Aaeon AEV-6356 User manual

Last Updated: November 4, 2015
AEV-6356
Railway Embedded Box PC
User’s Manual 2nd Ed

Preface II
Railway Embedded Box PC AEV-6356
Copyright Notice
This document is copyrighted, 2015. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
Railway Embedded Box PC AEV-6356
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
Microsoft Windows®is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.

Preface IV
Railway Embedded Box PC AEV-6356
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
AEV-6356
1
Wallmount brackets
2
M12 power DC jack kit
1
M12 USB Y cable
2
M12 COM cable
1
M12 LAN cable
2
Product DVD with User’s Manual (in pdf) and drivers
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
Railway Embedded Box PC AEV-6356
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver
installation instructions (if any), to facilitate users in setting up their product.
Users may refer to the AAEON.com for the latest version of this document.

Preface VI
Railway Embedded Box PC AEV-6356
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure
to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and contain all electronic components
in any static-shielded containers.

Preface VII
Railway Embedded Box PC AEV-6356
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WHERE
THE STORAGE TEMPERATURE IS BELOW -45° C (-49°F) OR ABOVE 85°C (185°F)
TO PREVENT DAMAGE.

Preface VIII
Railway Embedded Box PC AEV-6356
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept
any interference received including interference that may
cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions and your local government’s
recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le
constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et
les directives gouvernementales de recyclage.

Preface IX
Railway Embedded Box PC AEV-6356
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Embedded Box PC/ Industrial System
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
×
○
○
○
○
○
外部信号
连接器及线材
×
○
○
○
○
○
外壳
×
○
○
○
○
○
中央处理器
与内存
×
○
○
○
○
○
硬盘
×
○
○
○
○
○
电源
×
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、电源为选购品。

Preface X
Railway Embedded Box PC AEV-6356
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Embedded Box PC/ Industrial System
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
×
○
○
○
○
○
Wires &
Connectors
for External
Connections
×
○
○
○
○
○
Chassis
×
○
○
○
○
○
CPU & RAM
×
○
○
○
○
○
Hard Disk
×
○
○
○
○
○
PSU
×
○
○
○
○
○
O：The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only

Preface XI
Railway Embedded Box PC AEV-6356
Table of Contents
Chapter 1 - Product Specifications........................................................................................1
1.1 Specifications............................................................................................................ 2
Chapter 2 –Hardware Information .......................................................................................4
2.1 Dimensions............................................................................................................... 5
2.2 Jumpers and Connectors ...................................................................................... 6
2.3 List of Jumpers......................................................................................................... 8
2.3.1 COM4 RS232/422/485 (JP1) .............................................................. 9
2.3.2 Clear CMOS (JP4) ................................................................................. 9
2.3.3 COM3 12V/5V/RI (JP5)........................................................................ 9
2.3.4 COM2 12V/5V/RI (JP6)...................................................................... 10
2.3.5 COM1 RS232/422/485 (JP7) ............................................................ 10
2.3List of Connectors ................................................................................................. 11
2.4 RS-232/422/485 Serial Port Connector............................................................ 12
2.5 USB Connector (M12) .......................................................................................... 13
2.6 LAN Connector (M12).......................................................................................... 13
2.7 Isolated DI/O.......................................................................................................... 14
Chapter 3 - AMI BIOS Setup................................................................................................16
3.1 System Test and Initialization .............................................................................. 17
3.2 AMI BIOS Setup..................................................................................................... 18
3.3 Setup Submenu: Main.......................................................................................... 19
3.4 Setup Submenu: Advanced ................................................................................ 20
3.4.1Advanced: ACPI Settings................................................................... 21
3.4.2 Advanced: CPU Configuration......................................................... 22
3.4.3 Advanced: IDE Configuration (IDE)................................................. 23
3.4.3.1 Advanced: IDE Configuration (AHCI) ................................. 24
3.4.3.2 Advanced: IDE Configuration (RAID).................................. 25

Preface XII
Railway Embedded Box PC AEV-6356
3.4.4 Advanced: Intel TXT (LT) Configuration......................................... 26
3.4.5 Advanced: PCH-FW Configuration................................................. 27
3.4.6 Advanced: Firmware Update Configuration ................................. 28
3.4.7 Advanced: Super IO Configuration ................................................ 29
3.4.7.1 Super IO Configuration: Serial Port 1 Configuration ...... 30
3.4.7.2 Super IO Configuration: Serial Port 2 Configuration ...... 31
3.4.7.3 Super IO Configuration: Serial Port 3 Configuration ...... 32
3.4.7.4 Super IO Configuration: Serial Port 4 Configuration ...... 33
3.4.8 Advanced: F81866 H/W Monitor.................................................... 34
3.4.9 Advanced: Digital I/O ........................................................................ 35
3.5 Setup submenu: Chipset...................................................................................... 36
3.5.1 Chipset: PCH-IO Configuration ....................................................... 37
3.6 Setup submenu: Boot........................................................................................... 39
3.6.1 Boot: BBS Priorities............................................................................. 40
3.7 Setup submenu: Security..................................................................................... 41
3.8 Setup submenu: Exit............................................................................................. 42
Chapter 4 –Drivers Installation ...........................................................................................43
4.1 Product CD/DVD................................................................................................... 44
Appendix A - Watchdog Timer Programming...................................................................46
A.1 Watchdog Timer Initial Program........................................................................ 47
A.2 Watchdog Sample Program ............................................................................... 48
Appendix B - I/O Information..............................................................................................52
B.1 I/O Address Map................................................................................................... 53
B.2 Memory Address Map......................................................................................... 55
B.3 IRQ Mapping Chart .............................................................................................. 56
B.4 DMA Channel Assignment.................................................................................. 59
Appendix C –RAID & AHCI Settings ..................................................................................60
C.1 Setting RAID ........................................................................................................... 61

Preface XIII
Railway Embedded Box PC AEV-6356
C.2 Setting AHCI........................................................................................................... 71
Appendix D –Electrical Specifications for I/O Ports..........................................................77
D.1 DI/O Programming............................................................................................... 78
D.2 DI/O Register ......................................................................................................... 79
D.3 Digital I/O Sample Program................................................................................ 80

Railway Embedded Box PC AEV-6356
Chapter 1
Chapter 1 - Product Specifications

Chapter 1 –Product Specifications 2
Railway Embedded Box PC AEV-6356
1.1 Specifications
System
Processor
Intel®Core™ i7-3517UE up to 2.8GHz
Intel®Celeron®827E ,1.4 GHz
System Memory
DDR3 SODIMM x 1, up to 8 GB
Chipset
Intel® QM77
Display
Interface
VGA
DB-15 x 1 for VGA
DVI
DVI-I x 1
Storage
Device
SSD
Type 2 CFast™ x 1
HDD
SATA 3.0 Gb/s HDD bay x 2 (support RAID 0, 1)
Network
LAN
Gigabit Ethernet x 2
Wireless
Optional by Mini Card
Front I/O
USB Host
USB 2.0 x 2 (M12)
LAN
Giga LAN x 2 (M12)
Serial Port
RS-232/422/485 x 1 (M12)
Others
VGA x 1 (DB-15)
DVI-I x 1
CFast™slot x 1
SIM slot x 1
Power button
Rear I/O
USB Host
USB 3.0 x 2 (Type A)
Serial Port
RS-232 x 2 (DB-9)
RS-232/422/485 x 1 (DB-9, isolated)
Others
Digital input x 6
Digital output x 2
Power input (17 ~ 30 VDC certificated, 17 ~

Chapter 1 –Product Specifications 3
Railway Embedded Box PC AEV-6356
75V-compliant) (M12)
Expansion
PCIe
Full-size Mini PCIe x 1
Half-size Mini PCIe x 1 (WiFi/ 3G/ GPS)
(Optional)
Indicator
Front
System LED x 1 (powerbutton)
Power Requirement
12 V DC-in with lockable connector
ATX mode (optional AT by jumper/ BIOS
setting)
System Cooling
Passive cooling
Mounting
Wall-mount
Dimension (W x H x D)
286 x 92 x 164.2 mm (11.26 x 3.62 x 6.47”)
Gross Weight
7 kg (15.4 lb)
Certification
EMC
Compliant with EN50121-3-2, EN55022 and
EN55024
Environmental
Operating Temperature
-40 ~ 70°C, 85°C for 10 minutes (-40 ~ 158°F,
185°F for 10 minutes)
EN 50155: 2007, Clause 12.2.4
EN 60068-2-2: 2007, test Bd.
Storage Temperature
-45 ~ 85°C (-49 ~ 185°F)
EN 50155: 2007, Clause 12.2.3
EN 60068-2-1:2007, test Ad. -40°C
Anti-Vibration
Compliant with EN 61373
Anti-Shock
Compliant with EN 61373

Railway Embedded Box PC AEV-6356
Chapter 2
Chapter 2 –Hardware Information

Chapter 2 –Hardware Information 5
Railway Embedded Box PC AEV-6356
2.1 Dimensions

Chapter 2 –Hardware Information 6
Railway Embedded Box PC AEV-6356
2.2 Jumpers and Connectors
Component side

Chapter 2 –Hardware Information 7
Railway Embedded Box PC AEV-6356
Solder Side