ZyXEL Communications P-630-S Series User manual

P-630-S Series
ADSL USB Modem
Quick Start Guide
Version 1.0
7/2005

P-630-S Series Quick Start Guide
2
Overview
The Prestige 630-S (P-630-S) allows you to have high-speed ADSL Internet
access from a computer via a USB connection.
See the User’s Guide for more information on all features.
1 Installing the USB Driver
System Requirements:
• Windows 98 SE (Second Edition), Windows Me (Millennium Edition), Windows
2000 or Windows XP
or
Macintosh operating system versions 9.1 or later
• An available USB port
1.1 Windows
Screen shots for Windows XP are shown in the following procedure.
Note: You must start the driver setup wizard before connecting the
Prestige to your computer.
1Close all Windows programs and applications.
2Insert the CD that came with
your Prestige into the CD-ROM
of your computer. The main
screen displays as shown. Click
Setup. If the setup does not run
automatically, double-click
Setup.exe from the
CD.

P-630-S Series Quick Start Guide
3
3Wait until you are prompted to connect your Prestige's USB cable to the
computer.
Connect the USB cable to a USB port on your computer.
4When the installation is completed, you will see this window. Click OK to
close the wizard.
5Connect the Prestige’s DSL port to a telephone jack using the included
telephone wire.

P-630-S Series Quick Start Guide
4
The USB LED turns on when you have a successful USB connection. The DSL
LED blinks during DSL line initialization and turns steady green when the
Prestige has a DSL connection.
1.2 Mac
The following two sections describe how to install your and modem for both
Mac OS 9 and X.
Mac OS 9
Screens for Mac OS 9.2 are shown in this section.
1Close all programs and applications.
2Insert the included CD into the CD-ROM
drive. An icon for the CD appears. Double-
click the CD's icon.
3Double-click the Mac 9
driver folder.
USB
DSL

P-630-S Series Quick Start Guide
5
4Double-click
SM9A.1.0.C0.smi.sit.
5Select a folder or click Add to
create a new folder to where
you want to extract this .sit file
and click Choose.
6The file ADSLModem
2.0.20.smi will be created
in the folder you selected.
Double-click ADSLModem
2.0.20.smi.
7The ADSLModem 20.2 icon will display on the desktop.
Double-click ADSLModem 20.2.

P-630-S Series Quick Start Guide
6
8Double-click Driver.
9Double-click Installation of
ADSL Modem to install the
driver.
10Click Switch Disk to select
a destination (this must be
on an actual physical hard
drive on the Macintosh, not
a virtual drive) and click
Install.

P-630-S Series Quick Start Guide
7
11Click Restart to reboot
your computer and
complete the driver
installation.
Mac OS X
Screens for Mac OS 10.3 are shown in this section.
1Close all programs and applications.
2Insert the included CD into the CD-ROM drive. An
icon for the CD appears. Double-click the CD's
icon.
3Double-click the
Mac X driver
folder.

P-630-S Series Quick Start Guide
8
4Double-click
(SMXA.1.0.C0)B
1.sit.
5Select a folder
or click New
Folder to create
a new folder to
where you want
to extract this
.sit file and click
Choose.
6The file
ADSLModem.pk
gwill be created
in the folder you
selected.
Double-click
ADSLModem.pk
g to install the
driver.

P-630-S Series Quick Start Guide
9
7A welcome screen
appears. Click Continue.
8Click Continue.
9A screen displays asking
you to agree to the
agreement. Click Agree.

P-630-S Series Quick Start Guide
10
10You will then see the
Select a Destination
screen, select a
destination (this must be
on an actual physical hard
drive on the Macintosh, not
a virtual drive) and click
Continue.
11Click Upgrade.
12You then see a screen
telling you that you must
restart the computer after
the installation completes.
Click Continue
Installation. The driver will
automatically install.

P-630-S Series Quick Start Guide
11
13Click Restart to reboot
your computer and
complete the driver
installation.
2 Accessing the Internet
You will need your Internet access information such as user name and
password if given by your ISP.
Note: The VPI and VCI are 8 and 35 by default; if your ISP gave you a
different VPI and VCI, see the User’s Guide.
2.1 PPPoA or PPPoE Dial-up Connection
If you are using PPPoE or PPPoA encapsulation, you must dial up your
Internet connection like a traditional modem.
Note: If your ISP gave you an IP address, see also Section 2.2 on page
17 on how to configure a static IP address on your computer.
ISP
INFORMATION
CONNECTION METHOD YOU
ARE USING ACTION
None Bridge encapsulation with a
dynamic IP address
Open your browser and
surf the web.
A user name and
password
PPPoA or PPPoE encapsulation Go to Section 2.1 on
page 11.
An IP address only Bridge encapsulation with a static
IP address
Go to Section 2.2 on
page 17.

P-630-S Series Quick Start Guide
12
2.1.1 Windows
1After you install the driver and the
Prestige, the ADSL status icon will
appear in the system tray.
2Double-click the icon to
display the configuration
wizard and select the Setup
tab. Select a PPPoE or
PPPoA profile and click
Reinstall.
3The dial-up icon appears on
your desktop.
4Double-click the icon to configure
your user name and password for
Internet access. Enter the user name
and password that your ISP gave
you and click Dial.

P-630-S Series Quick Start Guide
13
2.1.2 Mac
Mac OS 9
1Click the Apple icon, Control Panels and
ADSL Modem to start the configuration
wizard.
2Click the Config tab, select a profile
and click Save.
3Click the Apple icon, Control Panels and TCP/IP.

P-630-S Series Quick Start Guide
14
4In the TCP/IP screen, select
PPP in the Connect via field.
Select Using PPP Server in
the Configure field or select
Manually and enter the IP
address given by your ISP.
Click the close button at the
top left corner and click Save.
5Click the Apple icon, Control Panels and Modem.
6Select PPPoA ADSL modem or
PPPoE ADSL modem in the Connect
via field and ADSL Modem Script in
the Modem field.
Click the close button at the top left
corner and click Save.
7Click the Apple icon, Control Panels and Remote Access.

P-630-S Series Quick Start Guide
15
8Select Registered User, enter the user
name and password that your ISP gave
you, enter any number in the Number
field and click Connect.
Mac OS X
1Click Finder,
Applications and ADSL
Modem.
2Double-click ADSL
Modem to start the
configuration wizard.

P-630-S Series Quick Start Guide
16
3Click the Config tab, select a
PPPoE or PPPoA profile and click
Save.
4Click the Apple icon and System
Preferences.
5Double-click Network.
6A New Port Detected screen opens when
the computer detects that the ADSL link
is up. Click OK.

P-630-S Series Quick Start Guide
17
7In the Network screen, select
Ethernet Adaptor (en x) in
the Show field. Click the
PPPoE tab and select the
Connect using PPPoE check
box. Type the information
from your ISP in the Service
Provider, Account Name,
Password and PPPoE
Service Name fields. Select
the Show PPPoE status in
menu bar check box. Click
Apply Now.
8Click the PPPoE status menu bar icon at the
right corner and select Connect.
2.2 Setting up Your Computer’s IP Address
Note: This section shows you how to configure an IP address on
your computer. You only need to do this if you were given an
IP address by your ISP.
2.2.1 Windows
Screens for Windows XP are shown in this guide unless otherwise specified.
Steps and screen shots may vary depending on the version of Windows.
1Click Start, Control Panel and Network Connections.

P-630-S Series Quick Start Guide
18
2Right-click on the icon that corresponds to your new USB connection (not
the one that corresponds to your network card) and select Properties.
3In the Properties screen, make sure
the Connect using field displays
"LAN/ATM/ADSL miniport". Select
Internet Protocol (TCP/IP) and click
Properties.

P-630-S Series Quick Start Guide
19
4Click Use the following IP Address
and fill in the IP address, Subnet
mask and Default gateway (given by
your ISP) fields. Click OK.
2.2.2 Mac
Mac OS 9
1Click the Apple icon, Control Panels and TCP/IP.
2In the TCP/IP screen, select
PPP, Routed ADSL Modem
or Bridged ADSL Modem in
the Connect via field and
Manually in the Configure
field. Fill in the IP address,
Subnet mask and Router
address (given by your ISP)
fields.
Click the close button at the
top left corner and click Save.

P-630-S Series Quick Start Guide
20
Mac OS X
1Click the Apple icon, System Preferences and Network to open the
Network screen.
2Select Ethernet Adaptor (en
x) that corresponds to your
new USB connection in the
Show field. Click the TCP/IP
tab and select Manually in
the Configure IPv4 drop-
down list box. Fill in the IP
address, Subnet mask and
Router (given by your ISP)
fields. Click Apply Now.
3 Troubleshooting
PROBLEM CORRECTIVE ACTION
None of the LEDs
turn on.
Make sure your computer is turned on.
Check the USB cable connections between the Prestige
and your computer.
Check the USB cable (see if the USB cable works with a
different USB device).
Carefully follow the instructions to uninstall and reinstall the
driver. See your User’s Guide on how to uninstall the driver.
If the error persists, you may have a hardware problem. In
this case, you should contact your local vendor.