Assembly
2. 3.
8.7. 9.
10. 11.
4. 6.
5.
Insert the front of the central rail into the
grooves in the front of the rocking trolley.
Then push the rail down until you hear a click.
Pull the seat fabric over the toy bar opening
and snap into place.
Pull the bottom of the seat fabric
down and snap into place.
Place toy balls into the toy ball ring. Install the toy bar by inserting the bar
to the side and turning 90 degrees
so it is facing forward.
Turn on rockaRoo
by pressing the
power button.
Select rocking speed
by turning the knob.
Once assembled, plug into power supply.
Pull child restraint harness through back of
the seat fabric.
Lock the lever on the back
of the rocking trolley.
Insert seat ring into the center support rail until you
hear it click at both the top and bottom.
1.
rockaRoo™
90°
