ZyXEL Communications Prestige 971M User manual

Prestige 630M
ADSL USB Modem
Quick Start Guide
June 2001

Prestige 630 ADSL USB Modem Quick Start Guide
ii Table of Contents
Table of Contents
Chapter 1 Driver Installation........................................................................................................................1-1
1.1 NEEDED INFORMATION.................................................................................................................1-1
1.2 INSTALLING THE DRIVER..............................................................................................................1-1
Chapter 2 Install And Configure Your Modem............................................................................................2-1
2.1 REAR PANEL CONNECTIONS .........................................................................................................2-1
2.2 FRONT PANEL LEDS......................................................................................................................2-2
2.3 FRONT PANEL LED DESCRIPTIONS...............................................................................................2-3
Chapter 3 Troubleshooting...........................................................................................................................3-1

Prestige 630 ADSL USB Modem Quick Start Guide
Driver Installation 1-1
Chapter 1
Driver Installation
This chapter guides you through the software driver installation for Windows 98 Second Edition
(SE), 2000 and Millennium Edition (Me).
1.1 Needed Information
Before starting, close all open Windows programs and have your support CD handy. Also, make sure you
have the following information (supplied by your ISP and telephone company).
ASK YOUR PHONE COMPANY AND ISP FOR
THE FOLLOWING INFORMATION FILL IN THE BLANKS
Driver
LAN or WAN
VPI Number
Virtual Path Identifier number.
VCI Number
The Virtual Channel Identifier number.
Encapsulation Type
Choices depend on the driver selected, see the
Driver Types table.
Modulation Type
Choose from G.DMT, G.Lite, Multimode and
T1.413 modulation.
1.2 Installing the Driver
Step 1. Insert the support CD into the CD-ROM drive. Locate and double-click the Setup.exe icon to
bring up the Choose Setup Language screen as shown next.

Prestige 630 ADSL USB Modem Quick Start Guide
1-2 Driver Installation
Step 2. The Welcome window allows you to exit all Windows programs before continuing or quit the
setup procedure. When all Windows programs are closed, click Next > to bring up the
Software License Agreement window.
Step 3. Read the contents of the Software License Agreement window and click Yes to bring up the
Select ISP window.
Step 4. Highlight Other Service Provider in the Select ISP window. Then click Next > to bring up the
Select Driver Type window.
Windows 2000 users can ignore all Digital Signature Not Found alerts and click Yes to
continue.
Driver Types
Contact your telephone company to find out which driver to use.
DRIVER AND DESCRIPTION ENCAPSULATION CHOICES
RFC 1577 Classical IPoATM
RFC 1483 IPoATM Bridged LLC
RFC 1483 IPoATM Bridged VC
RFC 1483 IPoATM Routed LLC
LAN This driver resembles a LAN or Ethernet device.
Connection establishment is automatic.
RFC 1483 IPoATM Routed VC
RFC 2364 PPPoATM NULLWAN This driver resembles a dial-up modem. Call
establishment is performed through Dial-Up
Networking. RFC 2364 PPPoATM LLC
Choose the
language you
want to use
for setup.
Then click
OK.

Prestige 630 ADSL USB Modem Quick Start Guide
Driver Installation 1-3
Step 5. Select the driver type you want to install in the Select Driver Type window (shown below).
Step 6. Use the Communication Settings window to configure your VPI, VCI, encapsulation and
modulation settings. This information can be obtained from your ISP and telephone company.
Select the
driver you
want to
install.
Then click
Next >.
Enter your VPI. The
default for this
screen is 0.
Enter your VCI.
The default for this
screen is 88.
Select your
Enca
p
sulation.
Select your
Modulation.
Then click Next>.

Prestige 630 ADSL USB Modem Quick Start Guide
1-4 Driver Installation
Encapsulation field options depend on the driver you selected in the last step.
Step 7. The Start Copying Files window lets you review the current settings. Click Customize or
Back to change the settings. Click Next > to accept the current settings. The Setup Complete
window confirms that the files have been copied.
Step 8. Congratulations! You have successfully installed the driver for your modem. Click Finish and
proceed to the next chapter to install and configure your modem.

Prestige 630 ADSL USB Modem Quick Start Guide
Install and Configure your Modem 2-1
Chapter 2
Install and Configure your Modem
This chapter shows you how to connect your new hardware and configure your modem.
The P630 has two interfaces: a USB and an ADSL port. The interfaces transmit and receive data through a
USB cable and an ADSL line respectively. LED indicators indicate the operational status of your Prestige.
2.1 Rear Panel Connections
The following figure shows the rear panel connections of your Prestige.
Do not connect your USB device until you have installed the driver software for
your computer as described in the last chapter.

Prestige 630 ADSL USB Modem Quick Start Guide
2-2 Install and Configure your Modem
Step 1. First plug the square end of the USB cable into the back of your Prestige (see figures below),
and then plug the rectangular end of the USB cable into the back of your computer.
Plug this cable end into your Prestige Plug this cable end into your computer
Step 2. Plug one end of your telephone cable into the wall jack and the other end into the ADSL port on
your Prestige.
Messages are displayed as the modem is auto-detected and the software is
installed.
For Windows 2000 applications, the Found New Hardware Wizard window indicates
the modem has been installed. Click Finish.
Step 3. Follow the Windows instructions to get your new settings to take affect.
Once you restart your computer, installation of the ZyXEL ADSL USB Modem is complete.
2.2 Front Panel LEDs
The LED indicators on the front panel indicate the operational status of the Prestige 630. The table after the
following figure describes the LED functions.

Prestige 630 ADSL USB Modem Quick Start Guide
Install and Configure your Modem 2-3
2.3 Front Panel LED Descriptions
LED FUNCTION DESCRIPTION
USB USB Interface
and Modem
Power
Connection
This LED is off when the USB is not connected, has malfunctioned or is not
receiving power.
The LED is on when the USB is connected and receiving power.
ADSL ADSL Interface This LED is off when the link is not ready or has malfunctioned.
This LED is on when the ADSL link is up.
This LED blinks when the link is ready to connect or is initializing.