valid. settingsMessage validity
Status Report Set to let service provider network MenuShort MessagesMsg
send message to inform your settingsStatus report
messagereached
successfully or not.
Storage media Set where to save the MenuShort MessagesMsg
short message. settingsStoragemedia
Used space of View the number of saved MenuShortMessages
messages messagesand maximum number Msg settings Used space
of messages capacity in
phone and SIM card.
Voicemail Receive and listen to Voice mail MenuShort Messages
messages. Set voice mail number. Voicemail
Recent calls View or dial all recent calls, MenuCall MenuCalls
including received calls,
dialled calls, missed calls.
Call forwarding Forward an incoming call to a MenuCall MenuDiverts
designatedphone number.
Firewall Set Incoming Calls Bar. MenuCall MenuFirewall
Language Set language for phone. MenuSettingsPhone
settingsLanguage
Shortcutkey Set the scrolling key as MenuSettingsPhone
shortcut key of some menu. settingsFastkeysettings
Keypadlock Lockthe keypad automatically. MenuSettingsPhone
Press # key, then* key to unlock. settingsAutolock keypad
Backlight Set the backlight On/off when MenuSettingsDisplay
using the phone. settingsBacklight
Ring tone Set Ring tone of the phone. MenuSettingsAudio settings
Ringtone
Volume Set the volume of ring tone MenuSettingsAudiosettings
or speaker. Ringtone/Speakervolume
Keytone Enable or disable key tone. MenuSettingsAudio
settingsKeytones
Warntone Enable or disable warn tone. MenuSettingsAudio
settingsWarntone
Missed alert Enable missed alert or not. Menu SettingsAudio
settingsMissed alert
Message alert Select type of tone to prompt MenuSettingsAudio
when there is message. settingsMessage alert
Power on/off ring Ring or not when powering MenuSettingsAudio
on/offthe phone. settingsPower on/off ring
Date and Time Set date and time for phone. MenuSettingsClock
settingsDate & Time
Date format Setthe date format for phone. MenuSettingsClock
settingsDate format
Minute minder Set minute minder. MenuSettingsCall
settingsMinute minder
Connectedminder Set connected minder. MenuSettingsCall
settingsConnectedminder
Call waiting Put the current call on hold to MenuSettingsCall
answer the other incoming call. settingsCall waiting
Network Settings Setthe way of searching network. MenuSettings
Network settings
PIN code Change or set the PIN code MenuSettingsSecurity
for the SIM card. settingsSIM password
Phonelock Set or change the phone lock code. MenuSettingsSecurity
settingsPhonelock
Network call bar Theservice provider will offer MenuSettingsSecurity
you Network password to settings Network call bar
activate Network Call Bar.
Alarm clock Set alarm clock time. MenuToolsAlarmclock
Calculator Execute basic math calculation. MenuToolsCalculator
FM radio Listen to FM radio. MenuToolsFMradio
STK SIM Card Tool Kit (may be MenuSTK
different because of
different SIM card).
Function Description Selection Function Description Selection Function Description Selection Warning and Maintenance
Some electronic devices are susceptible to electromagnetic interfer-
ence sent by the phone if inadequately shielded. Keep using the
phone at least 20 cm or as far away as you can from TV sets, radio
and other automated office equipment so as to avoid electromag-
netic interference.
Operating the phone may interfere with medical devices like hearing
aides and pacemakers, or other medical devices in hospital. Consult
a physician or the manufacturer of the medical device before using
the phone.
Be aware of the usage limitation when using the phone at places such
as oil warehouses, or chemical factories, where there are explosive
gases or explosive products being processed, because even if your
phone is in idle state, it still transmits radio frequency (RF) energy.
Therefore, power off your phone if required.
Do not touch the antenna while calling. Otherwise it will affect the
quality of calling and waste battery energy. The damaged antenna
will cause slight burn while touching your skin.
Keep the antenna free from obstructions and position the antenna
straight up. This will ensure best call quality.
Keep the phone out of the reach of small children. The phone may
cause injury if used as a toy.
Do not put other things on the terminal to avoid overlaying radiator.
Use original accessories or accessories that are authorized by the
manufacturer. Using any unauthorized accessories may affect your
phone’s performance, and violate related national regulations about
telecom terminals, or even endanger your body.
As your phone can produce electromagnetic field, do not place it
near magnetic items such as computer disks.
Troubleshooting
If your phone appears following phenomenon in the process of application,
read following relative information at first. If the problems still can not be
solved, please contact with the distributor or service provider.
Problem Check Point
Input your PIN1 code which offered with
SIM card together. If you have changed
PIN1 code, input the new PIN1 code.
Check whether valid SIM card is inserted
or not.
Enter phone code you set already to un-
lock the phone.
Check volume setting of ring tone.
Check whether the battery switch is turn
to “ON”, whether the battery has
electricity, or it is damaged; or power on
the phone again.
Check whether you have set Network
Call Bar.
Check whether the number is restricted
to come.
Check the network condition, or message
centre setting.
First refer to user guide, then check
whether the power is connected correctly
or not, if there is no problem, restart the
phone.
When switching on the
phone, it prompts “Enter
PIN 1”.
When switching on the
phone, it prompts
“Emergency Only”.
When switching on the
phone, it prompts “Enter
phone code”.
No ring tone prompt for
a incoming call.
No display on screen
when disconnect external
power supply.
Press CALL/REDIAL key,
but no number is sent.
Certain call cannot be
received.
Cannot send short
message.
Other abnormal
phenomenon.
910 11 12 13 14 15 16
(e) Power failures, surges, fire, flood, accident, actions of third parties
or other events outside ZTE’s reasonable control.
(f) Usage of products of third Parties, or usage in conjunction with third
party products provided that such defects is due to the combined
usage.
(g) Any other cause beyond the range of normal usage for Products.
End User shall have no right to reject, return, or receive a refund for
any product from ZTE under the above-mentioned situations.
This warranty is end user’s sole remedy and ZTE’s sole liability for
defective or nonconforming items, and is in lieu of all other warranties,
expressed, implied or statutory, including but not limited to the im-
plied warranties of merchantability and fitness for a particular purpose,
unless otherwise required under the mandatory provisions of the law.
Menu Function
Hereinafter are brief instructions for menu functions of the phone.
Operation Method
Move cursor
Change input mode
Press NAMES/CLR/BACK key till all the
characters been erased.
Press Scrolling keys.
Press # key to change text input mode.
Erase all the
characters
Search contact Search for a contact entry. ContactsOptionsSearch
Edit contact Editthe saved contact. ContactsOptionsEdit
Delete contact Delete the saved contact. Contacts OptionsDelete
Addcontact Save phone number. ContactsOptions
Add new Contact
Contact details View the details of the contact, ContactsOptionsDetails
and perform other operations
in details.
Add to speed Add th e se lected num ber Co ntactsOptionsDetails
dial list to speed dial list. OptionsAdd to speed
Savenumber to Set where to save the number, ContactsOptionsSettings
media SIM card or phone. SaveNo. to
Used space View the number of saved entries ContactsOptionsSettings
of contacts and maximum number of entries Used space
capacity in phone and SIM card.
Speed dial list View speed dial list. ContactsOptions
SettingsSpeed dial list
Function Description Selection