100FIT 140T User manual

MOTORIZED TREADMILL
INSTRUCTION MANUAL-140T
WWW.HUNDREDFIT.COM

C O N T E N T S
1- Product Outline
........................................
03
2- Safety Instructions
........................................
06
3- Installation Instructions
........................................
08
4- Operation Instructions
........................................
10
5- Daily Maintenance
........................................
14
6- Warm-up
Demonstration
........................................
17
7- Warranty
........................................
25

2 .Product list
Product list
Treadmill
M
Manual bag
Safety key
Silicone oil
Manual
Screw package

3 . Specification
Specification
Color
silvery
Net weight
60 KG
Running belt
48*125cm
Folding size
161*83*18cm
Peak horsepower
4.5hp
Speed
1-16KM/H
Shock absorption
YES
Max user weight
120kg

Tips:
This product is designed and manufactured with many safety
issues in mind. Please follow the instructions below for just in case
scenarios.We do not bear the consequences of any abnormal
operation.To ensure your safety and avoid accidents, please read
the instruction manual carefully
1- When you start training with this product, please consider your physical condition, train
properly and regularly to ensure that you have enough physical strength to train. Wrong or
excessive training will not help your health.
2- This product is not suitable for children.People suffering from physical discomfort or
mental deficiency and lack of common sense are prohibited. Unless they are supervised or
guided by the person responsible for their safety. Children should be under the supervision
of guardian and make sure that they do not play with equipment.
3- This product is suitable for home use and is not suitable for professional training and
testing, nor for medical purposes.
4- If the power cord is damaged, it must be replaced by the manufacturer or a qualified service
person to avoid danger.
5- Please check all parts before use. And make sure the screws and nuts are tight.
6- When running on a treadmill, wear comfortable tight-fitting clothing to prevent the clothes
from being caught by the machine. Do not let children or pets play around the treadmill to
avoid accidents.
7- Place the treadmill on a smooth, clean, level surface. Make sure there are no sharp objects
nearby. Please do not use it near water and heat sources.
8- Please avoid all moving parts with your hands. Do not place your hands and feet in the gap
below the running belt.
9- Only one person should use treadmill at a time.
10- Make sure the screws and bolts are tight after the treadmill is assembled.

12.After the product is not in use, remove the safety key to prevent mishappening.
13.When in an emergency, quickly pull down the safety switch and step on the left and right side of the
treadmill.
14.Before the treadmill is placed, the side of the left and right handrails needs one meter and a safety
distance of two meters at the back. There is no obstacle in the safe distance.
15.Please use the accessories provided by the original manufacturer, and it is strictly forbidden to change
it privately.
16.The product is an HC grade product with a maximum user weight of 120 KG.
Special Notice:
1.Place the Smart run treadmill in a place where the plug can be can
plugged into the socket.
2.Plug the power cord directly into the socket and do not allow looseness.
3.Please use qualified socket to avoid the danger.
4.If the plug and socket are not compatible, please do not touch the plug and ask the electrician to handle
it.
5.Please use a power supply with a voltage of 220V-240V.
6.Please do not let the power cord and roller contact, do not put the power supply on the running belt,
do not use the damaged plug.
7.Unplug the plug from the socket before cleaning and maintenance.
8.WARNING: if the plug is not pulled out, it may lead to personal injury and equipment damage.
9.Please check each part carefully before use.
10.Please do not use this product outdoors, in high humidity and the sun.
11.Please turn off the machine and remove the plug when you leave.
12.For your safety, the power plug of the machine must be grounded.
13.Smart Run Treadmill needs to be connected with voltage stabilizer to prevent any electrical failure in
the product due to voltage fluctuations.
The Smart Run Treadmill you purchased has already installed the main
structure during the
factory process. It is free of installation and can be used when plugged in.
1- Two person required to lift the treadmill out of the box and placed it on
a level surface. (Make sure there is a 50 cm open space before and after
the treadmill to fold and take the power cord, etc.)
2- Pull up the column in the direction of the arrow until the foot switch
hooks the column.

Treadmill folding instructions
As shown in the figure below, to fold the treadmill, you must
lift the handle up and then press down on
the column and armrest.

Operating instructions in manual normal mode
When you are using a treadmill, you must use a power outlet with a grounding
wire for your safety.
1. Window display:
1. "DIS." window:
Display "P01-P02-...-P12-HP1-HP2-FAT" in the program selection state;
Displays the distance of movement, the forward count is from 0.00-99.0, and
it is cleared to continue running after overflow; the reverse count is
decremented from the set value to zero, when the countdown reaches 0, the
treadmill will slow down and stop running, 5 seconds after a complete stop
Enter the standby state.
2. "STEP" window:
Display the current number of exercise steps.
3. "SPEED" window:
The current speed value is displayed in the running state, and the speed
display range: 1.0-15.0KMH.
4. "TIME/PUL." window:
Display exercise time, manual mode forward timing from 0:00-99:59, when the
timing reaches 99:59, the treadmill will slow down and stop running and the
speed window will display "End", and it will enter the standby state 5 seconds

after a complete stop; distance, Calorie mode forward timing from 0:00-99:59,
timing to 99:59 after clearing to continue to run; countdown will decrement
from the set time to zero, when the countdown to 0:00, the treadmill will slow
down smoothly Stop running, and enter the standby state 5 seconds after it
stops completely.
When the athlete holds the heartbeat sensing handle with both hands, the
system can automatically detect the athlete's heartbeat frequency and display
it in this window. The heartbeat value display range: 50-200 beats/min. (The
data is for reference only and cannot be regarded as medical data.)
5. "CAL." window:
Displays the calorie consumption value of the athlete. When the calorie
consumption value is displayed, the value will be from 0.0-999 in the forward
counting, and will be cleared after overflow to continue running; in the reverse
counting, it will count down from the set value to 0, when it will count down to
0 When the treadmill steadily slows down and stops running, it enters the
standby state 3 seconds after it stops completely.
2. Button function:
1. "PROG" is the program key: in the standby state, press this key to cycle to
select "P01-P02-...-P12-HP1-HP2-FAT".
"P01-P18" are built-in programs.
"HP1-HP2" is the heart rate speed control program.
"FAT" means fat measurement.
2. "MODE" is the mode selection key: press this key to select "0:00", "30:00",
"1.0", "50.0" ("0:00" is manual mode, "30:00" It is the time countdown mode,
"1.0" is the distance countdown mode, and "50.0" is the calorie countdown
mode.) When selecting various modes, you can use the speed and slope plus
and minus keys to set the relevant countdown value. After finishing, press
"START" button to start the treadmill.
3. "START" is the start button: when the power is turned on and the safety lock
is engaged, press this button at any time to start the running of the treadmill.

4. "STOP" is the stop button: this button can be used to stop the running of the
treadmill and reset to zero during exercise.
5. "SPEED+" and "SPEED-" are speed plus and minus keys: in standby state,
used to adjust the set value. It is used to adjust the speed after startup. The
adjustment range value is 0.1 km/time. When it is held for more than 0.5
seconds, it will automatically continue to increase or decrease.
6. "SPEED: 2, 4, 6, 8, 10, 12" KMH is the speed shortcut key: you can quickly
set the speed.
7. Three USB playback control keys: play/pause, volume reduction (long
press)/previous song (short press), volume increase (long press)/next song
(short press)
3. Quick start (manual mode):
1. Turn on the power switch and correctly attach the magnetic safety lock to
the safety lock position under the panel.
2. Press the "START" button, the system enters a 3 second countdown, the
buzzer sounds, and the speed window displays the countdown number. After
the 3 second countdown, the treadmill starts to run at a speed of 1.0 km/h.
3. After starting, you can use the "SPEED+" and "SPEED -" keys to adjust the
speed of the treadmill as needed.
4. Operation during exercise:
1. Press the "SPEED -" key to reduce the running speed of the treadmill.
2. Press the "SPEED+" key to increase the running speed of the treadmill.
3. Press the stop button and the treadmill will slow down to stop running.
4. When the athlete holds the heartbeat hand grip with both hands, the
heartbeat data will be displayed for about 3 seconds.
5. Manual mode:

1. In the standby mode, directly press the "START" button, the treadmill starts
to run at a speed of 1.0 km/h; other windows start counting forward from 0,
press the "SPEED+" and "SPEED -" buttons to change the speed.
2. In the standby state, press the "MODE" key to enter the time countdown
mode, the "TIME" window displays "30:00" and flashes, press the "SPEED+"
and "SPEED -" keys to set the exercise time. The range is: 5:00-9:00.
3. In the time countdown mode, press the "MODE" key to enter the distance
countdown mode, the "DIS" window displays "1.00" and flashes, press the
"SPEED+" and "SPEED -" keys to set the movement distance, distance setting
The fixed range is 0.50-99.9.
4. In the distance countdown mode, press the "MODE" key to enter the calorie
countdown mode, the "CAL" window displays "50.0" and flashes, press the
"SPEED+" and "SPEED -" keys to set calories and calorie settings The range
is: 10.0-999.0.
5. Choose one of the three countdown modes and press the start button after
the setting is completed. The treadmill will start running after a delay of 3
seconds. Press the "SPEED+" and "SPEED -" buttons to adjust the speed and
slope; press the stop button to run The machine stops running.
6, built-in programs:
The system has 12 built-in programs P01-P12. In the standby mode, press the
"PROG" key and the speed window will display "P01-P12". After you select
your favorite program, the "TIME" window flashes at the same time; the preset
time is displayed at 30:00 , Press "SPEED+", "SPEED -" to set the required
exercise time, and then press the "START" button to start the built-in program,
the built-in program is divided into 20 sections, each section of exercise time
= set time / 20. When entering the next section, the system will give three
beeps of “Bi-Bi- Bi-”, and the speed of the system will change with the change
of the program section, during which you can press the “SPEED+” and

“SPEED -” keys to change the speed, but when the program enters the next
section After a period of time, it will be restored to the speed of that period.
After running a program, the system will give out 3 beeps of "B iB i- B i", the
treadmill will slow down and stop running and display "End", and enter 5
seconds after it stops completely. standby mode.
7. Program description:
SPEED stands for speed. Each program divides the exercise time into 20
equal parts, and each time period has a corresponding speed
Time
Select segment
Set time/20 = running time of each segment
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
P01
Walk
slowly
SPEED
3
4
5
5
6
5
5
4
5
5
6
5
5
4
5
5
6
5
5
3
P02
Sprint
SPEED
3
5
6
7
7
6
6
7
7
6
6
7
7
6
6
7
7
6
5
3
P03
Variable
speed
running
SPEED
5
10
6
11
7
12
8
12
9
6
10
7
11
8
12
7
11
9
6
3
P04
Light run
SPEED
5
7
8
9
9
9
8
8
9
9
9
8
8
9
9
9
8
8
6
5
P05
Aerobic
running
SPEED
5
8
10
11
11
10
10
9
9
10
10
11
11
10
10
11
11
8
6
5
P06
Road
running
SPEED
4
6
7
8
9
10
10
9
9
10
10
10
9
9
10
10
10
8
6
3
P07
Beach
run
SPEED
4
7
8
8
9
9
10
8
8
9
9
10
9
8
9
9
8
8
5
3
P08
Mountai
n run
SPEED
4
6
8
9
9
8
8
9
9
9
8
8
8
9
9
9
8
7
5
3
P09
Body
shaping
SPEED
5
7
10
11
12
11
11
10
9
10
11
11
12
11
11
10
10
9
8
4
P10
lose
weight
SPEED
6
8
10
11
12
12
11
9
10
11
12
11
10
11
12
10
12
8
8
4
P11
Fat
burning
SPEED
6
9
11
12
12
12
11
11
10
11
12
12
11
12
12
11
11
10
9
5

8. Heart rate control program:
1. Run at the lowest speed after startup
2. The first 1 minute is a warm-up exercise, you can manually adjust the speed and lift
3. After warming up, calculate the heart rate difference (target heart rate-user's heart rate)
as follows:
A. (Target heart rate-user's heart rate)>0, the speed increases by 0.5KM/H.
B. (Target heart rate-user's heart rate) <0, the speed will be reduced by 0.5KM/H, and will
not drop after reaching the lowest speed.
4. Repeat step 3 every 10 seconds
5. When there is no heart rate for more than 30 seconds, the speed will be reduced by
0.5KMH, and will not drop after reaching the lowest speed; repeat this step every 10
seconds until the lowest speed.
6. When two HRCs are used, the highest speed is 10.0, 12.0KMH
7. Age adjustment range: 15-80, default 30.
8. Target heart rate adjustment and age corresponding data table:
P12
Women'
s
SPEED
3
6
8
8
8
9
9
8
8
8
9
9
8
8
8
9
9
7
5
3

age
Heart rate
age
Heart rate
ag
e
Heart rate
The
smallest
default
The
smalles
t
The
smallest
default
The
smalle
st
The smallest
default
The
smalles
t
15
123
123
195
37
110
110
174
59
97
97
153
16
122
122
194
38
109
109
173
60
96
96
152
17
122
122
193
39
109
109
172
61
95
95
151
18
121
121
192
40
108
108
171
62
95
95
150
19
121
121
191
41
107
107
170
63
94
94
149
20
120
120
190
42
107
107
169
64
94
94
148
21
119
119
189
43
106
106
168
65
93
93
147
22
119
119
188
44
106
106
167
66
92
92
146
23
118
118
187
45
105
105
166
67
92
92
145
24
118
118
186
46
104
104
165
68
91
91
144
25
117
117
185
47
103
103
164
69
91
91
143
26
116
116
184
48
103
103
163
70
90
90
143
27
116
116
183
49
103
103
162
71
89
90
142
28
115
115
182
50
102
102
162
72
89
90
141
29
115
115
181
51
101
101
161
73
88
90
140
30
114
114
181
52
101
101
160
74
88
90
139
31
113
113
180
53
100
100
159
75
87
90
138
32
113
113
179
54
100
100
158
76
86
90
137
33
112
112
178
55
99
99
157
77
86
90
136
34
112
112
177
56
98
98
156
78
85
90
135
35
111
111
176
57
98
98
155
79
85
90
134
36
110
110
175
58
97
97
154
80
84
90
133

9, physical test:
In the standby state, continuously press the "Program" button to enter the
human body mass index (FAT) detection function, press the "Mode" button to
enter the F-1, F-2, F-3, F-4, F-5 interface (F -1--Gender, F-2—Age, F-3—Height,
F-4—Weight, F-5-Physique Test), press the "speed+" and "speed-" keys to
adjust the parameters of 01-04 Set up (parameters as shown in the table below),
and then press the "mode" key to enter the F-5 physical fitness testing interface
after setting. At this time, hold the heart rate board with both hands for 5-6
seconds and then your body mass index will be displayed, and you can check
your weight Is it commensurate with height? Body Mass Index (FAT) is a
measure of the relationship between a person's height and weight, not body
proportions. FAT is suitable for any male and female, and together with other
health indicators, it provides a basis for people to adjust their weight. The ideal
FAT should be between 20-24. If it is less than 19, it means too thin, if it is
between 25 and 29, it is overweight, and if it exceeds 30, it is considered obese.
(The data is for reference only and cannot be regarded as medical data.)
F-1
Seg
01male
02Female
F-2
Age
10------99
F-3
Hight
100----200
F-4
Weight
20-----150
F-5
FAT
≤19
Underweight
FAT
=(20---24)
Normalweight
FAT
=(25---29)
Overweight
FAT
≥30
Obesity
10. The display range of each value:
Setting parameters
initial
Set initial value
Predetermine
d area
Display range
Time
(minutes:seconds)
0:00
30:00
5:00-99:00
0:00－99:59
Speed (KM/H)
0.0
N/A
N/A
1.0-15.0KMH
Distance (km)
0.00
1.00
0.50-99.9
0.00－99.9
Heart rate
(beats/min)
P
N/A
N/A
50-200

Calories (kcal)
0.0
50.0
10.0-999.0
0.0－999.0
Step count
0
N/A
N/A
0-99999
11. Safety lock function:
In any state, pull down the safety lock to stop the running of
the treadmill. The treadmill will stop in an emergency, the
speed window will display “―――”, and the buzzer will
sound “BB” alarm 3 times; No other operations can be
performed except power off. After the safety lock is correctly
installed, the treadmill enters the standby state again and
waits for input instructions.
12. Power saving mode:
This system has a power-saving function. If there is no key
command input within 10 minutes in the standby state, the
system enters the power-saving mode, automatically turns
off the display, and presses any key to wake up the system
again.
13. MP3 function:
When connected to MP3 or other audio equipment after
power on, the electronic watch can play music. The size of
the sound is controlled on the audio device. Please pay
attention to control the size of the sound so as not to affect
the quality of the sound and the built-in audio circuit.
14. Shut down:
At any time, you can turn off the treadmill by turning off the
power switch, so that it will not damage the treadmill.
15. Matters needing attention:
1. Check whether the power supply is loaded before
exercise; check whether the safety lock is effective.
2. If there is an abnormal situation during the exercise, the
safety lock can be pulled off, and the treadmill will quickly
decelerate to a stop; then put in the safety lock, reset the
equipment, and wait for input instructions.

3. If there is any problem with this machine, please contact
the dealer, non-professionals, please do not try to
disassemble or repair it to avoid damage to the equipment.
16. Simple troubleshooting methods for electric running:
Malfunction or phenomenon
Possible reason
Processing method
No display on treadmill
A.No power plugged in, or no power
Connect the power cord to AC, or check
the AC outlet
B.The power switch is not turned on
Place the power switch in the ON position
C.The drive is not powered or damaged
Press the overload protector again, or
replace the drive
D.Electronic watch signal line is open
Replace the signal line and reconnect it
E.Electronic watch is damaged
Replace electronic watch
F.(LCD) The backlight is not bright
Need to repair, check the backlight cable,
or replace the backlight
The treadmill display is
incomplete, missing strokes
A.Display driver IC welding or continuous
welding
Need to be repaired, check the solder
joints, and re-solder in place
B.(Liquid crystal) The conductive strip
slides and is not fixed in place
Reassemble the LCD
C.Defective display driver IC
Need to repair, solder new display driver
IC
The treadmill does not move
smoothly, weak or jittery
A.There is resistance in the transmission
part
Adjust the transmission part, or add
lubricating oil
B.Transmission belt is too tight or too
loose
Adjust the tightness of the transmission
belt
C.Drive torque is too small or too large
Adjust the torque potentiometer to the
proper position
El
ec
tr
on
ic
m
et
er
di
sp
la
y
---Or----(Or display
E00/E07 according to
customer requirements)
A.Safety lock falls off
Put the safety lock on the panel or insert
the card position
B.Magnetron is not closed
Magnetron installed in the correct position
E01-Communication
failure (the drive did not
receive the electronic
meter signal);E13-
Communication failure
(the electronic meter did
not receive the drive
signal)
A.The signal wire of the electronic watch
is not connected well or the contact is poor
Reconnect
B.The signal wire of the electronic meter
is damaged and has a short circuit or an
open circuit
Replace the signal line
C.Electronic meter signal circuit failure
Replace electronic watch
D.Drive signal line failure
Replace the drive
E02- stall protection
(explosion-proof shock
protection or abnormal
main motor)
A.The machine wire is not connected well,
or the motor is open
Reconnect the motor cable, or replace the
motor
B.Driver IGBT breakdown damage
Replace the drive
C.The external AC voltage is too low
Stop using, ask an electrician to
troubleshoot
E03-No speed sensor
signal (with speed sensor
driver)
A.The speed signal line is not connected
well, or the sensor is damaged
Reconnect the speed signal cable or
replace the sensor
B.Driver sensing circuit is bad
Replace the drive
E04-lifting self-test
learning failure (with lift
drive)
A.The lifting motor wire or signal wire is
not connected properly
Check if the connection is wrong, replug
the connection
B.Defective lifting motor
Replace the lifting motor

C.Bad drive
Replace the drive
E05-overcurrent
protection
A.Overloaded
System protection, restart after manual
blocking
B.The transmission part is stuck or
blocked
Adjust the transmission part, or add
lubricating oil
C.Short circuit inside the motor
Replace the motor
D.Drive burned out
Replace the drive
E06- usually the motor is
open
A.The motor wire is not connected
properly
Reconnect the motor cable
B.Open circuit inside the motor
Replace the motor
C.Motor idling
If the current is too small, an error will be
reported, please install and test
E08-Storage 24C02 error
(with 24C02 drive)
A.The storage IC is not inserted in place
(non-switching power supply)
Re-insert it on the IC socket, pay attention
to the position of PIN1
B.The storage IC is damaged, or the
related wiring is bad
eplace the storage IC, or replace the drive
E09-Inverted error (with
inverted drive)
A.The treadmill is upright or not placed
horizontally
Adjust the treadmill and place it
horizontally
B.Bad drive upside down circuit
Replace the drive
E10-Usually it is
abnormal peak current of
the motor, overcurrent
protection
A.Drive torque is too large
Adjust the torque potentiometer to the
proper position
B.Short circuit inside the motor
Replace the motor
C.The transmission part is stuck
Adjust the transmission part, or add
lubricating oil
E11-External AC voltage
overvoltage (according to
customer requirements)
AC overvoltage: higher than 270VAC in
220V system; higher than 150VAC in
110V system
Stop using, ask an electrician to
troubleshoot
E14-External AC voltage
undervoltage (according
to customer
requirements)
AC undervoltage: less than 160VAC for
220V system; less than 70VAC for 110V
system
Stop using, ask an electrician to
troubleshoot
Treadmill moving instructions
1. Treadmill movement: As shown in the figure, use
the hands to lift the tail of the treadmill properly to
move back and forth.(only suitable for short distance
movement in the room)
2. .Turn on the power, turn on the switch to turn on the
walker and enjoy the exercise.