ZUMEX essential User manual

User’s manual · Manual de usuario · Manuel de l’utilisateur
Bedienungsanleitung · Manuale d’uso
Essential Pro
SIMPLICITY AT WORK
Versatile Pro
MULTI-LEVEL PERFORMANCE

English · user´s manual
Español · manual de usuario
Français · manuel de l´utilisateur
Deutsch · bedienungsanleitung
Italiano · manuale dell’utilizzatore
10
34
58
82
106

MT
ES
Drawing
Figuras
Figures
Abbildung
Figure

Diagrams with Parts: Essential Pro
10
11 12 613 14 15
17
16
1
2
3
4
5
7
9
8
18
11
12 13
614
15 1
2
3
4
5
6
9
8
10
16
7
Diagrams with Parts: Essential Basic

Fig. 4
Fig. 1 Fig. 2 Fig. 3
Fig. 5
Diagrams with Parts: Versatile Pro Zumex Essential Basic
Zumex Essential Pro Zumex Versatile Pro
OFF (Red) ON (Green)
3
Fig. 15
15
17
16
1
2
14
13
6
10
11
9
8
18
19
20
15

Fig. 6 Fig. 7
Fig. 8 Fig. 9
Fig. 10 Fig. 11A
Fig. 12A
Fig. 14 Fig. 15
Fig. 12B Fig. 13
90º
Frutas
21
22
12
7
4
5
15

11
EN
3
12
15
16
31
130
General index
Figures
Important general information
Technical features
Usage instructions
Fault detection
EU declaration of conformity
Zumex reserves the right to modify the information
contained in this manual without prior notice.
General description
Preparation
Operation
Cleaning
1Step Extraction Kit
Elevation kit
Accessories
16
17
17
25
27
28
30
This manual refers to the following models:
Countertop models
Zumex Essential Basic
Zumex Essential Pro
Zumex Versatile Pro
Models with stand Zumex Versatile Pro Podium
Extend your warranty to 5 years
By registering your product on our website
within the first 3 months
Register your
product here
Zumex Essential l Versatile
User´s manual
Please read the instructions carefully in order to make the most of your
machine.

13
EN
Before you start, we recommend you to take the
following precautions into account:
• The specific details about your Zumex juicer (voltage, frequency
and other data of interest), can be found on the Identification Label
attached to the actual machine.
• Remember that if you have any technical queries, you should get in
touch with your Regular Dealer / Official Technical Support Service,
always stating the Serial Number on the machine Identification Label.
• Zumex adopts the necessary measures to ensure that the machines
placed on the market are selectively collected and managed in an
environmentally respectful manner. Please contact your authorised
Zumex dealer to correctly dispose of these machines.
• Do not manipulate the machine in such a way
that it works without safety elements.
• This appliance can be used by children over
the age of 8 or older, or by people with impaired
physical, sensorial or mental capacities or who lack
experience or knowledge, if they are supervised
or have received adequate training with respect
to the safe operation of the appliance and they
understand the risks entailed.
• Children should be supervised to make sure they
do not play with the appliance.
• The cleaning and maintenance to be performed
by the user must not be carried out by children
without supervision.
• Do not spray the appliance with water to clean it.
• Do not use other different fruit to that specified
in the manual.
• Whenyou clean, perform maintenance or replace
parts, make sure that you have always unplugged
the power cable from the socket and it is visible.
• Use the cutting elements with great care, to
avoid possible cuts.
• The parts that are in contact with food must be
cleaned according to the instructions that you can
read in the cleaning chapter.
• If the power cable is damaged, it must be
replaced with a cable or special unit to be supplied
by the manufacturer or by the after-sales service.
Important general information

15
EN
The instructions may be updated. You can consult the updated instructions on
our website www.zumex.com, in the section of the selected model.
If you have any suggestions or comments that you believe may improve
our machines or service network, please get in touch with Zumex directly
at the address below:
ZUMEX GROUP, S.A.
Polígono Ind. Moncada III C/Molí 2. 46113 Moncada. Valencia. Spain.
Tel. [phone] · Fax: [phone]
[e-mail] / www.zumex.com
ZUMEX SERVICE
Tel. [phone] · [e-mail]
Technical Features
Essential
Basic
Essential
Pro
Versatile
Pro Podium
Oranges per
minute: 22 22 22
Dimensions
(cm/inch):
47 x 50 x 88 cm
18.5 x 19.7”x 34.6”
47 x 50 x 75 cm
18.5”x 19.7”x 29.5”
48 x 55 x 85,5 cm
18.9”x 21.7”x 33.7”
48 x 55 x 166 cm
18.9”x 21.7”x 65.3”
Net Weight
(Kg/lb): 45 Kg | 99,2 lb 45,75 Kg | 100,8 lb 54 Kg | 119 lb 33 Kg | 72,8 lb
Consumption
and Voltage:
380 W for
220-240 V 50 Hz
220 V 60 Hz
320 W for
115V 60 Hz
380 W for
220-240 V 50 Hz
220 V 60 Hz
320 W for
115V 60 Hz
380 W for
220-240 V 50 Hz
220 V 60 Hz
320 W for
115V 60 Hz
Protection: IPX4 IPX4 IPX4
Safety:
Dual magnetic
safety sensor.
Electronic motor
protection.
Dual magnetic
safety sensor.
Electronic motor
protection.
Dual magnetic
safety sensor.
Electronic motor
protection.
Size of fruit: 65-81 mm
(45-67 mm
with Kit S)
65-81 mm
(45-67 mm
with Kit S)
65-81 mm
(45-67 mm
with 1Step Kit S)
Anti-drip
system: NO YES YES

17
EN
Usage Instructions
General Description
Zumex Essential ProZumex Essential Basic Zumex Versatile Pro
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Juice container
Filter container
Zumex cover
Lower pressing unit
Upper pressing unit
Orange peel buckets
Right peel ejector
Fastener support cap
Button rubber protec-
tion
Blade holder
Feeder tube kit
Cover catch
Left peel ejector
Tray filter
Drip tray
Plastic securing knob
Juice container
Filter container
Zumex cover
Lower pressing unit
Upper pressing unit
Orange, silver or gra-
phite peel bucket
Right peel ejector
Fastener support cap
Blade holder
Feeder tube kit
Cover catch
Left peel ejector
Tray filter
Drip tray
Plastic securing knob
Complete faucet kit
Faucet button
Sleeve
Juice container
Filter container
Zumex cover
Lower pressing unit
Upper pressing unit
Orange, silver or gra-
phite peel bucket
Right peel ejector
Fastener support cap
Blade holder
Feeder tube kit
Cover catch
Left peel ejector
Tray filter
Drip tray
Plastic securing knob
Complete faucet kit
Faucet button
Sleeve
Plate base
Plate kit
Front holder
Rear holder
To start squeezing you must follow the steps below:
Unpack your juicer and place it on a surface as horizontal as possible.
Ensure that the mains power falls within the margins indicated on the
Identification Label of the machine which you will find both on the cover
page of this manual as well as on the machine itself.
Place the peel buckets as indicated in Fig. 1 and 4.
Make sure that the juice container and its filter are placed correctly and that
the cover is closed and secured by the catch.
ZUMEX ESSENTIAL BASIC. Before starting the unit, place the orange feeding
tube in the position shown on Fig. 2. Use the 4 mm Allen key supplied with the
machine.
If you have acquired a juicer with a podium, you must place the juicer on the
podium, screw it as indicated in the instruction supplied on the podium. Don’t
forget to secure the front wheels. Then place the hopper and the peel buckets
with an open base which you will find inside the stand (Fig. 5).
Essential Basic
Place a glass / jug under the juice outlet and press the green button (Fig. 3).
The machine will start to operate when you press the button. To stop the
juicer, press the red button.
Essential Pro y Versatile Pro
Once the previous steps have been followed, connect the connecting plug to a
socket base fitted with a standardized ground. And press the sleeve button
to start up the machine. When you turn on the machine for the first time after
purchase, a message will appear: “Select language” in order to select the
operating language of the machine.
The choice can be made using the arrows and pressing “ON”. Once selected,
the machine will be ready for operation in “Self-Service” mode.
Preparation
1
2
3
4
Operation

19
EN
Operating Modes with Zumex Essential Pro
Zumex Essential Pro can work in two operating modes:
Autostart: The machine detects the oranges in the feeder tube and starts up
as the oranges pass by.
Self-service: The machine starts up by activating the self-service faucet either
by pressing the faucet or by activating the switch lever; in order to be able to
operate with this switch lever see Fig. 12A and 12B. In this mode you can also
work continuously by turning the faucet block 90º (Fig. 13).
Selection of operating mode:
Press the MENU key for a few seconds to enter the programming mode.
Select the WORKING MODE option by positioning the cursors over it
and pressing ON to confirm your selection.
Select the desired working mode, Autostart or Self-Service using the cursors
and press on to confirm your selection. Press OFF several times until you
exit MENU.
Operating Modes with Zumex Versatile Pro
Zumex Versatile can operate in two working modes:
Professional: You can programme the no. of oranges to be squeezed in each
cycle using the cursors , and you can programme up to 20 oranges in each
cycle or select the ‘c’ option to squeeze continuously. The squeezing will start by
pressing ‘ON’ and it will end after ceasing to squeeze the no. of oranges pro-
grammed or if you press ‘OFF’.
Self-service: The machine starts up by activating the self-service faucet either
by pressing the faucet or activating the switch lever. You can also work conti-
nuously in this mode by turning the faucet block 90º (Fig. 13).
1
2
3
As a general rule, to operate within the menu, we can regard the “ON” button
as accept and “OFF” as cancel.
Selection of the operating mode:
Press the MENU key for a few seconds to enter the menu.
Select the WORKING MODE option by positioning the cursors and
pressing ON to confirm your selection.
Select the desired working mode, Professional or Self-Service using the cursors
and pressing ON to confirm your selection. Press OFF several times until
you exit MENU.
Configuration
Your Zumex juicer allows you to adjust the parameters according to your prefe-
rences. All adjustments are made at MENU > CONFIGURATION. Press the MENU
key for a few seconds to enter the menu and select CONFIGURATION, press ON
to confirm your selection.
Lighting: Changes the screen brightness level.
On the CONFIGURATION menu select LIGHTING and press ON to confirm your
selection. Adjust the brightness level using the cursors . Once adjusted, con-
firm by pressing ON. The changes will be memorised.
Language: Changes the juicer menu language.
On the CONFIGURATION menu select LANGUAGE and press ON to confirm
your selection. Select the language desired using the cursors . Once selec-
ted confirm by pressing ON. The changes will be memorised.
Offset: Depending on the type of fruit to be squeezed, the value can be adjus-
ted for its optimum counting.
Select OFFSET and press the ON key and you will be immediately asked
for your PIN. If you don’t have one, consult your Technical Service. Then you
configure the desired number using the cursors . Once the adjustment has
been concluded, press ON to save the changes. This operation must only be
carried out under the supervision of an authorised Technical Service.
1
2
3
Note: Remember that if you press OFF, you will cancel any
changes made before and you will return to the previous menu.

21
EN
Technical Service
The Zumex Essential Pro and Versatile Pro juicers provide you with the in-
formation you need for correct unit maintenance. They are also fitted with
a squeezed orange counter which can be configured in this mode. Press the
MENU key for a few seconds to enter the menu and select TECHNICAL SER-
VICE, press ON to confirm your selection and OFF to return to the previous
menu.
Serial number: This shows you your juicer’s serial number which is essential for
any TECHNICAL SERVICE consultation.
On the TECHNICAL SERVICE menu select SERIAL NUMBER and press ON to
confirm your selection. You can see the serial number on the screen. Return to
the previous menu by pressing OFF.
Voltage: This shows you the mains voltage at the time of the consultation,
vital for any Technical Assistance Service.
On the TECHNICAL SERVICE menu select VOLTAGE and press ON to confirm
your selection. You can view the voltage on the screen. Return to the previous
menu, pressing OFF.
Calibration: This shows you the calibration value of your machine which must
be adjusted in exceptional cases when the counter is not counting correctly.
This information is vital for any Technical Assistance consultation. It also lets
you change the values manually. This procedure must only be carried out at
the indication and with the aid of an authorised Technical Assistance Service.
Calibration value: On the TECHNICAL SERVICE menu select CALIBRATION
> CALIBRATION VALUE and press ON to confirm your selection. You can
view the calibration number on the screen. Return to the menu, pressing
OFF.
Offset Value: On the TECHNICAL SERVICE menu select CALIBRATION
> OFFSET VALUE and press ON to confirm your selection. You can view the
offset number on the screen. Return to the menu, pressing ON.
Calibrate: Select CALIBRATE and press ON. Next, set your PIN number and
press ON. The machine will ask for confirmation: ‘Calibrate?’, press ‘ON’
to confirm the automatic calibration. The machine will then carry out said
calibration and display the adjusted calibration value. Return to the menu,
pressing OFF.
This option must only be carried out under the supervision of the Technical
Service and when it has been specifically indicated.
Pin: Your juicer has a password so you can access the counters and modify
configuration parameters. The standard programmed PIN is 0000 but you
can personalise this PIN. On the TECHNICAL SERVICE menu select PIN and
press ON to confirm your selection. If this is the first time you have changed
your PIN, the standard PIN 0000 will appear and press ON; if you have already
programmed a password previously, enter the old password, use the cursors
to select each digit, press OFF to move from digit to digit and ON to
confirm the password. Upon entering the correct PIN the “New PIN” screen will
appear. Programme the new password, select each digit with the cursors ,
press OFF to move from digit to digit and ON to confirm the new PIN.
If you forget the Pin number programed, you will be required to reset
machine’s MENU. In order, to do that, enter CONFIGURATION press button,
and while pressed, press button simultaneously.
Counters: You can control the counter and discounter of your juicer. The
counter allows you to establish the no. of oranges squeezed, the discounter
function allows you to programme a given no. of oranges and gradually
consume oranges from this total.
Partial counter: This shows you the no. of oranges consumed and it can be
set to zero. On the TECHNICAL SERVICE menu select COUNTERS > PAR-
TIAL COUNTER and press ON to confirm your selection. Enter your PIN (Re-
member: Select each digit with the cursor , press OFF to move from
digit to digit and ON to confirm the password). You can view the number
of oranges squeezed on the screen. To set the counter to zero press and
confirm using ON and on the machine display you will see that the counter
has been set to zero. Return to the menu, pressing OFF repeatedly.

23
EN
Total counter: This shows you all the oranges consumed throughout the life
of the juicer, this counter cannot be deleted.
On the TECHNICAL SERVICE menu select COUNTERS > TOTAL COUNTER
and press ON to confirm your selection. You can view the number of oran-
ges on the screen. Move up to the upper menu by pressing OFF.
Discounter: This allows you to programme a given no. of oranges and
gradually consume oranges from this total. On the TECHNICAL SERVICE
menu select COUNTERS > DISCOUNTER and press ON to confirm your
selection. Enter your PIN (Remember: Select each digit using the cursors
, press OFF to move from digit to digit and ON to confirm the
password) and you will enter the discounter menu. Programme each digit
of the discounter using the cursors and after each digit press OFF
to move on to the next one and repeat this action for each digit; on the
last digit press ON and the selection will be memorised automatically.
Then select whether you want the discounter to be visible or not on the
main menu (visible/concealed option). Return to the menu, pressing OFF
repeatedly.
Once the discounter is at zero, the juicer will stop until a new sum
of oranges is loaded or a change is made to the counter function,
entering the “MAIN COUNTER” menu and confirming by pressing ON.
When the visible discounter has been programmed, a ‘D’ will appear
on the normal operating screen in front of the counter digits. If
the concealed discounter has been programmed, no figure will be
displayed.
0000
0000
Summary of Zumex Essential Pro and Versatile Pro Operating Modes
Professional
Language
English
1/23
Working mode
Configuration
Technical Service
Working mode
Configuration
Technical Service
Professional
Professional
Lighting
Language
Offset
Lighting
Lighting
Language
Offset
231
97
30
Working mode
Configuration
Technical Service
Serial number
Voltage
Calibration
Pin
Counters
Serial number
Voltage
Calibration
Pin
Counters
Serial number
Voltage
Calibration
Pin
Counters
Calibration value
Offset value
Calibration
Calibration value
Offset value
Calibration
Offset value
Calibration value
Voltage
Serial number
Calibration value
Offset value
Calibration
Calibration
Calibration?
Calibration Calibration
Fruits
Pin ? Offset
Lighting
Language
Offset
0000
30
85
03

25
EN
Summary of Zumex Essential Pro and Versatile Pro Operating Modes
Delete ?
Serial number
Voltage
Calibration
Pin
Counters
Serial number
Voltage
Calibration
Pin
Counters
New Pin
Partial Counters
Total Counter
Discounter
Partial Counters
Total Counter
Discounter
Partial Counters
Total Counter
Discounter
Partial Counters Partial Counters
Total Counter
Discounter Visible
Concealed
Visible
Concealed
76
10
000000
0
6
5
4
Zumex recommends cleaning the machine at least once or twice a day,
depending on how much it is used in order to maintain optimal food hygiene
conditions.
For correct cleaning you must follow the steps below:
All models
WARNING! Turn the machine off at the mains before cleaning process.
Disassemble the container and the juice filter (Fig. 10).
Disassemble the faucet (Fig. 11A).
Disassemble the front cover.
Essential Basic, Essential Pro
Disassemble the blade holder (Fig. 7) pulling it towards you by the handle.
BE CAREFUL! Handle this part with great care as you may cut
yourself.
Remove the peel ejectors from their supports (Fig. 8).
Disassemble the pressing units in pairs after unscrewing the securing
knobs (Fig. 9).
Versatile Pro
Remove the 1Step Extraction Unit (Fig. 14-15)
There are two possibilities when cleaning:
• Complete cleaning: once the unit has been removed from the machine,
get rid of extra pulp and peel if there is any washing it with water and if
necessary a mild soap. The whole unit is also dishwasher safe.
• Deep cleaning: all of the components can be removed and can be
cleaned individually. Zumex recommend this type of deep cleaning at
least once a week depending on how much usage the machine gets.
Cleaning
1
!
!
2
4
3

27
EN
Remove the Blade holder (9) and clean it carefully taking care not to hurt
yourself.
•The plastic parts of the squeezing system are suitable for cleaning in a
dishwasher.
•We would not recommend cleaning the juice cover and tray in the
dishwasher. Following this tip increases its durability. For cleaning both
parts use a soft cloth soaked in soap and water suitable for crockery. Under
no circumstances must abrasive products be used nor any anti-lime scale
product.
•The juice tap and tray must be separated for their correct cleaning,
preventing dirt from accumulating between both. The tap may be cleaned in
the dishwasher.
•When cleaning the squeezing and cover area you should use a soft cloth
dipped in water and washing-up liquid. Then rinse thoroughly in clean water so
no soap remains.
•Once the cleaning process has finished, you must assemble all the elements
in reverse order to their disassembly. Make sure that all the parts have been
correctly assembled and secured.
•Remember that each peel ejector (Fig. 8) only fits on one side and so they are
not interchangeable. When you place them make sure that you insert the peel
ejector paddle right down to the end of the lower pressing unit.
•In order to avoid the accumulation of wax it is important to clean the fruit
feeder frequently of Zumex Versatile Pro models.
•On models with a base stand clean the hopper and the inside of the stand,
making sure to eliminate any peel or pulp remains.
51Step Extraction Kit
This device allows for easy insertion and removal of the pressing units and peel
ejectors in just one step (Fig. 14).
Before installation remember to insert the Blade holder (9).
To install, line up the pressing units with the shafts and adjust their position
while sliding them in. Use the central knob to attach the device to the
machine.
Note: To remove simply reverse the process.
Disassembly of the device
a) Unscrew the Securing knob (15) which is between the pressing units and
holds both of the metal holders (21-22)
b) Carefully remove the Front holder (21).
c) Remove the Peel ejectors (7-12) and separate the lower (4) and upper (5)
Pressing units. See Figure 15.
Assembly of the device
a) Place the Rear holder (22) on a flat surface. The peel ejector brackets
should be face down.
b) Line the upper and lower pressing units up to each other. Put the circular
bases of the pressing units into the holes in the holder. Remember that the
pressing units are different to each other, ensure that they are installed as
shown in the diagram.
c) Fit the peel ejectors onto the metal holders of the unit leaving the
extractor positioned on the lower pressing unit.
d)Fit the protruding cones of the pressing units into the four circular bushes
of the front holder (21).
e) Attach both holders with the Securing knob (15).

29
EN
Elevation Kit
This Zumex machine has an Elevation Kit to make it easier to clean the surface
where it is located. Elevation Kit ref. 05230* is not included in this model, it is
available in the machine accessory catalogue.
This Kit must be mounted according to the following instructions:
Components
1
Installation
The machine comes prepared for this Kit to be simply and quickly installed.
Place machine in assembly position.
Carefully place the machine on one of its sides, previously protecting this
area to prevent damage to the machine. This operation must be carried
out between two people, so that the base of the machine is in view,
facilitating the work process (see Fig. 1).
Legs 4
Adhesive felt disc 4
Screw-in stud 4
Fig. 1
Fit the Elevation Kit legs.
There are four holes on the base of the machine marked in (Fig. 2), where
the legs go. The legs are supplied with some screw-in studs that are
already fitted into the ends of the legs. We must fully insert them into
the holes (A) on the base and then screw the legs in as far as they will go.
Once this operation has been carried out with all four legs, these can be
mounted and removed when required without the screw-in studs coming
out of their housing.
2
AFig. 2
3Put the machine back into its working position.
Carefully stand the machine back up again leaving it in its working
position.

31
EN
Accessories
There is a wide range of accessories available for you to make the most of your
machine:
1Step Extraction Kit
With this accessory you will be able to dismantle the machine in just 10
seconds and clean it under the tap or in the dishwasher.
* Including juice extraction system.
Kit S / 1Step Extraction Kit S
To juice fruit that has a diameter of 45 mm to 67 mm.
Countertop Kit
Integrates waste management keeping things practical and clean.
Elevation kit
This Zumex machine has an Elevation Kit to make it easier to clean the
surface where it is located.
Bottle set
For self-service restaurants - bottles, glasses or jugs of juice can be
distributed easily. Includes three trays (4 heights). It is integral to the
podium and the whole set can be transported with ease.
Zumex Pack
Fresh drinks can be packaged for commercialization, especially freshly
squeezed orange juice. There are 6 formats (1.5 l, 1 l, 75 cl, 50 cl, 33cl and 25
cl) and custom-made stickers.
Check www.zumex.com for more information on accessories for your
machine.
Detecting Faults
Fault Possible cause Correction
The machine doesn’t work Machine not plugged in. Plug it in.
No power is reaching the plug. Check the socket.
Cover not fitted properly. Make sure it has been fit
properly.
Juice container not fitted
properly.
Make sure it has been fit
properly.
Blocked pressing units. Turn off the machine at the
mains and unblock the pressing
units.
Safety sensors malfunctioning. Contact your technical service.
Faulty ON/OFF button. Contact your technical service.
Faulty circuit. Contact your technical service.
The machine blocks
frequently during juicing
Insufficient voltage. Check that the voltage matches
that indicated in the manual.
Faulty circuit. Contact your technical service.
The pressing units are not
synchronized
Fault in an axle. Contact your technical service.
Peel ejector breaks Peel ejector incorrectly fitted. Place it in its correct position
inserting it totally until
observing it has madecontact
(Fig. 8)
You can hear the motor
running but the pressing
units are not turning
Internal fault. Contact your technical service.

33
EN
WARNING: Any action to unblock the machine must be carried out
by disconnecting it from the mains. If, after making the checks stated here, the
machine does not work, call the technical service.
Fault Possible cause Correction
The faucet gets blocked The juice has seeds or too much
pulp.
Disassemble and clean the
faucet according Fig. 11A.
The machine stops every
now and again
Insufficient ventilation. Check that the appliance’s
ventilation grilles are not
blocked.
Overload. Contact your technical service.
Screen does not display
information
Alteration to mains systems. Turn off the machine and turn it
back on again.
The machine is in self-
service mode and won’t
stop operating
Faucet not fitted or fitted
incorrectly.
Fit the faucet in the manner
indicated in Fig. 11A
Faucet well fitted: possible
internal fault.
Contact your technical service.
Faucet block activated. Put the block in horizontal
position by pressing the faucet
downwards.
Screen Messages
*The message: “Keyboard error” may not appear on the display as there is no communication between the
CPU and the keyboard panel
Display Message Cause Correction
Excess current The maximum electrical
consumption level has been
exceeded for at least one
second.
Turn off at mains and turn
back on again.
No oranges The motor remains on for
two minutes detecting any
squeezing.
Put oranges back in feeder
again without and press ON.
Memory initiated A memory error has been
detected.
Contact your technical service.
Calibration An incorrect calibration value
has been detected.
Calibrate (See page 20).
Out of service The counter has reached zero. Modify the discounter value as
indicated in page 21 or move
on to counter function entering
PARTIAL COUNTER and
pressing ON.
Eeprom Error detected in EEPROM
memory.
Contact your technical service.
Out of range The input power voltage is
less than 80V or greater than
260V.
Contact your technical service.
Keyboard error (error 1) No communication with the
keyboard (Internal fault).
Contact your technical service.
Juice tray picture flashing Check the juice tray and front
cover are placed correctly.
Place the tray and cover in its
correct position as Fig. 4. If the
picture does not disappear,
contact your technical service.

MT
ES
Modelos de sobremesa
Zumex Essential Basic
Zumex Essential Pro
Zumex Versatile Pro
Modelos con mueble Zumex Versatile Pro Podium
El siguiente manual hace referencia a los modelos:
Amplía tu garantía a 5 años
Registrando tu producto en nuestra web en
los 3 primeros meses.
Registra aquí
tu producto
3
36
39
40
55
130
Índice general
Figuras
Información general importante
Características técnicas
Instrucciones de utilización
Detección de averías
Declaración UE de conformidad
Zumex se reserva el derecho a modificar sin previo
aviso la información contenida en este manual.
Descripción general
Preparación
Funcionamento
Limpieza
Kit de Extracción 1Step
Kit elevación
Accesorios
40
41
41
49
51
52
54
Zumex Essential l Versatile
Manual de usuario
Por favor, lea detenidamente las instrucciones para sacarle el máximo
rendimiento a su máquina.

MT
ES
Antes de comenzar, le recomendamos que tenga
en cuenta las siguientes precauciones:
• Los datos específicos de su exprimidora Zumex (tensión, frecuencia, y
otros datos de interés), se encuentran en la Etiqueta de Identificación
que encontrará en la propia máquina.
• Recuerde que para cualquier consulta técnica, debe ponerse en
contacto con su Distribuidor habitual / Servicio de Asistencia Técnica
Oficial, mencionando siempre el Número de Serie de la Etiqueta de
Identificación de la máquina.
• En el territorio español Zumex adopta las medidas necesarias para
que las máquinas puestas en el mercado sean recogidas de manera
selectiva y tengan una correcta gestión ambiental. Por favor, póngase
en contacto con su distribuidor autorizado de Zumex para desechar
correctamente estas máquinas.
• No manipule la máquina para hacerla funcionar
sin ningún elemento de seguridad.
• Este aparato pueden utilizarlo niños con edad
de 8 años y superior y personas con capacidades
físicas, sensoriales o mentales reducidas o falta
de experiencia y conocimiento, si se les ha dado
la supervisión o formación apropiadas respecto
al uso del aparato de una manera segura y
comprenden los peligros que implica.
• Los niños deberían ser supervisados para
asegurar que no juegan con el aparato.
• La limpieza y el mantenimiento a realizar por el
usuario no deben realizarlos niños sin supervisión.
• El aparato no debe ser limpiado con chorros de
agua.
• No utilice frutas diferentes a los especificados
en el manual.
•Durantelalimpieza,mantenimientoosustitución
de partes asegúrese que siempre tiene la clavija
del cable de alimentación retirada de la toma de
corriente y visible.
• Utilice los elementos de corte con mucho
cuidado, para evitar posibles cortes.
• Las partes que están en contacto con alimentos
deben ser limpiadas según las instrucciones que
podrá leer en el capítulo de limpieza.
Información general importante