3B Medical LUNA II User manual

Luna GII Quick Operation Manual V1.0
1 / 2
Luna GIIQuick Operation Manual
1. Button Functions
Mute Button: Press it to mute alarms
Knob: Start treatment and adjust device settings
Ramp Button: Press it to enable the Ramp feature
2. Setting up the Device
C
Tube
B
Filter Cap (Air Inlet)
Air Outlet
Device
Power Cord
Power Outlet DC Inlet
Power Adapter
A
D
Mask
E
A. Connect one end of the tube to the assembled mask.
B. Connect the other end of the tube securely to the air outlet of the device, as shown in the figure
above.
C. Connect the power adapter to the DC inlet of the device.
D. Connect the power cord to the power adapter.
E. Plug the power cord into the power outlet.
3. Adjusting Device Settings
A. After the device is connected to power, its screen displays the Main Interface shown in the figure
below.
B. From the Main Interface shown above, press and hold the Ramp Button for three
seconds. The screen displays the Initial Setup Interface, as shown in the figure below.
C. Press the Knob to access the Setup Interface, as shown in the figure below.
All manuals and user guides at all-guides.com
all-guides.com

Luna GII Quick Operation Manual V1.0
2 / 2
D. Press and turn the Knob to adjust an option.
E. Press the Knob to confirm your adjustment to the option.
F. The cursor switches among the options as you turn the Knob . Refer to steps C-E to adjust
other options. When the cursor is on the Home option, as shown in the figure below, press the
Knob to exit the Setup Interface.
4. Starting Treatment
After you finish adjusting device settings and return to the Main Interface, press the Knob to
start treatment.
All manuals and user guides at all-guides.com