ZyXEL Communications ARMOR X1 Quick start guide

Client Mode
Installation and firmware upgrade instruction
Repeater Mode
Installation and firmware upgrade instruction

Connect your computer to ARMOR X1
with an Ethernet cable

Power on your ARMOR X1 by connecting the power
adapter to it and plugging it to a wall outlet

Wait 5 minutes and check that the LED is
static red

1. Open a web browser on the
computer and enter:
http://zyxelsetup
in the address bar
2. Enter password:
1234
3. Click “Login”

1. Enter a new administrator
password to your preference. We
recommend you write this down
in case you need it in the future.
2. Click “Change”

Click “Repeater Mode”

Wait for it to finish scanning

1. Choose a Wi-Fi network you
wish to repeat/extend
2. Click “Continue”

1. Enter the Wi-Fi network’s
password
2. Click “Continue”