3B Medical LUNA G3 User manual

Patient Instructions
CONNECTING YOUR LUNA G3 WITH WI-FI MODULE
1. Before beginning setup, please make sure you know the NAME and PASSWORD of
the network you are attempting to connect to
2. Make sure your device is plugged in and powered on.
3. Hit the home button on the face of the device, bringing up the main menu.
4. Use the selector wheel to scroll clockwise until you illuminate the settings icon on
the right hand side of the main menu.
5. Press the selector wheel to select the settings option.
6. Once in the setting option scroll down to the Wi-Fi settings by turning the selector
wheel counter-clockwise until you see an icon labeled Wi-Fi.
7. Press the selector wheel once the Wi-Fi icon is illuminated.
8. If the device is currently not connected to a network, press the selector wheel
and scroll clockwise until you encounter the name of the network you are trying
to connect to. You will need to know the name of the network you are trying to
connect to in order to connect this device.’

9. Type in your network passcode by using the connector wheel to scroll in between
letters and numbers. Once nished scroll to the enter option at the bottom right of
the keyboard using the selector wheel. If you do not know the password, please
obtain the password. You will not be able to connect without the password of
your Wi-Fi network.
10.A prompt will show on the screen that your device is currently trying to connect to
your selected Network. It will then show a connected conrmation or a connection
failed alert.
11. If you have a failed attempt please re-enter your password using the above
instructions. Letters are case sensitive, and please make sure numbers or symbols
are entered correctly.
12. After connecting to the network you have selected you can hit the home button
twice to bring yourself back to the main menu where you can see the top left-
hand corner the universal sign for Wi-Fi which means that your device is
connected to your network.
Universal symbol for Wi-Fi
3B 4521 11.21