ZyXEL Communications P-660RU-T1 v3 User manual

www.zyxel.com
P-660RU-Tx v3
ADSL2+ Ethernet/USB Router
Version 3.40
Edition 2, 1/2009
QUICK START GUIDE
DEFAULT LOGIN DETAILS
IP Address http://192.168.1.1
Username admin
Password 1234
2009 ZyXEL Communications Corporation
C

ENGLISH
2
Introduction
The P-660RU-Tx v3 is an ADSL2+ router with firewall and both
Ethernet and USB ports.
What You Have to Do
• Install the USB driver
If you want to connect a computer to the USB port,
install the driver before you connect the device to the
computer’s USB port. Insert the included CD. The CD
runs automatically. Follow the steps in the screen to
install the USB driver.
•Connect the Hardware, see page 3
•Internet Access, see page 4
See the User’s Guide for more details on all features.

P-660RU-Tx v3
3
Connect the Hardware
1. DSL: Use a telephone wire to connect this port to a
telephone jack.
2. ETHERNET: Use an Ethernet cable to connect this port to
your computer’s Ethernet port.
3. USB: Use a USB cable to connect this port to your
computer’s USB port.
4. POWER: Use the included power adaptor to connect an
appropriate power source to this socket. Push the power
switch to the on position.
Do not connect the same computer to both the USB
and Ethernet ports on the P-660RU-Tx v3.

ENGLISH
4
Internet Access
You need your account information provided by your ISP,
such as user name, password, and so on.
1. Enter the default IP address http://192.168.1.1 in your
browser. Then type the user name (admin by default) and
password (1234 by default) in the login screen. Click OK.
2. Click Quick Start > Quick Start and follow the steps in the
wizard to configure the Internet connection. See the Quick
Start Wizard chapter in the User’s Guide for more details.

P-660RU-Tx v3
5

ENGLISH
6