2N
®IP Video Kit is equipped with one relay output and two active 12 V outputs. Use
the numerical keypad or, during the call, any telephone to control these outputs. A
wide range of output mode settings help you make use of a high number of
applications. Device is also equipped with two galvanically isolated digital inputs and
three status signalling outputs.
2N
®IP Video Kit is very easy to install. All you have to do is connect it to your LAN
using the LAN cable. An integrated two-port LAN switch simplifies installation on sites
with a limited LAN infrastructure. Supply the intercom either from a 9–36 V source or
directly from your POE supporting LAN.
Use a PC web browser to configure your . Apply the 2N
®IP Video Kit 2N Access
®
to administer extensive intercom installations easily and quickly.Commander
Advantages of Use
Industrial design and variable mounting options
Wide supply power range + PoE supply
Two analog cameras connection
Integrated 10 W power amplifier
External amplifier/microphone/audio signal source connection
Galvanically isolated relay output
Two controlled active 12 V outputs
Two galvanically isolated logic inputs
Up to 3 signalling LED outputs
Up to 16 external buttons/matrix keypad connection
Integrated two-port LAN switch
Bidirectional communication – acoustic echo cancelling
Configuration via web interface/special PC application
SIP 2.0 support
Video codecs (H.263, H.263+, H.264, MPEG-4, MJPEG)
Audio codecs (G.711, G.729, G.722, L16/16 kHz)
HTTP(S) server for configuration
SNTP client for server time synchronisation
RTSP server for audio streaming
TFTP client for automatic configuration and firmware update