A.O. Smith AO-US-200 User manual

1 2
3

AO-US-200
Replacement cartridge AO-US-200-R
Rated service flow .5gpm (1.89 lpm)
Max capacity 500 gal (1892 liters)
Min working pressure 20 psi (137 kPa)
Max working pressure 80 psi (551 kPa)
Min operating temperature 40° F (4.44° C)
Max operating temperature 90° F (32.22° C)

Performance Data Sheet for the A. O. Smith Under Counter Water Filter
Models Replacement Operating pressure range Rated capacity Operating temp. range Rated flow
AO-US-200 AO-US-200-R 20-80 psi
1.40-5.624 kg/cm2
500 gallons
1892 Liters 40-90° F 4.44-32.2° C .05 gpm 1.89 lpm
Manufactured by: A. O. Smith Corporation 11270 West Park Place | Milwaukee, WI 53224 | 877.333.7108
Organic chemicals included by surrogate testing
VOCs
(by surrogate testing
using chloroform)
Drinking
water
regulatory
level (MCL/
MAC) mg/L
Influent/
Unfiltered
Effluent/
Filtered
Percent
Reduction
alachlor 0.002 0.050 0.001 >98%
atrazine 0.003 0.100 0.003 >97%
benzene 0.005 0.081 0.001 >99%
carbofuran 0.04 0.190 0.001 >99%
carbon tetrachloride 0.005 0.078 0.0018 98%
chlorobenzene 0.1 0.077 0.001 >99%
chloropicrin —0.015 0.0002 99%
2,4-D 0.07 0.110 0.0017 98%
dibromochloropropane (DBCP) 0.0002 0.052 0.00002 >99%
o-dichlorobenzene 0.6 0.080 0.001 >99%
p-dichlorobenzene 0.075 0.040 0.001 >98%
1,2-dichloroethane 0.005 0.088 0.0048 95%
1,1-dichloroethylene 0.007 0.083 0.001 >99%
cis-1,2-dichloroethylene 0.07 0.170 0.0005 >99%
trans-1,2-dichloroethylene 0.1 0.086 0.001 >99%
1,2-dichloropropane 0.005 0.080 0.001 >99%
cis-1,3-dichloropropylene — 0.079 0.001 >99%
dinoseb 0.007 0.170 0.0002 99%
endrin 0.002 0.053 0.00059 99%
ethylbenzene 0.7 0.088 0.001 >99%
ethylene dibromide (EDB) 0.00005 0.044 0.00002 >99%
haloacetonitriles (HAN)
bromochloroacetontrile —0.022 0.0005 98%
dibromoacetontrile —0.024 0.0006 98%
dichloroacetontrile —0.0096 0.0002 98%
trichloroacetontrile —0.015 0.0003 98%
haloketones (HK)
1,1-dichloro-2-propanone —0.0072 0.0001 99%
1,1,1-trichloro-2-propanone —0.0082 0.0003 96%
heptachlor (H-34, Heptox) 0.0004 0.025 0.00001 >99%
heptachlor epoxide 0.0002 0.0107 0.0002 98%
hexachlorobutadiene —0.044 0.001 >98%
hexachlorocyclopentadiene 0.05 0.060 0.000002 >99%
lindane 0.0002 0.055 0.00001 >99%
methoxychlor 0.04 0.050 0.0001 >99%
pentachlorophenol 0.001 0.096 0.001 >99%
simazine 0.004 0.120 0.004 >97%
styrene 0.1 0.150 0.0005 >99%
1,1,2,2-tetrachloroethane —0.081 0.001 >99%
tetrachloroethylene 0.005 0.081 0.001 >99%
toluene 10.078 0.001 >99%
2,4,5-TP (silvex) 0.05 0.270 0.0016 99%
tribromoacetic acid —0.042 0.001 >98%
1,2,4-trichlorobenzene 0.07 0.160 0.0005 >99%
1,1,1-trichloroethane 0.2 0.084 0.0046 95%
1,1,2-trichloroethane 0.005 0.150 0.0005 >99%
trichloroethylene 0.005 0.180 0.0010 >99%
trihalomethanes (THMs) Influent/
Unfiltered Effluent/ Filtered Percent Reduction
bromodichloromethane (THM)
0.080 0.300 0.015 95%
bromoform (THM)
chloroform (THM)
chlorodibromomethane (THM)
xylenes (total) 10 0.070 0.001 >99%
NSF/ANSI 42 Min Reduction Overall % Reduction Results
Chlorine Reduction, Free Available <0.5 mg/l 96.06% Pass
Chloramine Reduction, Free Available <0.5 mg/l 96.06% Pass
Particulate Reduction 85% 99.9% Pass
NSF/ANSI 53 Min Reduction Overall % Reduction Results
Cyst Live Cryptosporidium & Giardia 99.95% >99.95% Pass
Mercury Reduction pH 8.5 <2 ug/L >96.7% Pass
Mercury Reduction pH 6.5 <2 ug/L >96.6% Pass
Lead Reduction pH 6.5 <10 ug/L >99.4% Pass
Lead Reduction pH 8.5 <10 ug/L >99.3% Pass
MTBE Reduction <5 ug/L 86.6% Pass
Turbidity <0.5 NTU 99.1% Pass
VOC Surrogate Test 95% 99.4% Pass
Asbestos 99% >99% Pass
NSF/ANSI 401 Maximum
Concentration Minimum Reduction Overall % Reduction Results
Atenolol 30 ng/L 94.2% 94.2% Pass
Bisphenol A 300 ng/L 98.80% 98.9% Pass
Carbamazepine 200 ng/L 98.6% 98.6% Pass
DEET 200 ng/L 98.7% 98.7% Pass
Estrone 20 ng/L 96.30% 96.5% Pass
Ibuprofen 60 ng/L 95.3% 95.4% Pass
Linuron 20 ng/L 96.6% 96.6% Pass
Meprobamate 60 ng/L 94.7% 94.7% Pass
Metolachlor 200 ng/L 98.6% 98.6% Pass
Naproxen 20 ng/L 96.3% 96.4% Pass
Nonyl phenol 200 ng/L 97.50% 97.5% Pass
Phenytoin 30 ng/L 95.50% 95.6% Pass
TCEP 700 ng/L 98% 98% Pass
TCPP 700 ng/L 97.8% 97.8% Pass
Trimethoprim 20 ng/L 96.7% 96.7% Pass
NSF P473 Influent challenge
concentration
Maximum
permissible
concentration
Overall % reduction Results
Perfluorooctanoic
acid (PFOA) &
Perfluorooctane
sulfonate (PFOS)
1.5 ±10% ug/L 0.07 ug/L 95.8% Pass

1 2

6
7
1 2
3

123
AO-US-200
Cartucho de repuesto AO-US-200-R
Flujo nominal del servicio 1.9 L/m (0.5 gpm)
Capacidad máxima de 1.893 litros (500 galones)
Presión mín. de funcionamiento 1.40 kg/cm2(20 psi)
Presión máx. de funcionamiento 5.62 kg/cm2(80 psi)
Temperatura mín. de funcionamiento 4.44 °C (40 °F)
Temperatura máx. de funcionamiento 32.22 °C (90 °F)

5
Hoja de datos de rendimiento del filtro de agua para debajo del mostrador de A. O. Smith
Modelos Repuesto Rango de presión de
funcionamiento Capacidad nominal Rango de temp. de funcionamiento Flujo nominal
AO-US-200 AO-US-200-R 1.40 a 5.624 kg/cm2
20 a 80 psi
1.893 litros
(500 galones)
4.44 a 32.2 °C
40 a 90 °F
1.9 L/m
(0.5 gpm)
Fabricado por: A. O. Smith Corporation 11270 West Park Place | Milwaukee, WI 53224 | 877.333.7108
Productos químicos orgánicos incluidos por la prueba de sustitutos
COV (según la prueba de
sustitutos con el uso de
cloroformo)
Nivel normativo
de agua potable
(NMC/CMA)
mg/L
Entrante/
Sin filtrar
Saliente/
Filtrada
Porcentaje
de
reducción
alachlor 0.002 0.050 0.001 >98 %
atrazine 0.003 0.100 0.003 >97 %
benzene 0.005 0.081 0.001 >99 %
carbofuran 0.04 0.190 0.001 >99 %
carbon tetrachloride 0.005 0.078 0.0018 98 %
chlorobenzene 0.1 0.077 0.001 >99 %
chloropicrin —0.015 0.0002 99 %
2,4-D 0.07 0.110 0.0017 98 %
dibromochloropropane (DBCP) 0.0002 0.052 0.00002 >99 %
o-dichlorobenzene 0.6 0.080 0.001 >99 %
p-dichlorobenzene 0.075 0.040 0.001 >98 %
1,2-dichloroethane 0.005 0.088 0.0048 95 %
1,1-dichloroethylene 0.007 0.083 0.001 >99 %
cis-1,2-dichloroethylene 0.07 0.170 0.0005 >99 %
trans-1,2-dichloroethylene 0.1 0.086 0.001 >99 %
1,2-dichloropropane 0.005 0.080 0.001 >99 %
cis-1,3-dichloropropylene — 0.079 0.001 >99 %
dinoseb 0.007 0.170 0.0002 99 %
endrin 0.002 0.053 0.00059 99 %
ethylbenzene 0.7 0.088 0.001 >99 %
ethylene dibromide (EDB) 0.00005 0.044 0.00002 >99 %
haloacetonitrilos (HAN)
bromochloroacetontrile —0.022 0.0005 98 %
dibromoacetontrile —0.024 0.0006 98 %
dichloroacetontrile —0.0096 0.0002 98 %
trichloroacetontrile —0.015 0.0003 98 %
haloketones (HK)
1,1-dichloro-2-propanone —0.0072 0.0001 99 %
1,1,1-trichloro-2-propanone —0.0082 0.0003 96 %
heptachlor (H-34, Heptox) 0.0004 0.025 0.00001 >99 %
heptachlor epoxide 0.0002 0.0107 0.0002 98 %
hexachlorobutadiene —0.044 0.001 >98 %
hexachlorocyclopentadiene 0.05 0.060 0.000002 >99 %
lindane 0.0002 0.055 0.00001 >99 %
methoxychlor 0.04 0.050 0.0001 >99 %
pentachlorophenol 0.001 0.096 0.001 >99 %
simazine 0.004 0.120 0.004 >97 %
styrene 0.1 0.150 0.0005 >99 %
1,1,2,2-tetrachloroethane —0.081 0.001 >99 %
tetrachloroethylene 0.005 0.081 0.001 >99 %
toluene 10.078 0.001 >99 %
2,4,5-TP (silvex) 0.05 0.270 0.0016 99 %
tribromoacetic acid —0.042 0.001 >98 %
1,2,4-trichlorobenzene 0.07 0.160 0.0005 >99 %
1,1,1-trichloroethane 0.2 0.084 0.0046 95 %
1,1,2-trichloroethane 0.005 0.150 0.0005 >99 %
trichloroethylene 0.005 0.180 0.0010 >99 %
trihalomethanes (THMs) Entrante/
Sin filtrar
Saliente/
Filtrada
Porcentaje
de reducción
bromodichloromethane (THM)
0.080 0.300 0.015 95 %
bromoform (THM)
chloroform (THM)
chlorodibromomethane (THM)
xylenes (total) 10 0.070 0.001 >99 %
NSF/ANSI 42 Reducción mínima Porcentaje total
de reducción Resultados
Chlorine Reduction, Free Available <0.5 mg/l 96.06 % Aprobado
Chloramine Reduction, Free Available <0.5 mg/l 96.06 % Aprobado
Particulate Reduction 85 % 99.9 % Aprobado
NSF/ANSI 53 Reducción mínima Porcentaje total
de reducción Resultados
Cyst Live Cryptosporidium & Giardia 99.95 % >99.95 % Aprobado
Mercury Reduction pH 8.5 <2 ug/L >96.7 % Aprobado
Mercury Reduction pH 6.5 <2 ug/L >96.6 % Aprobado
Lead Reduction pH 6.5 <10 ug/L >99.4 % Aprobado
Lead Reduction pH 8.5 <10 ug/L >99.3 % Aprobado
MTBE Reduction <5 ug/L 86.6 % Aprobado
Turbidity <0.5 NTU 99.1 % Aprobado
VOC Surrogate Test 95 % 99.4 % Aprobado
Asbestos 99 % >99 % Aprobado
NSF/ANSI 401 Concentración
máxima Reducción mínima Porcentaje total de reducción Resultados
Atenolol 30 ng/L 94.2 % 94.2 % Aprobado
Bisphenol A 300 ng/L 98.80 % 98.9 % Aprobado
Carbamazepine 200 ng/L 98.6 % 98.6 % Aprobado
DEET 200 ng/L 98.7 % 98.7 % Aprobado
Estrone 20 ng/L 96.30 % 96.5 % Aprobado
Ibuprofen 60 ng/L 95.3 % 95.4 % Aprobado
Linuron 20 ng/L 96.6 % 96.6 % Aprobado
Meprobamate 60 ng/L 94.7 % 94.7 % Aprobado
Metolachlor 200 ng/L 98.6 % 98.6 % Aprobado
Naproxen 20 ng/L 96.3 % 96.4 % Aprobado
Nonyl phenol 200 ng/L 97.50 % 97.5 % Aprobado
Phenytoin 30 ng/L 95.50 % 95.6 % Aprobado
TCEP 700 ng/L 98 % 98 % Aprobado
TCPP 700 ng/L 97.8 % 97.8 % Aprobado
Trimethoprim 20 ng/L 96.7 % 96.7 % Aprobado
NSF P473 Concentración de
riesgo de ingreso
Concentración
máxima permitida
Porcentaje total
de reducción Resultados
Perfluorooctanoic
acid (PFOA) &
Perfluorooctane
sulfonate (PFOS)
1.5 ±10 % ug/L 0.07 ug/L 95.8 % Aprobado

5
Productos químicos orgánicos incluidos por la prueba de sustitutos
COV (según la prueba de
sustitutos con el uso de
cloroformo)
Nivel normativo
de agua potable
(NMC/CMA)
mg/L
Entrante/
Sin filtrar
Saliente/
Filtrada
Porcentaje
de
reducción
alachlor 0.002 0.050 0.001 >98 %
atrazine 0.003 0.100 0.003 >97 %
benzene 0.005 0.081 0.001 >99 %
carbofuran 0.04 0.190 0.001 >99 %
carbon tetrachloride 0.005 0.078 0.0018 98 %
chlorobenzene 0.1 0.077 0.001 >99 %
chloropicrin —0.015 0.0002 99 %
2,4-D 0.07 0.110 0.0017 98 %
dibromochloropropane (DBCP) 0.0002 0.052 0.00002 >99 %
o-dichlorobenzene 0.6 0.080 0.001 >99 %
p-dichlorobenzene 0.075 0.040 0.001 >98 %
1,2-dichloroethane 0.005 0.088 0.0048 95 %
1,1-dichloroethylene 0.007 0.083 0.001 >99 %
cis-1,2-dichloroethylene 0.07 0.170 0.0005 >99 %
trans-1,2-dichloroethylene 0.1 0.086 0.001 >99 %
1,2-dichloropropane 0.005 0.080 0.001 >99 %
cis-1,3-dichloropropylene — 0.079 0.001 >99 %
dinoseb 0.007 0.170 0.0002 99 %
endrin 0.002 0.053 0.00059 99 %
ethylbenzene 0.7 0.088 0.001 >99 %
ethylene dibromide (EDB) 0.00005 0.044 0.00002 >99 %
haloacetonitrilos (HAN)
bromochloroacetontrile —0.022 0.0005 98 %
dibromoacetontrile —0.024 0.0006 98 %
dichloroacetontrile —0.0096 0.0002 98 %
trichloroacetontrile —0.015 0.0003 98 %
haloketones (HK)
1,1-dichloro-2-propanone —0.0072 0.0001 99 %
1,1,1-trichloro-2-propanone —0.0082 0.0003 96 %
heptachlor (H-34, Heptox) 0.0004 0.025 0.00001 >99 %
heptachlor epoxide 0.0002 0.0107 0.0002 98 %
hexachlorobutadiene —0.044 0.001 >98 %
hexachlorocyclopentadiene 0.05 0.060 0.000002 >99 %
lindane 0.0002 0.055 0.00001 >99 %
methoxychlor 0.04 0.050 0.0001 >99 %
pentachlorophenol 0.001 0.096 0.001 >99 %
simazine 0.004 0.120 0.004 >97 %
styrene 0.1 0.150 0.0005 >99 %
1,1,2,2-tetrachloroethane —0.081 0.001 >99 %
tetrachloroethylene 0.005 0.081 0.001 >99 %
toluene 10.078 0.001 >99 %
2,4,5-TP (silvex) 0.05 0.270 0.0016 99 %
tribromoacetic acid —0.042 0.001 >98 %
1,2,4-trichlorobenzene 0.07 0.160 0.0005 >99 %
1,1,1-trichloroethane 0.2 0.084 0.0046 95 %
1,1,2-trichloroethane 0.005 0.150 0.0005 >99 %
trichloroethylene 0.005 0.180 0.0010 >99 %
trihalomethanes (THMs) Entrante/
Sin filtrar
Saliente/
Filtrada
Porcentaje
de reducción
bromodichloromethane (THM)
0.080 0.300 0.015 95 %
bromoform (THM)
chloroform (THM)
chlorodibromomethane (THM)
xylenes (total) 10 0.070 0.001 >99 %