ZyXEL Communications ONU-631HA Series User manual

ONU-631HA Series
Single Port Optical Network Unit with Transceiver
Quick Start Guide
Version 1.00
12/2006
Edition 2
Copyright © 2006. All rights reserved.

ONU-631HA Series Quick Start Guide
1
Introduction
The ONU-631HA is an optical network unit (ONU) that allows you to enjoy high-speed
Internet access over optical networks. The ONU-631HA comes with one fiber and one
Gigabit Ethernet port. No configuration is required. The ONU-631HA is truly a plug-and-
play device - all device configuration is done remotely by the OLT (Optical Line Terminal).
Once you have connected the hardware, you are ready to enjoy Internet access.
Two ONU-631HA models are discussed in this guide: ONU-631HA-11 (with a 10km
transceiver) and ONU-631HA-12 (with a 20km transceiver).
Package Contents
Check that you have the following in the product package.
• One ONU-631HA device
• One printed quick start guide
• One power adaptor for your region
• One Category 5 RJ-45 Ethernet cable
• One EMI suppressor clip (except Japan)
• One warranty card
1 Hardware Connections
1 GEPON:Connect an SC-type, single-mode optical cable to this port for Internet access.
"The GEPON port emits high-power laser light. Never expose your eyes to
its output!
12
3
4

ONU-631HA Series Quick Start Guide
2
2LAN:Use the included Ethernet cable to connect this port to a computer. To connect
more than one computer to the ONU-631HA, connect a switch to the Gigabit Ethernet
port.
3 EMI Suppressor Clip (except Japan): Take the following steps to install the included
Electro-Magnetic Interference (EMI) suppressor clip.
"Do not use the ONU-631HA without first attaching the EMI Suppressor Clip
(except Japan).
4POWER: Use only the included power adaptor to connect this power socket to an
appropriate power source.
• Open the suppressor clip. The clip should
be installed on the end of the power cable
that connects to the ONU-631HA, close to
the power jack.
• Lay the included power cable in the clip’s
internal cable channel.
• Pass the cable through the clip’s cable
channel a second time, making a cable
loop.
•Closetheclip.
1
2
3
4

ONU-631HA Series Quick Start Guide
3
1.1 Check the LEDs (Lights)
•ThePOWER LED turns steady on when you connect the ONU-631HA to the power supply.
•ThePON LED turns on when the fiber connection is available.
•TheLAN and SPEED LEDs turn on when the LAN port is properly connected.
The following table describes the LEDs in detail.
2 Test Your Internet Connection
After you have connected the hardware and turned on the ONU-631HA, open a web
browser on your computer and go to any web site (for example, www.zyxel.com) to test
your Internet connection.
Troubleshooting
1The POWER light is not on when I connect power to the ONU-631HA.
• Check that the power source is turned on.
• You might be using the wrong power adaptor. Use the included power adaptor only.
• If you are using the correct power adaptor, disconnect and re-connect the power
adaptor to turn on the ONU-631HA again.
• If the POWER light is still not on, use a different power outlet.
• If the problem continues, contact your local vendor.
2The PON light is off.
Label Color Status Description
POWER Green On The ONU-631HA is receiving power and is ready.
Off The ONU-631HA is not receiving power.
PON Green On Connection to the optical network is up.
Off Connection to the optical network is down.
LAN Green On The LAN port is connected to an Ethernet device.
Off No Ethernet device is connected to the LAN port.
SPEED Green On The LAN port is connected at 1000 Mbps.
Amber On The LAN port is connected at 100 Mbps.
Off No Ethernet device is connected to the LAN port.
DUPLEX Green On The Ethernet connection is operating at full-duplex mode
Off The Ethernet connection is operating at half-duplex mode or
the connection is down.

ONU-631HA Series Quick Start Guide
4
• Check the connector on the optical cable and the PON port. Make sure they are
clean and dust-free. Use an air duster to clean the connectors. Do NOT use a wet
cloth to clean the connectors.
• Check the optical cable. Make sure it is not broken. If the cable is broken, contact
your service provider to have the cable/connector replaced. Do NOT attempt to
replace the optical cable/connector yourself.
3I cannot connect to the Internet.
• Check the port connections and the lights.
• There might be problems with the optical network setting. Contact your service
provider.
Power Adaptor Specifications
NORTH AMERICAN PLUG STANDARDS
AC POWER ADAPTOR MODEL MU18-2120150-A1
INPUT POWER 100-240VAC, 50/60HZ, 0.6A
OUTPUT POWER O/P: 12VDC, 1.5A
POWER CONSUMPTION 18 W MAX.
SAFETY STANDARDS UL, CUL (UL 60950-1 FIRST EDITIONCSA C22.2 NO.
60950-1-03 1ST.)
EUROPEAN PLUG STANDARDS
AC POWER ADAPTOR MODEL MU18-2120150-C5
INPUT POWER 100-240VAC, 50/60HZ, 0.6A
OUTPUT POWER O/P: 12VDC, 1.5A
POWER CONSUMPTION 18 W MAX.
SAFETY STANDARDS ITS-GS, CE (EN 60950-1)
UNITED KINGDOM PLUG STANDARDS
AC POWER ADAPTOR MODEL MU18-2120150-B2
INPUT POWER 100-240VAC, 50/60HZ, 0.6A
OUTPUT POWER O/P: 12VDC, 1.5A
POWER CONSUMPTION 18 W MAX.
SAFETY STANDARDS ITS-GS (BS EN 60950-1)

ONU-631HA Series Quick Start Guide
5
Safety Warnings
For your safety, be sure to read and follow all warning notices and instructions.
• Do NOT use this product near water, for example, in a wet basement or near a swimming
pool.
• Do NOT expose your device to dampness, dust or corrosive liquids.
• Do NOT store things on the device.
• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of
electric shock from lightning.
• Connect ONLY suitable accessories to the device.
• Do NOT open the device or unit. Opening or removing covers can expose you to danger-
ous high voltage points or other risks. ONLY qualified service personnel should service or
disassemble this device. Please contact your vendor for further information.
• Make sure to connect the cables to the correct ports.
• Place connecting cables carefully so that no one will step on them or stumble over them.
• Always disconnect all cables from this device before servicing or disassembling.
• Use ONLY an appropriate power adaptor or cord for your device.
• Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in
North America or 230V AC in Europe).
AUSTRALIA AND NEW ZEALAND PLUG STANDARDS
AC POWER ADAPTOR MODEL MU18-2120150-A3
INPUT POWER 100-240VAC, 50/60HZ, 0.6A
OUTPUT POWER O/P: 12VDC, 1.5A
POWER CONSUMPTION 18 W MAX.
SAFETY STANDARDS EN 60950:2000
JAPAN PLUG STANDARDS
AC POWER ADAPTOR MODEL PSA18R-120P (ZA)-R
INPUT POWER 100-240VAC, 50/60HZ, 0.5A
OUTPUT POWER O/P: 12VDC, 1.5A
POWER CONSUMPTION 18 W MAX.
SAFETY STANDARDS JET

ONU-631HA Series Quick Start Guide
6
• Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product
where anyone can walk on the power adaptor or cord.
• Do NOT use the device if the power adaptor or cord is damaged as it might cause electro-
cution.
• If the power adaptor or cord is damaged, remove it from the power outlet.
• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a
new one.
• Do NOT remove the plug and plug into a wall outlet by itself; always attach the plug to the
power supply first before you insert it into the wall.
• Do not use the device outside, and make sure all the connections are indoors. There is a
remote risk of electric shock from lightning.
• Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.
This product is recyclable. Dispose of it properly.
Notices
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASS 1
PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11.
PRODUIT CONFORME SELON 21 CFR 1040.10 ET 1040.11.

ONU-631HA Series Quick Start Guide
7
Procedure to View a Product’s Certification(s)
1Go to www.zyxel.com.
2Select your product from the drop-down list box on
the ZyXEL home page to go to that product's page.
3Select the certification you wish to view from this
page.

ONU-631HA Series Quick Start Guide
8